SPECIFICATIONS: Wingspan: 1344mm (52.9in) Length: 1809mm (71.2in) Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene) Turbine Engine: 6-8KG brushless (required & not included) Cruising speed: 150-200 km/h Flying time: 3-5 mins Wing area: 47.6 dm2 Wing load: 178.6 g/dm2 Main material: 20 times the import of aeromodelling EPO Painting surface: Matte environmental water-borne paint + decal Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty: ??10mins ???30mins ???60mins Suitable for ambient temperature: 0C-40 Radio System: 6 channel (required & not included) Control System: MFC-2085 Servos (All 7.4V High voltage) 40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward) 25gx2 Metal gear with 150mm lead (left & right Aileron forward) 25gx1 Metal gear with 230mm lead (Rudder forward) 12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward) 12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward) 12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward) 12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward) Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons: Yes Flaps: No Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm) CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing Landing Gears All-metal simulation electronic retractable landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Nosex1 Cockpit canopyx1 Vertical Stabilizerx1 Left Horizontal tailx1 Right Horizontal tailx1 L/R Auxiliary tankx1 L/R wingtip missilex1 L/R wingtip missile pylonx1 L/R No.1 missilex1 L/R No.2 missilex1 L/R tail finsx1 Main wing carbon tube L=400mm external diameter 10mmx2 Accessories Bag x1 Fuselage antenna x1 Pitotx1 Screw (HA3x14mm)x10 (Nose & Engine) Screw (HM3x6mm)x2 (Horizontal tail) Screw (HA3x10mm)x8 (Tail nozzle & Vertical) Screw (KA3x16mm)x8 (Missile) Screw (KA3x20mm)x8 (Missile) Screw (KM3x60mm)x8 (Auxiliary tank) Screw (HM3x10mm)x8 (Main wing) HF-16 V2 Manualx1 MFC-2085 Manualx1 REQUIRES: SW 6-8KG brushless (required & not included) 6 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included) LiPo battery charger (required & not included)
$1,529.90SPECIFICATIONS: Wingspan: 1344mm (52.9in) Length: 1809mm (71.2in) Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene) Turbine Engine: 6-8KG brushless (required & not included) Cruising speed: 150-200 km/h Flying time: 3-5 mins Wing area: 47.6 dm2 Wing load: 178.6 g/dm2 Main material: 20 times the import of aeromodelling EPO Painting surface: Matte environmental water-borne paint + decal Suitable for ambient temperature: 0C-40 Radio System: 6 channel (required & not included) Control System: MFC-2085 Servos (All 7.4V High voltage) 40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward) 25gx2 Metal gear with 150mm lead (left & right Aileron forward) 25gx1 Metal gear with 230mm lead (Rudder forward) 12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward) 12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward) 12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward) 12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward) Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons: Yes Flaps: No Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm) CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing Landing Gears All-metal simulation electronic retractable landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Nosex1 Cockpit canopyx1 Vertical Stabilizerx1 Left Horizontal tailx1 Right Horizontal tailx1 L/R Auxiliary tankx1 L/R wingtip missilex1 L/R wingtip missile pylonx1 L/R No.1 missilex1 L/R No.2 missilex1 L/R tail finsx1 Main wing carbon tube L=400mm external diameter 10mmx2 Accessories Bag x1 Fuselage antenna x1 Pitotx1 Screw (HA3x14mm)x10 (Nose & Engine) Screw (HM3x6mm)x2 (Horizontal tail) Screw (HA3x10mm)x8 (Tail nozzle & Vertical) Screw (KA3x16mm)x8 (Missile) Screw (KA3x20mm)x8 (Missile) Screw (KM3x60mm)x8 (Auxiliary tank) Screw (HM3x10mm)x8 (Main wing) HF-16 V2 Manualx1 MFC-2085 Manualx1 REQUIRES: SW 6-8KG brushless (required & not included) 6 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order. Q: What does KIT means? A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves. Â Q: What does KIT+L means? A: It's a KIT version but comes with landing gear installed. Â Q: What does PNP means? A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system(UBEC included but no power supply), light cables(according to the model of aircrafts).It's a 90% installation. Note: turbojet series products do not include turbojet engine. Â Q: What does PNP+T means? A: It's a PNP version with engine(general means turbine) installed and tested. It's a 95% installation. Â Q: What does RTF means? A: It means the aircraft comes with completely equipment installation(including battery supply, charger, remote control and receiver). It's a 100% installation.
