English
Categories
- PNP/Go Fly Accessories
- Kit Accessories
- HSD Jets
- |_ EDF JETS
- |_ TURBINE JETS
- PowerBox
- Carbon Fiber
- Air Systems
- Accessories
- Installation Organizers
- Building Materials
- Finishing Materials
- Adhesives
- Electric VioFan (EVF)
- Chargers / Power Supplies
- Electric Accessories
- Batteries
- Turbine Mounts & Straps
- Turbine Accessories
- Fuel Cells
- Fuel System Accessories
- Jersey Modeler
- Cockpits
- Lubricants
- PermaGrit
- Tools
- Radio Gear
- Pilots
- Landing Gear
- Wheels Tires and Brakes
- Jet Cases / Cradles
- Specials
- Apparel and Gifts
- Books
- Gift Certificates
- Penn Bags
HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors KIT
SPECIFICATIONS:
Wingspan:1245mm (49in)
Length:1809mm (71.2in)
Weight: 3.1kg (6.82 lb) (for reference only )
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless (required & not included)
Number of EDF Blade: 11 blades (required & not included)
Cruising speed: about 180 km/h (For reference only )
Flying time: about 3-5 mins (For reference only )
Wing area: 47 dm2
Wing load: 129.8 g/dm2 (For reference only )
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150 (required & not included)
Control System: MFC-2085 (required & not included)
Servos: (required & not included)
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360 lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: No
LED lights system: No
Electromagnetic brake system: No
Reinforced gyro selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/145.6x51.8x33.7(cm)
CG (Center of Gravity): 178mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=320mm diameter=10mmx2
White Stickerx1
Accessories Bag 1 x1
Horizontal steel wire rod(3x88mm)x2 (Horizontal Stabilizer)
Aileron steel wire rod(1.8x88mm)x2 (Aileron)
Wing lampshadex2
Fuselage lampshadex6
Vertical Stabilizer lampshadex2
Nylon cable tiesx5
Screw (PWA2x8mm)x8 (Control box)
Steering steel wire(1.5x35mm)x1 (Nose landing gear)
Wire rod steel wire(1.8x60mm)x1 (Vertical Stabilizer)
Wire rod steel wire(1.7x65mm)x1 (Nose wheel locking servo)
Wire rod steel wire(1.7x65mm)x1 (Left wheel locking servo)
Wire rod steel wire(1.2x41mm)x2 (Main wheel Cover)
Wire rod steel wire(1.2x41mm)x1 (Nose wheel Cover)
Screw (PM2.5x6mm)x1 (Main wheel Cover)
Screw (PM2.5x10mm)x1 (Main wheel Cover)
Wire rod steel wire(1.7x80mm)x1 (Right wheel locking servo)
Screw (PM3x12mm)x4 (Horizontal Stabilizer rod fixation with self-locking nut)
Screw (PM2x10mm)x6 (Wing/vertical Stabilizer rod fixation with self-locking nut)
Accessories Bag 2 x1
Screw (HM3x6mm)x2 (Horizontal Stabilizer)
Screw (HA3x10mm)x4 (Tail nozzle)
Screw (HM3x10mm)x4 (Wing)
Screw (HA3x8mm)x4 (Vertical Stabilizer)
Screw (HA3x14mm)x5 (Nose 1,Engine 4)
Accessories Bag 3 x1
Screw (HM3x10mm)x4 (Wing Spare)
Screw (HA3x14mm)x5 (Nose 1,Engine 4 Spare)
Screw (HA3x8mm)x4 (Vertical Stabilizer Spare)
Screw (HA3x10mm)x4 (Tail nozzle Spare)
Accessories Bag 4 x1
Nylon rocker arm of the servo x2 (Spare)
Nylon antennax1
Nylon airspeed tubex1
Manualx1
REQUIRES:
6+ channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (MFC-2085)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (S-EDF)
LiPo battery charger
Landing gear
Servos
S-EDF 105mm 4270/750KV brushless motor
MFC-2085 Control System
All wire
ESC 160A/12S Hobbywing AS150
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$650.00
HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors PNP
SPECIFICATIONS:
Wingspan: 1245mm (49in)
Length: 1809mm (71.2in)
Flying Weight: 6.1kg (13.4 lb) w/ 12s
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 47 dm2
Wing load: 129.8 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature: 0-4?
