HSDJETS S-EDF 120mm HT-33 Thunderbirds Colors PNP 12S

SPECIFICATIONS:
Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 7.5kg (16.5 lb)
Cruising speed: 150-180 km/h
Flying time: 3-5 mins
Wing area: 56.5 dm2
Wing load: 132.8 g/dm2
Main material: 35 times EPO
Painting surface: Matte environmental water-borne paint + decal
Suitable for ambient temperature: 0C-40C
Radio System: 7 channel (required & not included)
Control System: MFC-2085
Power System: 120mm S-EDF with Hobbywing 5268 Inner rotor motor
ESC: Hobbywing 160A

Servos 
7.4V 25gx2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25gx2 Metal gear with 230mm lead (Flapx2 forward)
7.4V 25gx3 Metal gear with 80mm lead (elevatorx2 & rudderx1 forward)
7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery: 6S, 22.2V, 5200mAh, 45Cx2, LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery: 2S, 7.4V, 2200-32000mAhx2, LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: Yes
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
LED lights system: Yes
Electromagnetic brake system: Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) / 52.56 x 21.3 x 16.9 (inch)
CG (Center of Gravity): 180mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gear x3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Vertical tailx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Left auxiliary tankx1 pcs
Right auxiliary tankx1 pcs
1# Main wing carbon tube L=820mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=760mm external diameter 10mmx1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x8 pcs (Horizontal tail)
Screw (HA3x10mm)x8 pcs (Vertical tail / Tail nozzle)
Screw (HA3x14mm)x8 pcs (Power)
Screw (HM3x14mm)x8 pcs (Wing)
Screw (HM4x25mm)x8 pcs (Auxiliary tank)
Screw (PWM6x70mm)x6 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male + JR male) x8 pcs
Manualx1 pcs

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
2S,7.4V,2200-3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.