$1,569.90SPECIFICATIONS: Wingspan 1720 mm (67.7 in) Length 1715 mm (67.5 in) Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene Configuration of turbine engine 7KG-10KG (required & not included) Cruising speed 160-180 km/h Flying time 6-8 mins (full throttle) Wing area 64.34 dm2 Wing load 163.2 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Servos 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch) CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear×3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs Horizontal tailx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs Main wing carbon tube L=598mm external diameter 16mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA4x45mm)x4 pcs (Horizontal tail) Screw (HM4x20mm)x4 pcs (Wing) Screw (HM4x16mm)x4 pcs (Wing) Screw (HA3x10mm)x16 pcs (Vertical tail / Nose) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x60mm)x4 pcs (Nose) Screw (HM4x70mm)x8 pcs (Auxiliary tank) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Manualx1 pcs REQUIRES: 7KG-10KG turbine engine (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,669.90SPECIFICATIONS: Wingspan 1720 mm (67.7 in) Length 1715 mm (67.5 in) Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene Configuration of turbine engine 7KG-10KG (required & not included) Cruising speed 160-180 km/h Flying time 6-8 mins (full throttle) Wing area 64.34 dm2 Wing load 163.2 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Servos 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch) CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear×3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs Horizontal tailx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs Main wing carbon tube L=598mm external diameter 16mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA4x45mm)x4 pcs (Horizontal tail) Screw (HM4x20mm)x4 pcs (Wing) Screw (HM4x16mm)x4 pcs (Wing) Screw (HA3x10mm)x16 pcs (Vertical tail / Nose) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x60mm)x4 pcs (Nose) Screw (HM4x70mm)x8 pcs (Auxiliary tank) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Manualx1 pcs REQUIRES: 7KG-10KG turbine engine (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,669.90SPECIFICATIONS: Wingspan 1300 mm (51.2 in) Length 2115 mm (83.3 in) Weight --- Turbine Engine 8KG-12KG (required & not included) Cruising speed --- Flying time --- Wing area 64 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 10 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Canard wing Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Selective configuration (not included) LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Vectoring nozzle Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch) CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Canard wingx1 pcs Air inletx1 pcs Caudal finx1 pcs 1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA3x10mm)x6 pcs (Horizontal tail) Screw (HM3x65mm)x2 pcs (Wing) Screw (HM4x45mm)x4 pcs (Wing) Screw (HM3x6mm)x4 pcs (Vertical tail / Nose) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 10 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$899.90SPECIFICATIONS: Wingspan 1300 mm (51.2 in) Length 2115 mm (83.3 in) Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene Configuration of turbine engine 8KG-12KG (required & not included) Cruising speed 160-180 km/h Flying time 4-6 mins (full throttle) Wing area 64 dm2 Wing load 164.1 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 10 channel (required & not included) Control System MFC-2085 Servos 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Canard wing Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Yes LED lights system Yes Electromagnetic brake system Yes Vectoring nozzle Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/60x21.3x14.8(inch) CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Canard wingx1 pcs Air inletx1 pcs Caudal finx1 pcs 1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA3x10mm)x6 pcs (Horizontal tail) Screw (HM3x65mm)x2 pcs (Wing) Screw (HM4x45mm)x4 pcs (Wing) Screw (HM3x6mm)x4 pcs (Vertical tail / Nose) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 10 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,699.90SPECIFICATIONS: Wingspan 1300 mm (51.2 in) Length 2115 mm (83.3 in) Weight --- Turbine Engine 8KG-12KG (required & not included) Cruising speed --- Flying time --- Wing area 64 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 10 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Canard wing Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Selective configuration (not included) LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Vectoring nozzle Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch) CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Canard wingx1 pcs Air inletx1 pcs Caudal finx1 pcs 1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA3x10mm)x6 pcs (Horizontal tail) Screw (HM3x65mm)x2 pcs (Wing) Screw (HM4x45mm)x4 pcs (Wing) Screw (HM3x6mm)x4 pcs (Vertical tail / Nose) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 10 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$899.90HSDJETS HJ-10 Foam Turbine CAF NEW (DARK BLUE) Colors PNP with Vectoring nozzle SPECIFICATIONS: Wingspan 1300 mm (51.2 in) Length 2115 mm (83.3 in) Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene Configuration of turbine engine 8KG-12KG (required & not included) Cruising speed 160-180 km/h Flying time 4-6 mins (full throttle) Wing area 64 dm2 Wing load 164.1 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 10 channel (required & not included) Control System MFC-2085 Servos 7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward) 7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward) 7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Canard