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
Control System: MFC-2085
Servos
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360degree lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAhx 2,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /145.6x51.8x33.7(cm)
CG (Center of Gravity) 178mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=715mm diameter=10mm
White Stickerx1
Accessories Bag 1 x1
Nylon airspeed tubex1
Nylon antennax1
Pull rod(1.5×52mm)x1(Fit the chuck)
Nylon rudder anglex3
Nylon rudder angle gasketx3
Screw (PM3x10mm)x4 (Wing)
Screw (PA3x10mm)x4 (Vertical Stabilizer)
Screw (PA2x12mm)x3
Screw (PA3x15mm)x1 (Nose)
Long rocker armx1
Nylon chuckx2
Manualx1
REQUIRES:
6 channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
6Sx2 LiPo battery charger
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,299.90
HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors KIT
SPECIFICATIONS:
Wingspan:1245mm (49in)
Length:1809mm (71.2in)
Weight: 3.1kg (6.82 lb) (for reference only )
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless (required & not included)
Number of EDF Blade: 11 blades (required & not included)
Cruising speed: about 180 km/h (For reference only )
Flying time: about 3-5 mins (For reference only )
Wing area: 47 dm2
Wing load: 129.8 g/dm2 (For reference only )
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150 (required & not included)
Control System: MFC-2085 (required & not included)
Servos: (required & not included)
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360 lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: No
LED lights system: No
Electromagnetic brake system: No
Reinforced gyro selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/145.6x51.8x33.7(cm)
CG (Center of Gravity): 178mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=320mm diameter=10mmx2
White Stickerx1
Accessories Bag 1 x1
Horizontal steel wire rod(3x88mm)x2 (Horizontal Stabilizer)
Aileron steel wire rod(1.8x88mm)x2 (Aileron)
Wing lampshadex2
Fuselage lampshadex6
Vertical Stabilizer lampshadex2
Nylon cable tiesx5
Screw (PWA2x8mm)x8 (Control box)
Steering steel wire(1.5x35mm)x1 (Nose landing gear)
Wire rod steel wire(1.8x60mm)x1 (Vertical Stabilizer)
Wire rod steel wire(1.7x65mm)x1 (Nose wheel locking servo)
Wire rod steel wire(1.7x65mm)x1 (Left wheel locking servo)
Wire rod steel wire(1.2x41mm)x2 (Main wheel Cover)
Wire rod steel wire(1.2x41mm)x1 (Nose wheel Cover)
Screw (PM2.5x6mm)x1 (Main wheel Cover)
Screw (PM2.5x10mm)x1 (Main wheel Cover)
Wire rod steel wire(1.7x80mm)x1 (Right wheel locking servo)
Screw (PM3x12mm)x4 (Horizontal Stabilizer rod fixation with self-locking nut)
Screw (PM2x10mm)x6 (Wing/vertical Stabilizer rod fixation with self-locking nut)
Accessories Bag 2 x1
Screw (HM3x6mm)x2 (Horizontal Stabilizer)
Screw (HA3x10mm)x4 (Tail nozzle)
Screw (HM3x10mm)x4 (Wing)
Screw (HA3x8mm)x4 (Vertical Stabilizer)
Screw (HA3x14mm)x5 (Nose 1,Engine 4)
Accessories Bag 3 x1
Screw (HM3x10mm)x4 (Wing Spare)
Screw (HA3x14mm)x5 (Nose 1,Engine 4 Spare)
Screw (HA3x8mm)x4 (Vertical Stabilizer Spare)
Screw (HA3x10mm)x4 (Tail nozzle Spare)
Accessories Bag 4 x1
Nylon rocker arm of the servo x2 (Spare)
Nylon antennax1
Nylon airspeed tubex1
Manualx1
REQUIRES:
6+ channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (MFC-2085)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (S-EDF)
LiPo battery charger
Landing gear
Servos
S-EDF 105mm 4270/750KV brushless motor
MFC-2085 Control System
All wire
ESC 160A/12S Hobbywing AS150
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$650.00
HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors PNP
SPECIFICATIONS:
Wingspan: 1245mm (49in)
Length: 1809mm (71.2in)
Flying Weight: 6.1kg (13.4 lb) w/ 12s
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 47 dm2
Wing load: 129.8 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature: 0-4?
