Velcro / Black adhesive backed 3/4 X 36 Very convenient to mount EVF power batteries. Works similar to the white adhesive product #PA-SR-0083 but is sometimes more convenient to cut, peel, and stick.
$13.50For all of your
component installation requirements such as: batteries, receiver,
gyro safety strap,
fuel tanks, U.A.T., etc.
"All In One Package"
$49.95Originally developed for the BVM 84" Sabre Jet, this Jet-Foam Cradle works well for many medium size jets such as the Bandit, Electra, MiG-15, and F-100. The distance between the End Brackets can be adjusted on the PVC Tubes and the Velcro Straps will hold the model for field assembly, disassembly, and transport, as well as being very handy in the shop while you work on the model. Review the accompanying enclosures and the photos below to see the advantages a BVM Jet-Foam Cradle offers. Modify as desired A razor saw or sharp knife can be used to put a "V" notch in an End Bracket if that best suits your model. Outline the desired modification with tape, then cut. Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00This infinitely adjustable, 1-1/2" wide 12 ft length, strap wraps onto itself for a secure hold. Hook on one side, loop on the other in one convenient piece.
$24.95Use these Syringes to neatly apply Aeropoxy, Vpoxy, and QT Poxy into hard to reach places such as formers inside a fuselage. They are also handy for applying a fine bead around fuel tank fittings.
$4.95The BVM Pump Mount can be used to secure most standard turbine fuel pumps or smoke pumps. The plastic mounts are adhesive backed. Additional screws may be used to secure the mount to the surface. Two 8" zip ties are included. Two mounts per package.
$5.95Replacement Fork Tips with installation instructions. Clevis Pliers Replacement Tips available only to owners of the complete "Clevis Pliers" tool. Here's Why: BVM wants our products to be successful. There are instructions on how to use this precision tool that come with the complete Clevis Pliers package. The instructions are necessary for "success". Additionally, BVM makes an adjustment to the pliers to allow the Fork Tips to properly align.
$10.95Save your fingers! This new modeling tool makes rigging control systems easier, faster, less frustrating, and saves wear and tear on your fingers. Access into hard-to-reach areas are now much easier and you don't need a screw drivers that can slip and puncture the the adjacent surface.
For all #2-56 and #4-40 Metal Clevises
Replacement Fork Tips are available! Yes, if you accidently drop the pliers on a hard floor, the tips may break.
$32.95
Bandit ARF MKI & MKII & eBandit Main Gear Reinforcement Kits.
$32.50BVM Epoxy Starter Kit includes: Glue Gun, Aeropoxy Cartridge, Vpoxy+ Cartridge, QT Plus Cartridge, (2) 6" Automix nozzles, and (4) 3" Automix nozzles. This BVM Epoxy Glue Starter Kit will introduce you to 3 great Aerospace Grade adhesives that can solve your most challenging assembly tasks. As a manufacture of high performance jet models, we know the importance of strong and long lasting bonds. Aeropoxy, VPoxy+, and QT Plus are used in some of the manufacturing processes of BVM ARF's and are depicted in our assembly manuals. Hobby grade epoxies can deteriorate with time. Aerospace Grade means that when your model is 10+ years old, those critical glue joints will still stand up to high speeds and G's. After you gain experience with this trio of epoxies, you can reorder individual cartridges as necessary.
$98.95Remove Before Flight. Handling your Kerosene powered model is a lot less messy if you plug off the fuel system overflow vent. You prevent the stinky spills in your vehicle and workshop. But, if you take-off with the vent still plugged, your engine will starve for fuel and flame out, usually one or two minutes into the flight. Unfortunately, this has happened to two customers recently. BVM's "Remove Before Flight" Vent Plug solves the problem. It would be hard to taxi out and not see the Red Flag dragging on the ground.
$11.99Carbon Fiber Flex Mounts and Doubler for a F-80/T-33
$48.95Braided loom neatly organizes your servo wires and pneumatic tubing. Use in conjunction with the BVM O-Clips (BVM# PA-SR-0026)
$8.95Machine cut from .015" Poly Ply These shims can be used to reinforce the fiberglass flanges on the hatch shelf. If the slot is a bit oversize, position the shim for the best hatch-to-fuse fit and then glue (Zap-A-Gap) it under the flange. Of course, scuff the mating surfaces with #80 grit sandpaper for best adhesion. Make final adjustments with a small PermaGrit flat file. Perfect the Canopy Hook-to-slot fit one at a time.