wing Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Yes LED lights system Yes Electromagnetic brake system Yes Vectoring nozzle Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/60x21.3x14.8(inch) CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Canard wingx1 pcs Air inletx1 pcs Caudal finx1 pcs 1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA3x10mm)x6 pcs (Horizontal tail) Screw (HM3x65mm)x2 pcs (Wing) Screw (HM4x45mm)x4 pcs (Wing) Screw (HM3x6mm)x4 pcs (Vertical tail / Nose) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 10 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,699.90SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Weight --- Turbine Engine 8KG (required & not included) Cruising speed --- Flying time --- Wing area 47 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Selective configuration (not included) Speed brake No LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Leading edge flap No Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear 3(Nose gear single wheel) (required not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 10 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$669.90SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene Configuration of turbine engine 8KG (required & not included) Cruising speed -200 km/h Flying time 4-6 mins (full throttle) Wing area 47 dm2 Wing load 195.7 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 Servos 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Included Speed brake Yes LED lights system Yes Electromagnetic brake system Yes Leading edge flap Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male + JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG turbine engine (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,499.90**Does Include Correct Tail Marking Decals** SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Weight --- Turbine Engine 8KG (required & not included) Cruising speed --- Flying time --- Wing area 47 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Selective configuration (not included) Speed brake Selective configuration (not included) LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Leading edge flap Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pc Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male + JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x2 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG turbine engine (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$689.90**Does Include Correct Tail Marking Decals** SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene Configuration of turbine engine 8KG (required & not included) Cruising speed -200 km/h Flying time 4-6 mins (full throttle) Wing area 47 dm2 Wing load 195.7 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 Servos 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Included Speed brake Yes LED lights system Yes Electromagnetic brake system Yes Leading edge flap Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male + JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG turbine engine (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,599.90SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Weight --- Turbine Engine 8KG (required & not included) Cruising speed --- Flying time --- Wing area 47 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Selective configuration (not included) Speed brake Selective configuration (not included) LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Leading edge flap Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pc Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male + JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x2 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG turbine engine (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos (required & not included) 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$689.90SPECIFICATIONS: Wingspan 1500 mm (59.1 in) Length 1900 mm (74.8 in) Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene Configuration of turbine engine 8KG (required & not included) Cruising speed -200 km/h Flying time 4-6 mins (full throttle) Wing area 47 dm2 Wing load 195.7 g/dm2 Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ??10mins ???30mins ???60mins Suitable for ambient temperature 0C-40C Radio System 9 channel (required & not included) Control System MFC-2085 Servos 7.4V 40gx1 Metal gear with 80mm lead (Elevator forward) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward) 7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward) 7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward) 7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator Yes Rudder (Vertical tail) Yes The smoke system Included Speed brake Yes LED lights system Yes Electromagnetic brake system Yes Leading edge flap Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch) CG (Center of Gravity) 161 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs L&R Horizontal tailx1 pcs Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail) Screw (HM4x50mm)x4 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male + JR male) x8 pcs Accessories Bag 3 x1 pcs Filler tube x1 pcs Left and right pitot tubes x2 pcs Nose radar antenna x1 pcs Upper and lower fuselage antenna x2 pcs Remove the ribbon before flight x1 pcs Oil tank overflow vent plug x1 pcs Manualx1 pcs REQUIRES: 8KG turbine engine (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included)