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
Control System: MFC-2085
Servos
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360degree lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAhx 2,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /145.6x51.8x33.7(cm)
CG (Center of Gravity) 178mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=715mm diameter=10mm
White Stickerx1
Accessories Bag 1 x1
Nylon airspeed tubex1
Nylon antennax1
Pull rod(1.5×52mm)x1(Fit the chuck)
Nylon rudder anglex3
Nylon rudder angle gasketx3
Screw (PM3x10mm)x4 (Wing)
Screw (PA3x10mm)x4 (Vertical Stabilizer)
Screw (PA2x12mm)x3
Screw (PA3x15mm)x1 (Nose)
Long rocker armx1
Nylon chuckx2
Manualx1
REQUIRES:
6 channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
6Sx2 LiPo battery charger
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,299.90
HSDJETS S-EDF90mm HBY-747 KLM Colors KIT
SPECIFICATIONS:
Wingspan 2800 mm (110.24 in)
Length 3000 mm (118.11 in)
Flying Weight ---
Flying time ---
Wing area 103.6 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ---
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
Control System MFC-2085 (required & not included)
Motor 3560-1550KV(Outer rotor)x4 pcs (required & not included)
EDF S-EDF 90mm 12 Bladex4 pcs (required & not included)
ESC 100Ax4 pcs (required & not included)
Servos (required & not included)
25gx4 Metal gear with 230mm lead (left & right ailerons forward)
25gx2 Metal gear with 80mm lead (left & right flap forward)
25gx1 Metal gear with 360mm lead (Vertical tail forward)
25gx2 Metal gear with 360mm lead (Elevator forward)
7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery 6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Not included
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging1 / Size Packing Box + Outer Box (Card mark)/1310x625x400(mm)
Packaging2 / Size Packing Box + Outer Box (Card mark)/1190x993x330(mm)
Packaging3 / Size Packing Box + Outer Box (Card mark)/705x405x643(mm)
CG (Center of Gravity) 470-475mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx5
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Nosex1 pcs
Mid fuselagex1 pcs
Fuselage tail endx1 pcs
Mid wingx1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Vertical tailx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Inboard engine setx2 pcs (w/o engine set)
Outboard engine setx2 pcs(w/o engine set)
Head pin carbon tube L=380mm external diameter 16mmx2 pcs
Body latch carbon tube L=680mm external diameter 16mmx2 pcs
Wing pin carbon tube 1 L=1380mm external diameter 16mmx2 pcs
Wing pin carbon tube 2 L=670mm external diameter 10mmx2 pcs
Horizontal pin carbon tube L=270mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x14mm)x8 pcs (Main wing?
Screw (HM3x35mm)x20 pcs (Engine set?
Screw (HM4x35mm)x2 pcs (Vertical tail?
Screw (HM4x50mm)x2 pcs (Vertical tail?
Screw (HM6x95mm)x14 pcs (Nose, fuselage, wing?
Screw (HM6x125mm)x4 pcs (Wing?
Screw (HM6x130mm)x4 pcs (Wing?
