English
Categories
- PNP/Go Fly Accessories
- Kit Accessories
- HSD Jets
- PowerBox
- Carbon Fiber
- Air Systems
- Accessories
- Installation Organizers
- Building Materials
- Finishing Materials
- Adhesives
- Electric VioFan (EVF)
- Chargers / Power Supplies
- Electric Accessories
- Batteries
- Turbine Mounts & Straps
- Turbine Accessories
- Fuel Cells
- Fuel System Accessories
- Jersey Modeler
- Cockpits
- Lubricants
- PermaGrit
- Tools
- Radio Gear
- Pilots
- Landing Gear
- Wheels Tires and Brakes
- Jet Cases / Cradles
- Specials
- Apparel and Gifts
- Books
- Gift Certificates
- Penn Bags
BVM Series Power Plug 3
BVM Series Power Plug 3 used with 12S or 14S 3 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$38.99
BVM Series Power Plug 2
BVM Series Power Plug 2 used with 10S 2 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$33.99
EVF 3 10s 9er
EVF ~3~ 10S power unit has been test flown in both the BVM Electra and Sabre Jet with excellent results. It delivers 16Lb of thrust (test cell) at 107 amps and runs very very cool. In-Flight motor temps registered a maximum of 136°F after the most demanding vertical climbs. The Castle Creation's Edge Lite HV160 is housed and kept cool in the EVF's epoxy fiberglass and Kevlar aft fairing for an all up weight of 2Lbs. 3oz. Utilizing ThunderPower 70C 6600 mAh LiPo's (10 cells) we are getting 6+ minute flights without stressing the batteries, i.e. using less than 80% of the capacity.
$1,595.00
EVF 3 12S 9er
EVF 9 Blade 12S Fan Unit. An additional 3 Lbs. of thrust is available with the EVF ~3~ 12s system. A larger motor and 2 extra LiPo cells gives us a fan system that will drive a 19-24 Lb. model with convincing jet-like performance. A properly built model in the 19-21 Lb. range that is equipped with landing gear doors (as all BVM jets are) can easily yield 7-8 minutes of flight time on ThunderPower 7700mAh LiPo's.
$1,595.00
Electra Kit Structure Enhancement
About 3 hours of modeling time and some Aeropoxy are required to make the upgrade. As with any high performance model, it is wise to occasionally disassemble it and check the critical glue joints.
$35.00
NACA Inlets For summer operation.
NACA Inlets For summer operation. Adding these NACA flush cooling air inlets to an EVF powered jet will reduce the end-of-the-flight temperatures (motor/batteries) by 8-10°F compared to a non ventilated installation. The inlet design allows the cooling air to enter the fuselage with very little drag losses. The inlets can be added to a finished model.
$18.95
Electra "T" and ARF Fuels Cells
Electra "T" and ARF Fuels Cells (1.75 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$255.00
Electra ARF Structure Enhancement
About 3 hours of modeling time and some Aeropoxy are required to make the upgrade. As with any high performance model, it is wise to occasionally disassemble it and check the critical glue joints.
$35.00
F-86 Super Flow Inlet Duct
Super Flow Inlet Duct for BVM F-86 63" ARF. In our efforts to constantly improve the efficiency of the BVM EVF powered airframes, we took a close look at the F-86 inlet duct. We found that with some contour changes and the inclusion of a center mounted spike we could gain some performance. The airflow from the nose cone inlet to the fan rotor is now much improved. This is all new tooling and both the static and flight tests confirm the performance increase. It's an easy to install, worthwhile upgrade to an EVF powered F-86. Installing this duct assembly in any existing BVM Sabre designed for EVF or D/F power will yield an additional 1 pound of static thrust. The weight addition is .6 oz.