$6.95There are a number of devices on the R/C
market that help organize the installation of electronic and
pneumatic lines in your model. The "O-Clips" system will add a
new dimension to the task.  The "O-Clip" system is non-specific in regards to tubing diameter or wire size and allows grouping these components together where it is convenient,  Each package contains four each of three different sizes of "O-Clips", the appropriate size "O" rings (a few extra of each) and two rolled strips of 1/64" x 1/2" x 12" plywood. This group of 12 is sufficient for most medium to large size models. |
Main Gear Flex Mount Stiffener - Electra/Sabre
$19.003/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.
$7.50Ultimate Air Trap Mount There are multiple ways to mount the Ultimate Air Trap in a turbine powered model. Whatever method you choose, it is important to be able to observe the fuel/air action in the U.A.T. during throttle-up test. Easy removal of the U.A.T. is important to check for security of the cap, fittings (twice a year), and any possible contamination. (Very rare if the fuel is filtered). This mounting kit provides all of these requirements and will allow the U.A.T. to be set at the most advantageous angle (slightly nose up). The mount can be glued or screwed to the fuselage structure.
$14.95Static Electricity Build-up and Discharge in your turbine powered model. The effect of static electricity build-up and discharge is a problem associated with large capacity fuel systems in low humidity conditions. The electro-static charge is caused by the relative motion of two non-conductive materials such as fuel flowing through tubing, or fuel sloshing in an epoxy/Kevlar or plastic tank. The charge accumulation is greatly enabled by the lack of moisture in the air. The large fuel tanks and more powerful fuel pumping systems can accumulate 20,000+ volts. The discharge event can, and has on occasions, disabled the engine E.C.U. and even the R/C receiver. BVM's first confirmed experience with this phenomena was with the prototype Ultra Bandit on an unusually dry day in October '05. The discharge occurred as the wheels left the ground. We had to repair the model. Since low humidity is a rarity in Florida, it took us awhile to identify the problem and address the solution. The simple solution is this fuel additive. Just add 2 cap full's per 5 gal. mix of Jet A, Kerosene, or Diesel fuel.
$13.95Heat Shield + brush-on ceramic coating High Temperature exhaust gases from both turbine and piston engines are sometimes unavoidably close to parts of the airframe. Tailpipes and mufflers contain the flame but the convective heat can be too much for the surrounding balsa, plastic, or fiberglass structures. Three brushed on coats of this water based, ceramic material, "Heat Shield" will protect those exposed parts of your model. Simply treat the inside of the engine cowl (piston engines) or the inside of the aft fuselage (turbine) and the surface temperature of the model will remain cool. In the unusual case of a turbine tailpipe fire on start up, you will have several seconds longer to extinguish it before any damage to the model occurs. Heat Shield comes in an 8 oz. can and is easily applied with a brush, clean up with soapy water. For extra protection the thickness can be built up with additional layers of fiberglass cloth and Heat Shield. Experimenters can purchase this product and do their own testing if the above information is insufficient.
$18.25Sabre Jet Decals sized to fit the BVM 60", 63", F-86 These are freshly made waterslide decals (set of 5 sheets) that utilize the latest techniques and materials. The quality is superb. This set of 5 sheets will authentically adorn your F-86.
$75.003/16" Wheel Bushing
Quantity - 1 per package (2 per wheel required)
Oil-Lite bushings are a bit darker in color (than brass), and more porous in texture if viewed with a magnifying glass.
$2.253-1/2" MAIN WHEEL BRAKE O'RING
3-1/2" MAIN WHEEL BRAKE O'RING
Can be used on BVM Viper PNP, F-4, Bandit evo
$1.754" MAIN WHEEL BRAKE O'RING USED WITH: MiG-15, BVM F-16 1:6, BVM Cougar, BVM L-39, BVM F-18 1:7.75, F-86 1:5
$1.75BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$16.50BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$13.00BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$12.50BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$12.00BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
BVM's Solid Replacement Rubber Tire
4-1/16" Tire for F-100, F86(80), and Ultra Bandit.
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$35.00BVM's Solid Replacement Rubber Tire
4" Tire MiG-15
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$22.50BVM's Solid Replacement Rubber Tire
2-1/4" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$13.75BVM's Solid Replacement Rubber Tire
3-1/2" Tire F-4
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$33.50BVM's Solid Replacement Rubber Tire
2-5/8" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$14.95BVM's Solid Replacement Rubber Tire
3" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$18.50BVM's Solid Replacement Rubber Tire
3-1/2" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$21.50BVM's Solid Replacement Rubber Tire
3-1/4" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$21.50