HBY-747 Manualx1 pcs
MFC-2085 Manualx1 pcs
REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Control System:MFC-2085
Motor:3560-1550KV(Outer rotor)x4 pcs
EDF: S-EDF 90mm 12 Bladex4 pcs
ESC:100Ax4 pcs
Servos:25gx4 Metal gear with 230mm lead (left & right ailerons forward)/25gx2 Metal gear with 80mm lead (left & right flap forward)/25gx1 Metal gear with 360mm lead (Vertical tail forward)/25gx2 Metal gear with 360mm lead (Elevator forward)/7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)/7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)/7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)
LED lights system
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$2,399.90
HSDJETS S-EDF90mm HBY-747 KLM Colors PNP
SPECIFICATIONS:
Wingspan 2800 mm (110.24 in)
Length 3000 mm (118.11 in)
Flying Weight 17kg (37.5 lb)
Flying time About 4-6 mins
Wing area 103.6 dm2
Wing load 164 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty 30 mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
Control System MFC-2085
Motor 3560-1550KV(Outer rotor)x4 pcs
EDF S-EDF 90mm 12 Bladex4 pcs
ESC 100Ax4 pcs
Servos
25gx4 Metal gear with 230mm lead (left & right ailerons forward)
25gx2 Metal gear with 80mm lead (left & right flap forward)
25gx1 Metal gear with 360mm lead (Vertical tail forward)
25gx2 Metal gear with 360mm lead (Elevator forward)
7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery 6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging1 / Size Packing Box + Outer Box (Card mark)/1310x625x400(mm)
Packaging2 / Size Packing Box + Outer Box (Card mark)/1190x993x330(mm)
Packaging3 / Size Packing Box + Outer Box (Card mark)/705x405x643(mm)
CG (Center of Gravity) 470-475mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx5
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Nosex1 pcs
Mid fuselagex1 pcs
Fuselage tail endx1 pcs
Mid wingx1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Vertical tailx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Inboard engine setx2 pcs (w/o engine set)
Outboard engine setx2 pcs(w/o engine set)
Head pin carbon tube L=380mm external diameter 16mmx2 pcs
Body latch carbon tube L=680mm external diameter 16mmx2 pcs
Wing pin carbon tube 1 L=1380mm external diameter 16mmx2 pcs
Wing pin carbon tube 2 L=670mm external diameter 10mmx2 pcs
Horizontal pin carbon tube L=270mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x14mm)x8 pcs (Main wing?
Screw (HM3x35mm)x20 pcs (Engine set?
Screw (HM4x35mm)x2 pcs (Vertical tail?
Screw (HM4x50mm)x2 pcs (Vertical tail?
Screw (HM6x95mm)x14 pcs (Nose, fuselage, wing?
Screw (HM6x125mm)x4 pcs (Wing?
Screw (HM6x130mm)x4 pcs (Wing?
Accessories Bag 2 x1 pcs
100mm Signal Line (JR male + JR male) x8pcs
100mm High Precision Y-Line (JR Male + JR Male) x1pcs
HBY-747 Manualx1 pcs
MFC-2085 Manualx1 pcs
REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$4,299.90
HSDJETS S-EDF 120mm HF-86 Yellow ribbon Colors KIT
SPECIFICATIONS:
Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight ------
Flying time ------
Wing area 64.34 dm2
Wing load ------
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085 (required & not included)
Motor 5268-KV640(Inner rotor) (required & not included)
EDF S-EDF 120mm-10 blade (required & not included)
ESC Hobbywing 160A brushless (required & not included)
Servos (required & not included)
25gx2 Metal gear with 560mm lead (Left & Right ailerons forward)
25gx2 Metal gear with 410mm lead (Left & Right flap forward)
25gx3 Metal gear with 190mm lead (Left & Right Elevator / Vertical tail forward)
25gx1 Metal gear with 230mm lead (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 380mm lead with protection function (Nose wheel steering / Rear wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward)
Recommended Power Battery 6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system No (required & not included)
Electromagnetic brake system No (required & not included)
Retarder plate Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Pearl cotton 3D Inner box + Outer Box /1320x550x440(mm)
CG (Center of Gravity) 300-305mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
Left Auxiliary oil tankx1 pcs
Right Auxiliary oil tankx1 pcs
Horizontal tailx1 pcs
Main wing bolt rod 1 L=720mm external diameter 20mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA4x45mm)x4 pcs (Horizontal tail)
Screw (HM4x20mm)x4 pcs (Main wing)
Screw (HM4x16mm)x4 pcs (Main wing)
