Use For All Mechanical Mating Parts Metal To Metal - Metal To Plastic Its light viscosity allows it to penetrate quickly and lubricate from within. Its formulation of high quality waxes and PTFE promote friction free operation. Its liquid carrier evaporates and leaves the friction relieving chemistry. It guards against rust and corrosion and it does not attract dirt. Especially good for electronically driven retractable landing gear and mechanical moving parts of pneumatic gear. CAUTON: DO NOT apply to pneumatic cylinders.
$11.00 $10.003/16" dia. 1-1/2" long axles for BVM Duro-Struts, precision ground stainless steel Includes nylon washers and E clips
$10.00LED Aluminum Housing w/ Lines Lens
Parts that are included are in the photo. NO LED and NO WIRES are included.
$10.00LED Aluminum Housing w/Solid Lens
Parts that are included are in the photo. NO LED and NO WIRES are included.
$10.00Replacement Fork Tips with installation instructions. Clevis Pliers Replacement Tips available only to owners of the complete "Clevis Pliers" tool. Here's Why: BVM wants our products to be successful. There are instructions on how to use this precision tool that come with the complete Clevis Pliers package. The instructions are necessary for "success". Additionally, BVM makes an adjustment to the pliers to allow the Fork Tips to properly align.
$10.95Poly Ply .010" - 2pk
Three-Way Air Fitting will support 2MM or 3MM airline with included fittings.
$10.99BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
NOSE GEAR CYLINDER PUSH ROD
TO BE USED WITH THE BVM F-16 1:5 SCALE
$11.50Scuff Boards 20pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
G-10 (Epoxy F/G Plate Stock) - 3 per pack BVM developed the Hi-Flow Fuel System to benefit performance and reliability of model jet engines in the 180N (40# of thrust) class and larger. As stated on the BVM Hi-Flow web-page link, everything that the fuel passes through from the clunk to the engine fuel pump has been enlarged for higher volume, lower resistance, fuel flow.
$11.95Poly Ply .015" - 2pk
BVM Fuel Probe attaches to your fuel pump. This "Twist-Locks" into the fuel fill valve while fueling to create a leak proof seal.
$11.99Remove Before Flight. Handling your Kerosene powered model is a lot less messy if you plug off the fuel system overflow vent. You prevent the stinky spills in your vehicle and workshop. But, if you take-off with the vent still plugged, your engine will starve for fuel and flame out, usually one or two minutes into the flight. Unfortunately, this has happened to two customers recently. BVM's "Remove Before Flight" Vent Plug solves the problem. It would be hard to taxi out and not see the Red Flag dragging on the ground.
$11.99BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$12.00BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$12.50Air powered retractable landing gear, oleo struts, valves and brake systems occasionally need maintenance. If you ever have to disassemble any of these systems to clean them, there will be a need to replace the O-ring lubricant. Parker Super O-Lube is what we use at the BVM factory for all of our O-ring lubrication. It is a high viscosity lubricant that will not clog filters or lines, just use it sparingly. Packaged in this convenient 1/2oz tube, it is perfect to keep in your flight box.
$12.50BVM Fill Chuck #2192 Fill Chuck swivel end to fit 1/4" hose on electronic pumps For use with BVM Fill Valve's.
$12.956.3MM DIAMETER
43MM LENGTH
10MM HEAD
Can be used with: BVM YAK 1:4, BVM F-18 1:7.75, Older version L-39
$12.956MM DIAMETER
47MM LENGTH
9MM HEAD
Can be used with: BVM newer version L-39, Renegade, BVM newer version F-100
$12.956.3MM DIAMETER
47.6MM LENGTH
8MM HEAD
Can be used with: Older version BVM F-100 GFG
$12.95Poly Ply .020" - 2pk
The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
2 - 16MM X 25MM Spring
The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
2 - 16MM X 25MM Spring
2 - Nylon Spacer
The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
2 - .480 X 1.5 Spring
BVM's Tire Change Cone assists in changing the BVM Solid Rubber Tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$13.003/16" dia. Axles for 3/16" Wire Struts, precision ground and plated Includes nylon washers and E clips
$13.503/16" dia. axles for 5/32" wire struts, precision ground and plated Includes nylon washers and E clips
$13.50Velcro / Black adhesive backed 3/4 X 36 Very convenient to mount EVF power batteries. Works similar to the white adhesive product #PA-SR-0083 but is sometimes more convenient to cut, peel, and stick.
$13.50BVM's Solid Replacement Rubber Tire
2-1/4" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$13.75Static Electricity Build-up and Discharge in your turbine powered model. The effect of static electricity build-up and discharge is a problem associated with large capacity fuel systems in low humidity conditions. The electro-static charge is caused by the relative motion of two non-conductive materials such as fuel flowing through tubing, or fuel sloshing in an epoxy/Kevlar or plastic tank. The charge accumulation is greatly enabled by the lack of moisture in the air. The large fuel tanks and more powerful fuel pumping systems can accumulate 20,000+ volts. The discharge event can, and has on occasions, disabled the engine E.C.U. and even the R/C receiver. BVM's first confirmed experience with this phenomena was with the prototype Ultra Bandit on an unusually dry day in October '05. The discharge occurred as the wheels left the ground. We had to repair the model. Since low humidity is a rarity in Florida, it took us awhile to identify the problem and address the solution. The simple solution is this fuel additive. Just add 2 cap full's per 5 gal. mix of Jet A, Kerosene, or Diesel fuel.
$13.95Carbon Mat 8 1/2" X 22" 1/2 oz/sq. ft. 2 sheets
$14.75BVM's Solid Replacement Rubber Tire
2-5/8" Tire
BVM offers Tire Change Tools to help assist in changing your BVM Tires. It's so easy you can even change a tire at the flying field. BVM has several different jet wheel sizes and provides the tools to match each one. There are the Tire Change Cone and Wooden Push Tool. The Wooden Push Tool is specifically designed to work with more than 1 size cone - refer to the product description for the correct Push Tool.
$14.95