These stainless steel socket head, self tapping cap screws (with built-in washer) are extremely handy for mounting servos and small parts in any model aircraft. #2 X 7/16" SSSH, 75 PACK
$7.95Safety Wire - for fuel and airline connections. This aircraft grade stainless steel safety wire has been tested by BVM and packaged for convenient shop and in-the-field use. .020 SS WIRE
$6.00BVM Heavy Duty 1/8" OD, .066" ID Red 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50BVM Heavy Duty 1/8" OD, .066" ID White 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50BVM Heavy Duty 1/8" OD, .066" ID Blue 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50BVM Heavy Duty 1/8" OD, .066" ID Yellow 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50BVM Heavy Duty 1/8" OD, .066" ID Black 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50BVM Heavy Duty 1/8" OD, .066" ID Grey 12FT
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50Carbon Mat 8 1/2" X 22" 1/2 oz/sq. ft. 2 sheets
$14.75Ceramic heat blanket is used to protect your model from excessive heat and is ideal for use in engine bays and near tailpipes. Package includes (1) 12"x24" sheet of Ceramic Heat Blanket.
$14.95Use For All Mechanical Mating Parts Metal To Metal - Metal To Plastic Its light viscosity allows it to penetrate quickly and lubricate from within. Its formulation of high quality waxes and PTFE promote friction free operation. Its liquid carrier evaporates and leaves the friction relieving chemistry. It guards against rust and corrosion and it does not attract dirt. Especially good for electronically driven retractable landing gear and mechanical moving parts of pneumatic gear. CAUTON: DO NOT apply to pneumatic cylinders.
$11.00 $10.00Use For All Mechanical Mating Parts Metal To Metal - Metal To Plastic Its light viscosity allows it to penetrate quickly and lubricate from within. Its formulation of high quality waxes and PTFE promote friction free operation. Its liquid carrier evaporates and leaves the friction relieving chemistry. It guards against rust and corrosion and it does not attract dirt. Especially good for electronically driven retractable landing gear and mechanical moving parts of pneumatic gear. CAUTON: DO NOT apply to pneumatic cylinders.
$5.50Replacement for PermaGrit #RF9UF (no longer available) How to use: Drill 1/16 pilot hole in the F/G panel. operate this 90 Carbide Rotary Cutter at low RPM. Use a small Phillips Head Driver to install the flush panel screws (BVM # 2155)
$15.95Carbide Cutters (set of 5) We discovered some really great motor tool cutters that will really speed up your model building chores. These carbide cutters feature a drill point end with a fine tooth, high helix design cutting edge that really eats through plywood, fiberglass or carbon fiber. Each pack contains (2) 1/16", (2) 3/32", and (1) 1/8" diameter cutters all with a 1/8" shank to fit your motor tool. Once you try them, you'll never want to be without them and you can't beat the price! As always wear safety glasses when working with rotary cutters of any kind.
$28.95Scuff Boards 10pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
Scuff Boards 20pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
To compliment our pneumatic powered EZ-DROP, we also offer this similar device intended to ease the mounting and removal of external stores by simply pulling aft on the cable. Tanks, bombs and missiles really add to the "presence" and "scale realism" of jet models whether they be on static display or in action at 150 + m.p.h. Handling and transporting the model with external stores however, can be a cumbersome task and sometimes results in damage to fins or pylons. We think you will find the BVM EZ-Hangers a very handy accessory when adding some "parasites" to your jet. EZ-Hangers fit into the same size opening and utilize the same bolt pattern as the EZ-DROPS, they are interchangeable.
$25.95AIR OPERATED - SPRING RETURN BVM EZ-DROP simplifies the mounting and releasing of external stores without using a dedicated radio channel or servos. It operates via a single air line from the models retract system. Simply use the snap roll button to command a slight over travel on the retract system valve, and the tanks or bombs release instantly.
$39.95BVM Fill Chuck #2192 Fill Chuck swivel end to fit 1/4" hose on electronic pumps For use with BVM Fill Valve's.
$12.95We got
tired of fixing wing tip scratches and faced up to reality - it's just going to
happen occasionally. So, if your landings are not always perfect, you may also
find a need for some truly tough wingtip skids.
  Â
Air Gauges
(for retract/brake tank pressure readings, etc.)
Â
These dime size, high quality gauges serve as a quick check of the integrity of your model's air systems. The dial registers up to 150 psi in 10lb increments. A laser cut 1/8" plywood board serves as a convenient way to mount them by hand threading the boss into accurately cut holes. Factory installed barbed brass nipples will hold the air line very securely to the back side of the gauges. A package of 2 gauges also contains 2 "T" fittings and the mounting plate |
Carbon Fiber BobCat Composite Main Gear Flex Arms - pr
$45.00CF Main Flex Plates - Electra, Sport, Maverick, Agg, Agg III, Viper, Ultra Viper, and Maverick Pro.
$19.95Part of the Sabre jet turbine conversion kit are these new reinforcements for the main gear flex plates. Machined from laminated carbon fiber, they will add a great deal of strength and resistance to breaking of the flex plates while still allowing an appropriate amount of flexing during torturous landings. These retro fit parts can also be used with Mavericks, Ultra Viper and Aggressor III installations. These C.F. flex plates reinforcements are glued to the top side of the flex plates with Flex ZAP. Tap the predrilled holes #4-40 and install the 4-40 x 7/16" flat head screws that come with this upgrade kit.
$15.00CF Main Flex Plates- Super Bandit & Balsa Bandit-pr
$34.95Super Bandit, F-86 Nose Gear Flex Arms-pr Will work with the F-80/T-33 AFS with Purple Gear.
$16.50