About 3 hours of modeling time and some Aeropoxy are required to make the upgrade. As with any high performance model, it is wise to occasionally disassemble it and check the critical glue joints.
$35.00BVM F-16 1:6 Nose Gear Door Light
Measurements:
32.2mm Length
17.3mm Width
15.35mm Depth
DISCLAIMER - This product is to be used with BVM Go Fly Jets only. Not guaranteed to work with other lighting systems. LED Light maximum voltage when testing is 3.7 volts.
$35.99Designed to be used with turbine powered models, this product from BVM protects from spilling fuel on the ground during the filling procedure and also to supply extra fuel for start-up.
The two large Buna O-Rings keep the tank from slipping off of your wing and protects from scratching its shiny surface.
These are very popular items at jet events so you may want to personalize yours for easy identification.
$37.95BVM Series Power Plug 3 used with 12S or 14S 3 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$38.99BVM Engine Mounting Adaptor Plates for BobCat with JetCat P-100
$39.95BVM Engine Mounting Adaptor Plates for KingCat with JetCentral Cheetah
$39.95BVM Engine Mounting Adaptor Plates for BobCat with JetCentral Rabbit
$39.95Engine Mounts Adaptors for: BVM BobCat Composite and KingTech K-100G
$39.95AIR OPERATED - SPRING RETURN BVM EZ-DROP simplifies the mounting and releasing of external stores without using a dedicated radio channel or servos. It operates via a single air line from the models retract system. Simply use the snap roll button to command a slight over travel on the retract system valve, and the tanks or bombs release instantly.
$39.95BVM F-18 1:5.5 Door Hinges 4/PK Assembly Required. Instructions and screws included.
$39.992-5/8" Rafale Nose Wheel Aluminum, Glass Beaded.Â
Cougar Clear Canopy, Windshield Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$40.00A Few Problems - EZ Fix
No models have crashed!
But, some owners choose to use more power than the recommended 140 Neuton engine, and sometimes hot shot pilots apply excessive "G's". And then, some use the primary former Arch Brace as a "handle" to lift the model. Others just tumbled after a real bad landing. Whatever the cause of fracturing this stress carry through "Arch Brace" is, it is easily made stronger with this option from BVM.
$44.50BVM F-16 1:6 Clear Canopy FWD Section Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$45.00BVM F-16 1:6 scale PNP Inlet Extension Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$45.00Carbon Fiber BobCat Composite Main Gear Flex Arms - pr
$45.00