$1,599.90SPECIFICATIONS: Wingspan 1800mm (70.87in) Length 2000mm (78.74in) Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil Recommended engine thrust 10-12 kg / 20-26.4 (lb) Cruising speed 260 km/h Flying time 6-8 mins Wing area 67.94 dm2 Wing load 174.57 g/dm2 Main material FRP Painting surface Highlight environmental protection paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ?10mins ?30mins ?60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included) Recommended Power Battery According to engine matching (required & not included) Servos 25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward) 25gx2 Metal gear with 90mm lead (Flap, forward) 25gx2 Metal gear with 90mm lead (Elevator, forward) 12gx1 Metal gear with 500mm lead (Nose wheel steering, forward) 12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward) Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Smoking system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm) CG (Center of Gravity) 180-185 mm leading edge of main wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=850mm external diameter 20mmx1 Horizontal Stabilizer tube L=425mm external diameter 8mmx1 Accessories Bag 1 x1 Screw (HA3x14mm)x6 (Engine) Oil tank overflow exhaust seat plugx1 Marking tapex1 100mm signal linex8 100mm High precision Y-linex1 Manualx1(Temporarily lacking) REQUIRES: 8 channel radio system (radio & receiver) (required & not included) 2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included) According to engine matching Power Batteryx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$2,999.90SPECIFICATIONS: Wingspan 1800mm (70.87in) Length 2000mm (78.74in) Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil Recommended engine thrust 10-12 kg / 20-26.4 (lb) Cruising speed 260 km/h Flying time 6-8 mins Wing area 67.94 dm2 Wing load 174.57 g/dm2 Main material FRP Painting surface Highlight environmental protection paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ?10mins ?30mins ?60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included) Recommended Power Battery According to engine matching (required & not included) Servos 25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward) 25gx2 Metal gear with 90mm lead (Flap, forward) 25gx2 Metal gear with 90mm lead (Elevator, forward) 12gx1 Metal gear with 500mm lead (Nose wheel steering, forward) 12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward) Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Smoking system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm) CG (Center of Gravity) 180-185 mm leading edge of main wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=850mm external diameter 20mmx1 Horizontal Stabilizer tube L=425mm external diameter 8mmx1 Accessories Bag 1 x1 Screw (HA3x14mm)x6 (Engine) Oil tank overflow exhaust seat plugx1 Marking tapex1 100mm signal linex8 100mm High precision Y-linex1 Manualx1(Temporarily lacking) REQUIRES: 8 channel radio system (radio & receiver) (required & not included) 2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included) According to engine matching Power Batteryx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$2,999.90SPECIFICATIONS: Wingspan 1800mm (70.87in) Length 2000mm (78.74in) Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil Recommended engine thrust 10-12 kg / 20-26.4 (lb) Cruising speed 260 km/h Flying time 6-8 mins Wing area 67.94 dm2 Wing load 174.57 g/dm2 Main material FRP Painting surface Highlight environmental protection paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ?10mins ?30mins ?60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included) Recommended Power Battery According to engine matching (required & not included) Servos 25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward) 25gx2 Metal gear with 90mm lead (Flap, forward) 25gx2 Metal gear with 90mm lead (Elevator, forward) 12gx1 Metal gear with 500mm lead (Nose wheel steering, forward) 12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward) Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Smoking system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm) CG (Center of Gravity) 180-185 mm leading edge of main wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=850mm external diameter 20mmx1 Horizontal Stabilizer tube L=425mm external diameter 8mmx1 Accessories Bag 1 x1 Screw (HA3x14mm)x6 (Engine) Oil tank overflow exhaust seat plugx1 Marking tapex1 100mm signal linex8 100mm High precision Y-linex1 Manualx1(Temporarily lacking) REQUIRES: 8 channel radio system (radio & receiver) (required & not included) 2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included) According to engine matching Power Batteryx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$2,999.90SPECIFICATIONS: Wingspan 1800mm (70.87in) Length 2000mm (78.74in) Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil Recommended engine thrust 10-12 kg / 20-26.4 (lb) Cruising speed 260 km/h Flying time 6-8 mins Wing area 67.94 dm2 Wing load 174.57 g/dm2 Main material FRP Painting surface Highlight environmental protection paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced PNP Assembly difficulty ?10mins ?30mins ?60mins Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included) Recommended Power Battery According to engine matching (required & not included) Servos 25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward) 25gx2 Metal gear with 90mm lead (Flap, forward) 25gx2 Metal gear with 90mm lead (Elevator, forward) 12gx1 Metal gear with 500mm lead (Nose wheel steering, forward) 12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward) Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Smoking system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm) CG (Center of Gravity) 180-185 mm leading edge of main wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=850mm external diameter 20mmx1 Horizontal Stabilizer tube L=425mm external diameter 8mmx1 Accessories Bag 1 x1 Screw (HA3x14mm)x6 (Engine) Oil tank overflow exhaust seat plugx1 Marking tapex1 100mm signal linex8 100mm High precision Y-linex1 Manualx1(Temporarily lacking) REQUIRES: 8 channel radio system (radio & receiver) (required & not included) 2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included) According to engine matching Power Batteryx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$2,999.90SPECIFICATIONS: Wingspan: 1665 mm (65.6 in) Length: 1916 mm (75.4 in) Weight: 8.5kg (18.7 lb) Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 100-140 km/h (For reference only) Flying time: 4-6 mins (full throttle) (For reference only) Wing area: 54 dm2 Wing load: 195 g/dm2 (For reference only) Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 9 channel (required & not included) Control System: MFC-2085 (required & not included) Servos (required & not included) 7.4V 25gX2 Metal gear with 80mm lead (left & right ailerons forward) 7.4V 25gX2 Metal gear with 80mm lead (FlapX2 forward) 7.4V 25gX3 Metal gear with 80mm lead (Elevatorx2 & Rudderx1 forward) 7.4V 12gX1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gX1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gX2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) 7.4V 12gX2 Metal gear with 80mm lead with protection function (Retarder plate forward) Recommended Battery: 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Retarder plate Yes Smoke System No LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark) /52.87x20.28x17.72 (inch) CG (Center of Gravity) 120-125mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=598mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=598mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=600mm external diameter 6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x12 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x10mm)x8 pcs (Wing) Screw (PWM6x70mm)x8 pcs (Nose) 100mm signal line(JR male + JR male)x8 pcs Pneumatic tubex2 pcs Cue streamersx1 pcs Bucklex1 pcs Anti-corrosion rubber plugx1 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$799.90 $679.90SPECIFICATIONS: Wingspan: 1665 mm (65.6 in) Length: 1916 mm (75.4 in) Flying Weight: 10.5kg (23.1 lb) with 1800cc Aviation kerosene and 750cc smoke Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 100-140 km/h Flying time: 4-6 mins (full throttle) Wing area: 54 dm2 Wing load: 195 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System:9 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 80mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (Elevatorx2 & Rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward) Recommended Battery: 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons: Yes Flaps: Yes Elevator (Horizontal tail): Yes Rudder (Vertical tail): Yes LED lights system: Yes Electromagnetic brake system: Yes Retarder plate: Yes Smoke System: Selective configuration (not included) Reinforced gyro: Selective configuration (not included) Packaging / Size: Packing Box + Outer Box (Card mark)/52.87x20.28x17.72(inch) CG (Center of Gravity): 120-125mm from the leading edge of the Main Wing Landing Gears: Metal electric retractable hydraulic landing gear×3 Battery Charger: LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=598mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=598mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=600mm external diameter 6mmx1 pcs Accessories Bagx1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x10mm)x8 pcs (Wing) Screw (PWM6x70mm)x8 pcs (Nose) 100mm signal line(JR male + JR male)x8 pcs Pneumatic tubex2 pcs Cue streamersx1 pcs Bucklex1 pcs Anti-corrosion rubber plugx1 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,889.90 $1,549.90SPECIFICATIONS: Wingspan: 1665 mm (65.6 in) Length: 1916 mm (75.4 in) Weight: 8.5kg (18.7 lb) Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 100-140 km/h (For reference only) Flying time: 4-6 mins (full throttle) (For reference only) Wing area: 54 dm2 Wing load: 195 g/dm2 (For reference only) Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 9 channel (required & not included) Control System: MFC-2085 (required & not included) Servos (required & not included) 7.4V 25gx2 Metal gear with 80mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (Elevatorx2 & Rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward) Recommended Battery: 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes Retarder plate Yes Smoke System No LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark) /52.87x20.28x17.72 (inch) CG (Center of Gravity) 120-125mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=598mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=598mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=600mm external diameter 6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x12 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x10mm)x8 pcs (Wing) Screw (PWM6x70mm)x8 pcs (Nose) 100mm signal line(JR male + JR male)x8 pcs Pneumatic tubex2 pcs Cue streamersx1 pcs Bucklex1 pcs Anti-corrosion rubber plugx1 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$799.90 $679.90SPECIFICATIONS: Wingspan: 1665 mm (65.6 in) Length: 1916 mm (75.4 in) Flying Weight: 10.5kg (23.1 lb) with 1800cc Aviation kerosene and 750cc smoke Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 100-140 km/h Flying time: 4-6 mins (full throttle) Wing area: 54 dm2 Wing load: 195 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System:9 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 80mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 80mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (Elevatorx2 & Rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward) Recommended Battery: 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons: Yes Flaps: Yes Elevator (Horizontal tail): Yes Rudder (Vertical tail): Yes LED lights system: Yes Electromagnetic brake system: Yes Retarder plate: Yes Smoke System: Selective configuration (not included) Reinforced gyro: Selective configuration (not included) Packaging / Size: Packing Box + Outer Box (Card mark)/52.87x20.28x17.72(inch) CG (Center of Gravity): 120-125mm from the leading edge of the Main Wing Landing Gears: Metal electric retractable hydraulic landing gearx3 Battery Charger: LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=598mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=598mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=600mm external diameter 6mmx1 pcs Accessories Bagx1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x10mm)x8 pcs (Wing) Screw (PWM6x70mm)x8 pcs (Nose) 100mm signal line(JR male + JR male)x8 pcs Pneumatic tubex2 pcs Cue streamersx1 pcs Bucklex1 pcs Anti-corrosion rubber plugx1 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 9 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,889.90 $1,549.90SPECIFICATIONS: Wingspan: 2018 mm (79.4 in) Length: 1800 mm (70.9 in) Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 150-200 km/h Flying time: 3-5 mins (full throttle) Wing area: 56.5 dm2 Wing load: 184.1 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 230mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (elevatorx2 & rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) Recommended Battery 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box(Card mark)/52.56x21.3x16.9(inch) CG (Center of Gravity) 180mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear×3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=820mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=760mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=650mm external diameter 6mmx1 pcs Accessories Bag 1x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM3x14mm)x8 pcs (Wing) Screw (HM4x25mm)x8 pcs (Auxiliary tank) Screw (PWM6x70mm)x6 pcs (Nose) Accessories Bag 2x1 pcs 100mm signal line(JR male+JR male)x8 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 7 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,889.90 $1,549.90SPECIFICATIONS: Wingspan: 2018 mm (79.4 in) Length: 1800 mm (70.9 in) Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene Turbine Engine: SW80B 8KG brushless (required) Cruising speed: 150-200 km/h Flying time: 3-5 mins (full throttle) Wing area: 56.5 dm2 Wing load: 184.1 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 230mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (elevatorx2 & rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) Recommended Battery 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box(Card mark)/52.56x21.3x16.9(inch) CG (Center of Gravity) 180mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=820mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=760mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=650mm external diameter 6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM3x14mm)x8 pcs (Wing) Screw (HM4x25mm)x8 pcs (Auxiliary tank) Screw (PWM6x70mm)x6 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male+JR male) x8 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required) 7 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$3,529.90 $3,229.90SPECIFICATIONS: Wingspan: 2018 mm (79.4 in) Length: 1800 mm (70.9 in) Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) Cruising speed: 150-200 km/h Flying time: 3-5 mins (full throttle) Wing area: 56.5 dm2 Wing load: 184.1 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 230mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (elevatorx2 & rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) Recommended Battery 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box(Card mark)/52.56x21.3x16.9(inch) CG (Center of Gravity) 180mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear×3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=820mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=760mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=650mm external diameter 6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM3x14mm)x8 pcs (Wing) Screw (HM4x25mm)x8 pcs (Auxiliary tank) Screw (PWM6x70mm)x6 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male+JR male) x8 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required & not included) 7 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,889.90 $1,549.90SPECIFICATIONS: Wingspan: 2018 mm (79.4 in) Length: 1800 mm (70.9 in) Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene Turbine Engine: SW80B 8KG brushless (required) Cruising speed: 150-200 km/h Flying time: 3-5 mins (full throttle) Wing area: 56.5 dm2 Wing load: 184.1 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) Control System: MFC-2085 Servos 7.4V 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 7.4V 25gx2 Metal gear with 230mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 80mm lead (elevatorx2 & rudderx1 forward) 7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward) 7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward) Recommended Battery 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box(Card mark)/52.56x21.3x16.9(inch) CG (Center of Gravity) 180mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Left Horizontal tailx1 pcs Right Horizontal tailx1 pcs Vertical tailx1 pcs Nosex1 pcs Cockpitx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs 1# Main wing carbon tube L=820mm external diameter 16mmx1 pcs 2# Main wing carbon tube L=760mm external diameter 10mmx1 pcs Horizontal Stabilizer carbon tube L=650mm external diameter 6mmx1 pcs Accessories Bag 1 x1 pcs Screw (HM3x10mm)x8 pcs (Horizontal tail) Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM3x14mm)x8 pcs (Wing) Screw (HM4x25mm)x8 pcs (Auxiliary tank) Screw (PWM6x70mm)x6 pcs (Nose) Accessories Bag 2 x1 pcs 100mm signal line(JR male+JR male) x8 pcs Manualx1 pcs REQUIRES: SW80B 8KG brushless / SW60B 6KG brushless (required) 7 channel radio system (radio & receiver) (required & not included) 2S,7.4V,5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$3,529.90 $3,229.90SPECIFICATIONS: Wingspan: 1500mm (59.1in) Length: 1663mm (65.5in) Flying Weight: 6.5kg (14.3 lb) Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included) Cruising speed:250 km/h Flying time: 5 mins (full throttle) Wing area: 34.28 dm2 Wing load:189.6 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System 8 channel: (required & not included) Control System MFC-2085 Servos 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 25gx3 Metal gear with 190mm lead (Flapx2 & rudderx1 forward) 25gx2 Metal gear with 80mm lead (elevator forward) 12gx1 Metal gear with 300mm lead (Nose wheel steering forward) 12gx1 Metal gear (360lock Hatch cover forward) Recommended Battery 2S,7.4V,1800-2000mAhx2,LiPo with T type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm) CG (Center of Gravity) 170mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=598mm external diameter 16mmx1 Horizontal Stabilizer carbon tube L=500mm external diameter 6mmx1 Stickerx1 Capping boardx1 Accessories Bag 1 x1 Nylon rocker arm of the servo x2 Double sided sponge paperx1 Screw (HM4x35mm)x4 (Nose) Screw (HM3x14mm)x2 (Wing) Screw (HM3x10mm)x2 (Wing) Screw (PA3x14mm)x4 (Engine) Screw (PA3x10mm)x4 (Tail nozzle) Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Accessories Bag 2 x1 L type 3mm inner six corner board handx1 Screw (HM4x35mm)x4 (Nose) Screw (HM3x14mm)x2 (Wing) Screw (HM3x10mm)x2 (Wing) Screw (PA3x14mm)x4 (Engine) Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Manualx1 REQUIRES: SW60 6KG brushed / SW60B 6KG brushless (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,1800-2000mAhx2,LiPo with T type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,529.90 $1,399.90SPECIFICATIONS: Wingspan: 1500mm (59.1in) Length: 1663mm (65.5in) Flying Weight: 6.5kg (14.3 lb) Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included) Cruising speed:250 km/h Flying time: 5 mins (full throttle) Wing area: 34.28 dm2 Wing load:189.6 g/dm2 Main material: 20 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System 8 channel: (required & not included) Control System MFC-2085 Servos 25gx2 Metal gear with 480mm lead (left & right ailerons forward) 25gx3 Metal gear with 190mm lead (Flapx2 & rudderx1 forward) 25gx2 Metal gear with 80mm lead (elevator forward) 12gx1 Metal gear with 300mm lead (Nose wheel steering forward) 12gx1 Metal gear (360lock Hatch cover forward) Recommended Battery 2S,7.4V,1800-2000mAhx2,LiPo with T type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system Yes LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm) CG (Center of Gravity) 170mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing carbon tube L=598mm external diameter 16mmx1 Horizontal Stabilizer carbon tube L=500mm external diameter 6mmx1 Stickerx1 Capping boardx1 Accessories Bag 1 x1 Nylon rocker arm of the servo x2 Double sided sponge paperx1 Screw (HM4x35mm)x4 (Nose) Screw (HM3x14mm)x2 (Wing) Screw (HM3x10mm)x2 (Wing) Screw (PA3x14mm)x4 (Engine) Screw (PA3x10mm)x4 (Tail nozzle) Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Accessories Bag 2 x1 L type 3mm inner six corner board handx1 Screw (HM4x35mm)x4 (Nose) Screw (HM3x14mm)x2 (Wing) Screw (HM3x10mm)x2 (Wing) Screw (PA3x14mm)x4 (Engine) Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Manualx1 REQUIRES: SW60 6KG brushed / SW60B 6KG brushless (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,1800-2000mAhx2,LiPo with T type plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,529.90 $1,399.90NOT RECOMMENDED FOR GRASS RUNWAYS SPECIFICATIONS: Wingspan: 1344mm (52.9in) Length: 1809mm (71.2in) Flying Weight ---- Turbine Engine 6-8KG brushless (required & not included) Cruising speed ---- Flying time ---- Wing area 47.6 dm2 Wing load ---- Main material 20 times the import of aeromodelling EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced Suitable for ambient temperature 0C-40C Radio System 6 channel (required & not included) Control System ---- Servos (required & not included) 40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward) 25gx2 Metal gear with 150mm lead (left & right Aileron forward) 25gx1 Metal gear with 230mm lead (Rudder forward) 12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward) 12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward) 12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward) 12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward) Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps No Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system No Electromagnetic brake system No Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/1456x518x337(mm) CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing Landing Gears ---- Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Nosex1 Cockpit canopyx1 Vertical Stabilizerx1 Left Horizontal tailx1 Right Horizontal tailx1 L/R Auxiliary tank x1 L/R wingtip missile x1 L/R wingtip missile pylon x1 L/R No.1 missile x1 L/R No.2 missile x1 L/R tail fins x1 Main wing carbon tube L=400mm external diameter 10mmx2 Accessories Bag x1 Fuselage antenna x1 Pitotx1 Screw (HA3x14mm)x10 (Nose & Engine) Screw (HM3x6mm)x2 (Horizontal tail) Screw (HA3x10mm)x8 (Tail nozzle & Vertical) Screw (KA3x16mm)x8 (Missile) Screw (KA3x20mm)x8 (Missile) Screw (KM3x60mm)x8 (Auxiliary tank) Screw (HM3x10mm)x8 (Main wing) HF-16 V2 Manualx1 MFC-2085 Manualx1 REQUIRES: SW 6-8KG brushless (required & not included) 6 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$699.90 $599.90Not recommended for grass runways SPECIFICATIONS: Wingspan: 1344mm (52.9in) Length: 1809mm (71.2in) Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene) Turbine Engine: 6-8KG brushless (required & not included) Cruising speed: 150-200 km/h Flying time: 3-5 mins Wing area: 47.6 dm2 Wing load: 178.6 g/dm2 Main material: 20 times the import of aeromodelling EPO Painting surface: Matte environmental water-borne paint + decal Suitable for ambient temperature: 0C-40 Radio System: 6 channel (required & not included) Control System: MFC-2085 Servos (All 7.4V High voltage) 40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward) 25gx2 Metal gear with 150mm lead (left & right Aileron forward) 25gx1 Metal gear with 230mm lead (Rudder forward) 12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward) 12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward) 12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward) 12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse) 12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward) Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons: Yes Flaps: No Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Yes Electromagnetic brake system Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm) CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing Landing Gears All-metal simulation electronic retractable landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Nosex1 Cockpit canopyx1 Vertical Stabilizerx1 Left Horizontal tailx1 Right Horizontal tailx1 L/R Auxiliary tankx1 L/R wingtip missilex1 L/R wingtip missile pylonx1 L/R No.1 missilex1 L/R No.2 missilex1 L/R tail finsx1 Main wing carbon tube L=400mm external diameter 10mmx2 Accessories Bag x1 Fuselage antenna x1 Pitotx1 Screw (HA3x14mm)x10 (Nose & Engine) Screw (HM3x6mm)x2 (Horizontal tail) Screw (HA3x10mm)x8 (Tail nozzle & Vertical) Screw (KA3x16mm)x8 (Missile) Screw (KA3x20mm)x8 (Missile) Screw (KM3x60mm)x8 (Auxiliary tank) Screw (HM3x10mm)x8 (Main wing) HF-16 V2 Manualx1 MFC-2085 Manualx1 REQUIRES: SW 6-8KG brushless (required & not included) 6 channel radio system (radio & receiver) (required & not included) 2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order. Q: What does KIT means? A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves. Q: What does KIT+L means? A: It's a KIT version but comes with landing gear installed. Q: What does PNP means? A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system(UBEC included but no power supply), light cables(according to the model of aircrafts).It's a 90% installation. Note: turbojet series products do not include turbojet engine. Q: What does PNP+T means? A: It's a PNP version with engine(general means turbine) installed and tested. It's a 95% installation. Q: What does RTF means? A: It means the aircraft comes with completely equipment installation(including battery supply, charger, remote control and receiver). It's a 100% installation.
$1,569.90