6MM PNP WHEEL BUSHING
5MM PNP Wheel Bushing
BobCat Jet-Foam Cradle Insert
JR Transmitter Battery Upgrade Includes E-Z solder tabs for connecting + and - wires. BVM has been flying Sanyo eneloop cells for several months now with excellent results. Now, you can fly a whole weekend on one charge! These batteries have no memory effect and feature an extremely flat discharge curve providing consistent power longer than other cells. To install, simply remove 4 screws and a tape seal from the battery case, and resolder (2) tabs to the + and - terminals. As always, read the charging instructions that accompany the eneloop batteries.
$56.00Fuel Line Spring Clips - 8MM 10 per package For: Hi-Flow Fuel Systems The 8mm clips can be used on most fittings except those inside the fuel tanks. Safety wire (BVM #2800) is used to secure the flexible tubing to those fittings. Be cautious with the pliers to not pinch the clips more than necessary. Pull test the fuel lines to check for security after the clips are in place.
$7.95G-10 (Epoxy F/G Plate Stock) - 3 per pack BVM developed the Hi-Flow Fuel System to benefit performance and reliability of model jet engines in the 180N (40# of thrust) class and larger. As stated on the BVM Hi-Flow web-page link, everything that the fuel passes through from the clunk to the engine fuel pump has been enlarged for higher volume, lower resistance, fuel flow.
$11.95Hi Flow Aluminum Cap Fittings Here is a fuel tank cap system that will not flex and deteriorate with time. The machined aluminum cap and threaded disc capture the standard rubber stopper and squeeze it securely with a 4-40 socket head machine screw. Results are a leak proof cap, even when pressure is applied to the fuel system. The 3/16 diameter soft brass tubing allows freer flow of the fuel as required by some of today's larger engines. BVM uses this system on their ducted fan installations as well as for turbine fuel systems. Other specialty enthusiasts will surely want this fuel system improvement as well. Each cap system contains one rubber stopper for use with glow fuel and one compatible with petroleum liquids, adaptable to Sullivan or Du-bro tanks.
$25.95Hi-Flow UAT with line reducer, 8mm tubing, 6mm tubing, fill plug
We have flown it extensively in every BVM factory demo jet and have tried every possible maneuver and unusual attitude combined with every possible throttle position - you just can't make it quit! All BVM fuel cell packages (for BVM jets) now come standard with a U.A.T. The mystery material, duck bill shaped sack inside will deliver a solid stream of fuel (no bubbles) to the fuel pump even if the 4oz bottle should get 3/4th's full of air, which is very unlikely. This is a very high quality product for those turbine pilots who want to eliminate the possibility of an air bubble causing a flame out. The U.A.T. is placed in series between the last fuel tank and the fuel pump. The system is filled through the 3rd line in the U.A.T. The rectangular shaped tank can be mounted vertically or horizontally and produce the same results making it convenient to fit into just about any model and it will work with any model size turbine engine.
$84.95Aluminum Cap Fittings fits Sullivan and Dubro tanks. Here is a fuel tank cap system that will not flex and deteriorate with time. The machined aluminum cap and threaded disc capture the standard rubber stopper and squeeze it securely with a 4-40 socket head machine screw. Results are a leak proof cap, even when pressure is applied to the fuel system. The 5/32 diameter soft brass tubing allows freer flow of the fuel as required by some of today's larger engines. BVM uses this system on their ducted fan installations as well as for turbine fuel systems. Other specialty enthusiasts will surely want this fuel system improvement as well. Each cap system contains one rubber stopper for use with glow fuel and one compatible with petroleum liquids, adaptable to Sullivan or Du-bro tanks.
$17.95Engine Strap Screw Clamp 75-80MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 100-105MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 95-100MM BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 80-85MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 105-110MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 110-115MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 90-95MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Engine Strap Screw Clamp 85-90MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Bobcat Composite, Bobcat XL, and Classic Bandit Hopper Tank 16 oz w/ hardware - No U.A.T. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$125.00BVM's Large Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 4" and larger.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50BVM's Medium Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 3" to 3-1/2" tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50BVM's Small Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 2-1/8" to 2-5/8".
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50BVM Tool Organizer with Screw Tray helps you organize your messy workbench, perfectly arrange all the tools, get rid of the messy toolbox, and keep your tools neatly organized. Whether you're simply storing tools on this holder, using it as a convenient grab-and-go system, or want to keep your tools conveniently organized and in reach on the job, this holder has you covered. With all necessary hardware provided, simple and practical design makes it easy to assemble. ITEM SPECIFICATIONS: This CNC Aluminum Tool Organizer has up to 18 holes and will sit on any surface. The large holes will hold a wide variety of screwdriver sizes in place. If you have any questions about this product, please do not hesitate to contact us, our team is always here to provide you with service. **ASSEMBLY REQUIRED** **TOOLS NOT INCLUDED**
$23.99ENGRAVED Philips Wrench Set 4pcs Titanium Coated Tips
~FREE PERSONALIZED ENGRAVING ON THE TOOLS~
Take the guess work out of who's tool it is. 4 Piece Set Includes: PHILIPS 3.0mm X 180mm PHILIPS 4.0mm X 180mm PHILIPS 5.0mm X 180mm PHILIPS 6.0mm X 180mm
** Please note that the personalized custom engraved tools are made per order and the turn around time frame is about 4 - 6 weeks.
$24.99Philips Wrench Set 4pcs Titanium Coated Tips 4 Piece Set Includes: PHILIPS 3.0mm X 180mm PHILIPS 4.0mm X 180mm PHILIPS 5.0mm X 180mm PHILIPS 6.0mm X 180mm ** Please note this item is not personally engraved and will only have the BVM Logo and Tool Size.
$24.99ENGRAVED Allen Wrench Set Purple 4pcs Titanium Coated Tips
~FREE PERSONALIZED ENGRAVING ON THE TOOLS~
Take the guess work out of who's tool it is. 4 Piece Set Includes: HEX .050 X 180mm HEX .063 X 180mm HEX .078 X 180mm HEX .093 X 180mm
** Please note that the personalized custom engraved tools are made per order and the turn around time frame is about 4 - 6 weeks.
$24.99Allen Wrench Set Purple 4pcs Titanium Coated Tips 4 Piece Set Includes: HEX .050 X 180mm HEX .063 X 180mm HEX .078 X 180mm HEX .093 X 180mm ** Please note this item is not personally engraved and will only have the BVM Logo and Tool Size.
$24.99ENGRAVED Allen Wrench Set Purple 4pcs Titanium Coated Tips
~FREE PERSONALIZED ENGRAVING ON THE TOOLS~
Take the guess work out of who's tool it is. 4 Piece Set Includes: HEX 1.5 X 180mm HEX 2.0 X 180mm HEX 2.5 X 180mm HEX 3.0 X 180mm
** Please note that the personalized custom engraved tools are made per order and the turn around time frame is about 4 - 6 weeks.
$24.99Allen Wrench Set Purple 4pcs Titanium Coated Tips 4 Piece Set Includes: HEX 1.5 X 180mm HEX 2.0 X 180mm HEX 2.5 X 180mm HEX 3.0 X 180mm ** Please note this item is not personally engraved and will only have the BVM Logo and Tool Size.
$24.99