Screw (HA3x10mm)x16 pcs (Vertical tail)
Screw (HM4x60mm)x4 pcs (Nose + Fuselage)
Screw (HM4x70mm)x8 pcs (Auxiliary oil tank)
Accessories Bag 2 x1 pcs
100mm signal line (JR male + JR male)x8 pcs
Head fixed plastic partsx4 pcs
3mm L-type hexagon wrenchx1 pcs
4mm L-type hexagon wrenchx1 pcs
Wing antenna x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs
REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$599.90
HSDJETS S-EDF 105mm Super Viper Navy Colors KIT
SPECIFICATIONS:
Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight ---
S-EDF/Motor S-EDF 105mm 4258/700KV brushless (required & not included)
Number of EDF Blade 11 blades (required & not included)
Cruising speed ---
Flying time ---
Wing area 34.28 dm2
Wing load ---
Main material 35 times EPO
Painting surface matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
ESC 160A/12S Hobbywing AS150 (required & not included)
UBEC 6A (2P Du-Pont and JR connector) (required & not included)
Control System Integrated Mix-Control system (required & not included)
Servos (required & not included)
25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Recommended Receiver Battery 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included)
Recommended Power Battery 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system Yes (required & not included)
LED lights system Yes (required & not included)
Electromagnetic brake system Yes (required & not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing aluminum tube L=598mm external diameter 16mmx1
Horizontal Stabilizer tube L=500mm external diameter 6mmx1
Stickerx1
Accessories Bag 1 x1
Screw (PWM4x35mm)x4 (Nose)
Screw (PM3x14mm)x2 (Wing)
Screw (PM3x10mm)x2 (Wing)
Screw (PA2x12mm)x4
Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer)
Manualx1
REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included)
2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included)
LiPo battery charger (required & not included)
S-EDF 105mm 4258/700KV brushless (required & not included)
11 blades (required & not included)
ESC:160A/12S Hobbywing AS150 (required & not included)
UBEC:6A (2P Du-Pont and JR connector) (required & not included)
Integrated Mix-Control system (required & not included)
Servo (required & not included):25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Landing gear: Metal electric retractable hydraulic landing gearx3 (required & not included)
General landing gear control system (required & not included)
LED lights system (required & not included)
Electromagnetic brake system (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$469.90
HSDJETS S-EDF 105mm Super Viper Red Colors KIT
SPECIFICATIONS:
Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight ---
S-EDF/Motor S-EDF 105mm 4258/700KV brushless (required & not included)
Number of EDF Blade 11 blades (required & not included)
Cruising speed ---
Flying time ---
Wing area 34.28 dm2
Wing load ---
Main material 35 times EPO
Painting surface matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
ESC 160A/12S Hobbywing AS150 (required & not included)
UBEC 6A (2P Du-Pont and JR connector) (required & not included)
Control System Integrated Mix-Control system (required & not included)
Servos (required & not included)
25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Recommended Receiver Battery 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included)
Recommended Power Battery 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system Yes (required & not included)
LED lights system Yes (required & not included)
Electromagnetic brake system Yes (required & not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing aluminum tube L=598mm external diameter 16mmx1
Horizontal Stabilizer tube L=500mm external diameter 6mmx1
Stickerx1
Accessories Bag 1 x1
Screw (PWM4x35mm)x4 (Nose)
Screw (PM3x14mm)x2 (Wing)
Screw (PM3x10mm)x2 (Wing)
Screw (PA2x12mm)x4
Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer)
Manualx1
REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included)
2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included)
LiPo battery charger (required & not included)
S-EDF 105mm 4258/700KV brushless (required & not included)
11 blades (required & not included)
ESC:160A/12S Hobbywing AS150 (required & not included)
UBEC:6A (2P Du-Pont and JR connector) (required & not included)
Integrated Mix-Control system (required & not included)
