We have flown it extensively in every BVM factory demo jet and have tried every possible maneuver and unusual attitude combined with every possible throttle position - you just can't make it quit! All BVM fuel cell packages (for BVM jets) now come standard with a U.A.T. The mystery material, duck bill shaped sack inside will deliver a solid stream of fuel (no bubbles) to the fuel pump even if the 4oz bottle should get 3/4th's full of air, which is very unlikely. This is a very high quality product for those turbine pilots who want to eliminate the possibility of an air bubble causing a flame out. The U.A.T. is placed in series between the last fuel tank and the fuel pump. The system is filled through the 3rd line in the U.A.T. The rectangular shaped tank can be mounted vertically or horizontally and produce the same results making it convenient to fit into just about any model and it will work with any model size turbine engine.
$74.95Designed to be used with turbine powered models, this product from BVM protects from spilling fuel on the ground during the filling procedure and also to supply extra fuel for start-up.
The two large Buna O-Rings keep the tank from slipping off of your wing and protects from scratching its shiny surface.
These are very popular items at jet events so you may want to personalize yours for easy identification.
$37.95Classic Bandit Kevlar Fuel Cells (2.4 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00Super Bandit Kevlar Fuel Cells (3.7 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00F-4 Fuel Cells (4.1 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$352.00Bobcat XL Kevlar Fuel Cells (2.0 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$375.00Rafale B-01 - Twin Engine with (2) U.A.T.'s (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$500.00Rafale B-01 - Single Engine (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$485.00F-100 Fuel Cells (4.8 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$450.00F-80/T-33 Kevlar Fuel Cells (2.7 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$352.00F86 80 Fuel Cells (4.3 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$450.00Bobcat Composite Canopy Deck Package (includes canopy) THIS PACKAGE INCLUDES THE CLEAR CANOPY.
$93.50When flying off wet grass or a puddled runway, the nose wheel can spray water up into the wheel well. Since there are electrical components in that area of the fuselage, there is a chance that they could be affected. This plastic cover box can be installed to prevent a problem from occurring.
$34.50This 3D printed Pitot Tube Mount can be used with a JetCat (or similar) Air Speed Sensors. Mount the airfoiled end to the fuselage such that the Pitot Tube is pointed to the front end of the model and close to parallel to the longitudinal axis. For accuracy, it is necessary that the Pitot Tube is at least 1/2" away from fuselage skin to not be affected by boundary layer flow. The plywood plate and screws allow attaching it to the fuselage skin. The fairing can be primed and painted to suit your needs.
$31.95KingCat Pylons (pair) complete with EZ-DROP's, air install and hardware
$159.99Fighter Bombers of this era had underwing pylons to carry extra fuel to get them to the combat zone and engage in air-to-air or air-to-ground attacks. These highly detailed epoxy glass molded options allow you to fully adorn the Sabre Jet. This package requires assembly and paint.Â
$325.00BVM has been using this Aerospace grade glue for about a year to glue sub assemblies on our Ultra Bandit and F-100's.
We are offering it for the general market by popular demand from our Ultra and F-100 customers that like what they received.
It requires a 2:1 plunger if you already have an Aeropoxy dispenser gun.
The Aeropoxy glue kit contains an applicator gun, 4 short mix nozzles, 2 long mix nozzles and 2 glue cartridges. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$87.95The ever increasing aerodynamic stresses we expect our models to endure calls for an Aerospace Grade adhesive product, and Aeropoxy is it. Aeropoxy is a thixotropic, slow cure, Aerospace Grade, 2 part epoxy system. It is the strongest and best gripping adhesive for all types of composite material bonding to other materials such as wood, plastic, and aluminum. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% Faster As good as Aeropoxy but cures in 1/2 the time. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% Faster As good as Aeropoxy but cures in 1/2 the time. Vpoxy+ Kit includes: 2 Vpoxy+ Glue Cartridges, Dispensing Gun, 2:1 Plunger, 2 Long Glue Mix Nozzles, 4 Short Glue Mix Nozzles Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$87.95Re-Formulated - QT Plus produces a bond that is almost as strong as BVM's Aeropoxy, but allows for quick assembly and field repairs. Set time is 4 - 5 minutes. Sometimes, it may be convenient to not use the mix nozzle. Just squeeze out a small amount of glue and blend the two streams of glue with a mix stick. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95BVM 2020 T-Shirt White - Small
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM Oxford LongSleeve - Small size with BVM Jets embordery
Teflon™ tough, this stylish shirt is made from a 65% polyester/35% cotton blend and is treated with Teflon™ fabric protector for stain resistance. It features a soft-touch finish, wrinkle resistance, a button-down collar, a double-back yoke, two side back pleats, a patch pocket with pencil compartment and bone-horn buttons.
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$35.00Hanes F260 Ultimate Cotton ® - Crewneck Sweatshirt
85% cotton, 15% poly
Low pill, high-stitch density PrintPro® XP fabric with 100% cotton face
Double-needle cover seamed neck, armholes and waistband
Cotton/polyester/spandex neck, cuffs and relaxed waistband for ultimate comfort
Size Chart
Small – 21 Body Width, 28 Full Body Length, 24 Sleeve Length
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$35.00BVM T-Shirt Blue - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM T-Shirt Heather Grey - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM T-Shirt Pink - SMALL
Gildan 100% Cotton
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM T-Shirt Tan - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$29.95Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$34.95Please specify the Length and Exit Diameter when you check out.Â
F-86 (60") Tailpipe
F-16/ early Viper/ early Agg Tailpipe
Maverick PRO/Ultra Viper/Agg III Tailpipe
T-33 Tailpipe
Electra Tailpipe - 31.375" length 3.5" exit diameter Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
F-80 Electric Tailpipe
F-4 Electric Tailpipe
Classic Bandit Electric Tailpipe Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Maverick Tailpipe
Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
EVF Shroud and Mounting Hardware We are making the EVF shroud and mounting hardware available for BVM kit builders. This setup will facilitate the placement of inlets and tailpipes in your electric jet model. Simply use the shroud while building, then pop in your EVF when your model is complete and ready for power. There is a $75.00 charge for the shroud, you may return it to BVM for a $50.00 refund. This is a service offered only by BVM.
$75.00