INCLUDES:
Mylar Thrust Tube, FWD Battery Shelf, Inlet Assembly, Carbon Cord, and hardware
HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors KIT
SPECIFICATIONS:
Wingspan:1245mm (49in)
Length:1809mm (71.2in)
Weight: 3.1kg (6.82 lb) (for reference only )
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless (required & not included)
Number of EDF Blade: 11 blades (required & not included)
Cruising speed: about 180 km/h (For reference only )
Flying time: about 3-5 mins (For reference only )
Wing area: 47 dm2
Wing load: 129.8 g/dm2 (For reference only )
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150 (required & not included)
Control System: MFC-2085 (required & not included)
Servos: (required & not included)
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360 lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: No
LED lights system: No
Electromagnetic brake system: No
Reinforced gyro selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/145.6x51.8x33.7(cm)
CG (Center of Gravity): 178mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=320mm diameter=10mmx2
White Stickerx1
Accessories Bag 1 x1
Horizontal steel wire rod(3x88mm)x2 (Horizontal Stabilizer)
Aileron steel wire rod(1.8x88mm)x2 (Aileron)
Wing lampshadex2
Fuselage lampshadex6
Vertical Stabilizer lampshadex2
Nylon cable tiesx5
Screw (PWA2x8mm)x8 (Control box)
Steering steel wire(1.5x35mm)x1 (Nose landing gear)
Wire rod steel wire(1.8x60mm)x1 (Vertical Stabilizer)
Wire rod steel wire(1.7x65mm)x1 (Nose wheel locking servo)
Wire rod steel wire(1.7x65mm)x1 (Left wheel locking servo)
Wire rod steel wire(1.2x41mm)x2 (Main wheel Cover)
Wire rod steel wire(1.2x41mm)x1 (Nose wheel Cover)
Screw (PM2.5x6mm)x1 (Main wheel Cover)
Screw (PM2.5x10mm)x1 (Main wheel Cover)
Wire rod steel wire(1.7x80mm)x1 (Right wheel locking servo)
Screw (PM3x12mm)x4 (Horizontal Stabilizer rod fixation with self-locking nut)
Screw (PM2x10mm)x6 (Wing/vertical Stabilizer rod fixation with self-locking nut)
Accessories Bag 2 x1
Screw (HM3x6mm)x2 (Horizontal Stabilizer)
Screw (HA3x10mm)x4 (Tail nozzle)
Screw (HM3x10mm)x4 (Wing)
Screw (HA3x8mm)x4 (Vertical Stabilizer)
Screw (HA3x14mm)x5 (Nose 1,Engine 4)
Accessories Bag 3 x1
Screw (HM3x10mm)x4 (Wing Spare)
Screw (HA3x14mm)x5 (Nose 1,Engine 4 Spare)
Screw (HA3x8mm)x4 (Vertical Stabilizer Spare)
Screw (HA3x10mm)x4 (Tail nozzle Spare)
Accessories Bag 4 x1
Nylon rocker arm of the servo x2 (Spare)
Nylon antennax1
Nylon airspeed tubex1
Manualx1
REQUIRES:
6+ channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (MFC-2085)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (S-EDF)
LiPo battery charger
Landing gear
Servos
S-EDF 105mm 4270/750KV brushless motor
MFC-2085 Control System
All wire
ESC 160A/12S Hobbywing AS150
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,249.90
HSDJETS HF-16 Foam Turbine Black Camo Colors PNP V2.0
SPECIFICATIONS:
Wingspan: 1344mm (52.9in)
Length: 1809mm (71.2in)
Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene)
Turbine Engine: 6-8KG brushless (required & not included)
Cruising speed: 150-200 km/h
Flying time: 3-5 mins
Wing area: 47.6 dm2
Wing load: 178.6 g/dm2
Main material: 20 times the import of aeromodelling EPO
Painting surface: Matte environmental water-borne paint + decal
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40
Radio System: 6 channel (required & not included)
Control System: MFC-2085
Servos (All 7.4V High voltage)
40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward)
25gx2 Metal gear with 150mm lead (left & right Aileron forward)
25gx1 Metal gear with 230mm lead (Rudder forward)
12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward)
12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward)
12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward)
12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward)
Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm)
CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing
Landing Gears All-metal simulation electronic retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Nosex1
Cockpit canopyx1
Vertical Stabilizerx1