Servo (required & not included):25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Landing gear: Metal electric retractable hydraulic landing gearx3 (required & not included)
General landing gear control system (required & not included)
LED lights system (required & not included)
Electromagnetic brake system (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$469.90
HSDJETS S-EDF 105mm Super Viper Red Colors PNP 12S
SPECIFICATIONS: Wingspan: 1500mm (59.1in) Length: 1663mm (65.5in) Flying Weight: 5kg (11 lb) with 12S Battery S-EDF/Motor: S-EDF 105mm 4258/700KV brushless Number of EDF Blade: 11 blades Cruising speed: about 180 km/h Flying time: about 3-5 mins Wing area: 34.28 dm2 Wing load: 145.9 g/dm2 Main material: 35 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) ESC: 160A/12S Hobbywing AS150 UBEC: 6A (2P Du-Pont and JR connector) Control System Integrated Mix-Control system Servos 25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward) 25gx2 Metal gear with 480mm lead (Flap forward) 25gx2 Metal gear with 80mm lead (Elevator forward) 12gx1 Metal gear with 450mm lead (Nose wheel steering forward) 12gx1 Metal gear with 300mm lead (360 lock Hatch cover forward) Recommended Receiver Battery: 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included) Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included) Ailerons: Yes Flaps: Yes Elevator (Horizontal tail): Yes Rudder (Vertical tail): Yes General landing gear control system: Yes LED lights system: Yes Electromagnetic brake system: Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm) CG (Center of Gravity) 6.69in from the leading edge of the Main Wing Landing Gears: Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing aluminum tube L=598mm external diameter 16mmx1 Horizontal Stabilizer tube L=500mm external diameter 6mmx1 Stickerx1 Accessories Bag 1 x1 Screw (PWM4x35mm)x4 (Nose) Screw (PM3x14mm)x2 (Wing) Screw (PM3x10mm)x2 (Wing) Screw (PA2x12mm)x4 Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Manualx1 REQUIRES: 7 channel radio system (radio & receiver) (required & not included) 6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included) 2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$999.90
HSDJETS Double S-EDF90mm HME-262 Green Camo Colors PNP
SPECIFICATIONS:
Wingspan 1890 mm (74.4 in)
Length 1626 mm (64 in)
Flying Weight 7kg (15.4 lb)
Flying time About 5 mins
Wing area 52.3 dm2
Wing load 133.8 g/dm2
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal + Gloss oil
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0?-40?
Radio System 7 channel (required & not included)
Control System MFC-2085-DR
Motor 3560-1550KV(Outer rotor)x2 pcs
EDF S-EDF 90mm 12 Bladex2 pcs
ESC 100Ax2 pcs
Servos
25gx2 Metal gear with 480mm lead (left & right ailerons forward)
25gx2 Metal gear with 330mm lead (left & right outer flap forward)
25gx1 Metal gear with 230mm lead (Vertical tail forward)
25gx4 Metal gear with 80mm lead (Elevatorx2 & L/R inner flap forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Nose wheel steering forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery 6S,22.2V,5000-6000mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/1400x525x335(mm)
CG (Center of Gravity) 145-150mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Vertical tailx1 pcs
Left power groupx1 pcs
Right power groupx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Main wing bolt rod L=670mm external diameter 16mmx1 pcs
Horizontal Stabilizer bolt rod L=500mm external diameter 6mmx1 pcs
Accessories Bag 1x1 pcs
Screw (HA3x10mm)x16 pcs (S-EDF)
Screw (HM3x10mm)x20 pcs
Accessories Bag 2x1 pcs
100mm signal line (JR male+JR male)x8 pcs
100mm High precision Y-line (JR male+JR male)x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs
REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000,45Cx2,LiPo with XT90 type plug (required & not included)
2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,249.90SPECIFICATIONS: Wingspan:1245mm (...
SPECIFICATIONS: Wingspan: 1245mm ...
SPECIFICATIONS: Wingspan:1245mm (...
SPECIFICATIONS: Wingspan: 1245mm ...
SPECIFICATIONS: Wingspan 2800 mm (110.2...
SPECIFICATIONS: Wingspan 2800 mm (110.2...
SPECIFICATIONS: Wingspan 1720 mm (67.7 ...
SPECIFICATIONS: Wingspan 1500mm (59.1in...
SPECIFICATIONS: Wingspan 1500mm (59.1in...
SPECIFICATIONS: Wingspan: 1500mm (59.1i...
SPECIFICATIONS: Wingspan 1890 mm ...
Bestsellers
Manufacturers
Specials [more]
BVM F-16 1:5 Nose Cone *BLEMISHED*
Save: 76% off
"Dry Lube" 2 for $10.00
Save: 9% off
