The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
2 - 16MM X 25MM Spring
2 - Nylon Spacer
Pin Hole Filler 6oz
Milled Fiber 4oz
To strengthen glue joints.
These 1/32" long fiberglass fibers will add strength to an epoxy glue joint. Milled fiber also thickens the glue mix so it will stay where you put it.
A combination of some milled fiber with microballoons and resin will also yield a stronger fillet material.
*BVM recommends removing pump battery BEFORE charging.
$259.00
*BVM recommends removing pump battery BEFORE charging.
$259.00BVM has a simple solution for filling pneumatic air tanks. Simply take this adaptor out of the package and attach to your air inflator and you are ready to go. You no longer need to fuss with safety wire or zip ties to hold the airline in place. The BVM Inflator Adaptor includes 6 inches of the BVM Heavy Duty Airline. *This adaptor is not designed to retain pressure* **This is NOT a BVM Air Fill Valve. To order a BVM Air Fill Valve use part number BVM5758**
$19.99BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 1 Purple and 1 Silver Plug
$5.99BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 2 Purple Plugs
$6.99BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 2 Silver Plugs
$4.99This Gyro Isolation Box is designed to help dampen harmonic sounds created by turbines that could cause the gyro to act up. Detailed assembly instructions are provided.
$15.99Electra ARF Main Gear Flex Plates for Robart Landing Gear
$29.95Fuel Fill Valve set is a "Twist-Locking" system to fuel your aircraft. The valve spring seals when not being filled. The fuel cap adds additional protection from dirt and debris. Complete set includes - 1 Fueler Check Valve, 1 Fuel Probe, and 1 Fuel Cap
$28.99Proportional Control - No Air Supply System Required The BVM E-Brake will operate all BVM "O" Ring Brakes. It provides complete proportional control and foes not require any storage tanks or associated valves, filler fittings, etc. It will fit into your model in the same space / volume as does a medium size air storage tank. This new Version 4 BVM E-Brake is a larger diameter cylinder. This provides more volume for braking power. Some assembly is required. NOTE: The E-Brake V4 kit does not include the Servo. BVM recommends the Savox 227 servo to operate the E-Brake V4.
$85.00The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
1 - 8MM X 20MM Spring
1 - 8MM X 20MM Spring
1 - Nylon Spacer
Multi Function 9-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$539.00Multi Function 7-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$419.00Multi Function 5-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$299.00Multi Function 3-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$179.00The CCU monitors, controls, and displays functions within your airframe. Control Features: High Voltage Compatible (8.4 Volts) Landing Gear Lights Brakes Landing Gear Failsafe, on the ground (in case LG Switch is backwards) Landing Gear Altitude Trigger Manual Gear Retracting Operation - No TX needed (depending on RX) Air Pressure Loss Failsafe Gear Door Sequencer - 3 Types System Voltage Display Large Air Pressure Display Automatic Light Controller Two Stage Brake Control Steering Servo Shutoff Command Centers Steering on Takeoff with Gear Up Command Anti Wheel Spin on Gear Up Command S-BUS compatible for Futaba users
$350.00BVM Clear Strut Damping Grease, 10cc USED IN BVM PNP STRUTS
$4.95Go Fly Gold Airline Clear 12 Feet
2MM OD, 1MM ID
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50Go Fly Gold Airline Black - 12 Feet
Go Fly Gold Airline Gray 12 Feet
2MM OD, 1MM ID
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50Go Fly Gold Airline Blue - 12 Feet
2MM OD, 1MM ID
NOTE: Thickness can/will vary. During the manufacturing process the tubing is extruded. It is common practice to stretch the tubing before use to easily work with collars and fittings.
$9.50Aluminum Air Disconnects 6/PK
Airline Disconnects will support 2MM or 3MM airline with included 3MM fittings.
$28.50Three-Way Air Fitting will support 2MM or 3MM airline with included fittings.
$10.99The 2mm airline system works well in the PNP jets. Applying the tubing to the small metal barbed fittings can be tedious and some breakage of the fittings has occurred.
Fuel Line Spring Clips - 6MM 10 per package For: Standard Fuel Systems The 6mm clips can be used on most fittings except those inside the fuel tanks. Safety wire (BVM #2800) is used to secure the flexible tubing to those fittings. The standard size clips will secure the 6mm fuel tubing to 5/32” brass tubes as shown. Be cautious with the pliers to not pinch the clips more than necessary. Pull test the fuel lines to check for security after the clips are in place.
$6.95Velcro Strap / Black 1-1/2 X 32 Hook on one side, Loop on the other; this heavy duty strapping can be used to hold heavy batteries in the model. It can also serve to hold the models in a van or on a trailer shelf.
$8.50Velcro Strap / Black 3/4 X 24; (2) Can be used to reinforce the adhesive product (above) to add a firm retaining strap to hold batteries etc.
$9.25Velcro Strap / Black 3/8 X 24; (2) It conveniently hand separates (without scissors) in 6 inch lengths. You will find many other uses for it when gearing-up your model.
$5.10Velcro / White adhesive back 2 X 6; (2) This Hook n' Loop product has a very aggressive adhesive backing and very aggressive Hook n' Loop gripping power. Cut to size with sharp scissors. Apply the prickly side to a smooth Zap or painted surface and the fuzzy side to a battery or receiver.
$7.50