Left Horizontal tailx1
Right Horizontal tailx1
L/R Auxiliary tankx1
L/R wingtip missilex1
L/R wingtip missile pylonx1
L/R No.1 missilex1
L/R No.2 missilex1
L/R tail finsx1
Main wing carbon tube L=400mm external diameter 10mmx2
Accessories Bag x1
Fuselage antenna x1
Pitotx1
Screw (HA3x14mm)x10 (Nose & Engine)
Screw (HM3x6mm)x2 (Horizontal tail)
Screw (HA3x10mm)x8 (Tail nozzle & Vertical)
Screw (KA3x16mm)x8 (Missile)
Screw (KA3x20mm)x8 (Missile)
Screw (KM3x60mm)x8 (Auxiliary tank)
Screw (HM3x10mm)x8 (Main wing)
HF-16 V2 Manualx1
MFC-2085 Manualx1
REQUIRES:
SW 6-8KG brushless (required & not included)
6 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,529.90
HSDJETS T-33 Foam Turbine Yellow ribbon Colors PNP XT60 plug
SPECIFICATIONS:
Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085
Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs
REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,549.90
HSDJETS S-EDF 120mm HF-86 Sky Blazer Colors PNP
SPECIFICATIONS:
Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight 8 kg (15.4 lb) with 12S / 22.2V / 5200mAh / 45C Li-Pox2 PCS
Flying time 3-5 minutes
Wing area 64.34 dm2
Wing load 124.3 g/dm2
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085
Motor 5268-KV640(Inner rotor)
EDF S-EDF 120mm-10 blade
ESC Hobbywing 160A brushless
Servos
25gx2 Metal gear with 560mm lead (Left & Right ailerons forward)
25gx2 Metal gear with 410mm lead (Left & Right flap forward)
25gx3 Metal gear with 190mm lead (Left & Right Elevator / Vertical tail forward)
25gx1 Metal gear with 230mm lead (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 380mm lead with protection function (Nose wheel steering / Rear wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward)
Recommended Power Battery 6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Retarder plate Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Pearl cotton 3D Inner box + Outer Box /1320x550x440(mm)
CG (Center of Gravity) 300-305mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
Left Auxiliary oil tankx1 pcs
Right Auxiliary oil tankx1 pcs
Horizontal tail x1 pcs
Main wing bolt rod 1 L=720mm external diameter 20mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA4x45mm)x4 pcs (Horizontal tail)
Screw (HM4x20mm)x4 pcs (Main wing)
Screw (HM4x16mm)x4 pcs (Main wing)
Screw (HA3x10mm)x16 pcs (Vertical tail)
Screw (HM4x60mm)x4 pcs (Nose + Fuselage)
Screw (HM4x70mm)x8 pcs (Auxiliary oil tank)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Head fixed plastic partsx4 pcs
3mm L-type hexagon wrenchx1 pcs
4mm L-type hexagon wrenchx1 pcs
Wing antenna x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs
REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,399.90
HSDJETS HJ-10 Turbine CAF NEW (DARK BLUE) PNP with Vectoring
SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG-12KG (required & not included)
Cruising speed 160-180 km/h
Flying time 4-6 mins (full throttle)
Wing area 64 dm2
Wing load 164.1 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085
Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Vectoring nozzle Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60x21.3x14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,699.90
HSDJETS HJ-10 Foam Turbine Black Colors KIT
SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Weight ---
Turbine Engine 8KG-12KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 64 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Vectoring nozzle Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$899.90
My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,499.90
My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors KIT
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
My Hobby HT-45 by HSDJETS Foam Turbine Blue Navy Colors KIT
**Does Include Correct Tail Marking Decals**
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
F-18 1:7.75 Missile Rails - WHITE
F-18 7.75 Missile Rails painted WHITE Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$57.50
F-18 1:7.75 Missile Rails - Grey
F-18 1:7.75 PNP Missile Rails - Pair
Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$57.50
