BVM F-16 1:5 Main Gear Unlocking Cylinder Assembly
$179.99Multi Function 3-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$179.00BVM F-16 1:6 scale PNP Stainless Steel Tailpipe Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$175.00Super Flow Inlet Duct for BVM F-86 63" ARF. In our efforts to constantly improve the efficiency of the BVM EVF powered airframes, we took a close look at the F-86 inlet duct. We found that with some contour changes and the inclusion of a center mounted spike we could gain some performance. The airflow from the nose cone inlet to the fan rotor is now much improved. This is all new tooling and both the static and flight tests confirm the performance increase. It's an easy to install, worthwhile upgrade to an EVF powered F-86. Installing this duct assembly in any existing BVM Sabre designed for EVF or D/F power will yield an additional 1 pound of static thrust. The weight addition is .6 oz.
INCLUDES:
Mylar Thrust Tube, FWD Battery Shelf, Inlet Assembly, Carbon Cord, and hardware
The Jet-Foam Cradle for the BVM Cougar is designed to allow you to work on the model right side up or upside down, exercise the landing gear and flaps, with or without the vertical fin attached. The Cradle can be used on the ground or on a portable 30" high table. Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$165.00KingCat Pylons (pair) complete with EZ-DROP's, air install and hardware
$159.99Bandit ARF MKII Kevlar Hopper Tank for increased fuel capacity. 34oz *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$155.00The BobCat Composite Jet-Foam Cradle is designed to ease the handling of the model during the work shop assembly stage, field handling, and transport - Booms on or off. Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00BVM F-16 1:5 Bypass & Cover Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$155.00BVM F-16 1:6 PNP Jet-Foam Cradle Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00BVM Jet-Foam Cradle for BVM L-39 1/5th Scale Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00Originally developed for the BVM 84" Sabre Jet, this Jet-Foam Cradle works well for many medium size jets such as the Bandit, Electra, MiG-15, and F-100. The distance between the End Brackets can be adjusted on the PVC Tubes and the Velcro Straps will hold the model for field assembly, disassembly, and transport, as well as being very handy in the shop while you work on the model. Review the accompanying enclosures and the photos below to see the advantages a BVM Jet-Foam Cradle offers. Modify as desired A razor saw or sharp knife can be used to put a "V" notch in an End Bracket if that best suits your model. Outline the desired modification with tape, then cut. Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00The Ultra Bandit Jet-Foam Cradle is the largest in BVM's line of airframe handling products. The PVC tubes are longer (38") and the forward End Bracket is wider to carefully handle the inlet ducts without damage. For lots of handling, building, and transporting conveniences, the Ultra Bandit fuselage aft section is removable. This special Jet-Foam Cradle allows support of the front half (with the aft fuse section removed) to allow engine access, fuel tanks, etc. NOTE: Extra lengths (12 feet) of the 1-1/2 wide Velcro straps (BVM # PA-SR-0079) are available to assist in mounting the Jet Foam Cradle to a trailer shelf or floor for safe and soft transport. Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00BVM F-16 1:5 Nose Cone - Alaska Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$125.99BVM F-16 1:5 Nose Cone - General Dynamics Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$125.99BVM F-16 1:5 Nose Cone - Grey Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$125.99BVM F-16 1:5 Nose Cone - Indiana ANG Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$125.99BVM F-16 1:5 Nose Cone - Thunderbird Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$125.99Bobcat Composite, Bobcat XL, and Classic Bandit Hopper Tank 16 oz w/ hardware - No U.A.T. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$125.00BVM F-16 1:5 LEFT Fuel Tank including hardware 3 Liter Tank Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$120.00BVM F-16 1:5 RIGHT Fuel Tank including hardware 3 Liter Tank Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$120.00BVM F-18 5.5 Main Gear Linkage Assembly - LEFT
$119.99BVM F-18 5.5 Main Gear Linkage Assembly - RIGHT
$119.991;7.75 F/A-18F Main Gear Unlocking Cylinder Assembly
$109.99BVM F-16 1:6 scale PNP Main Gear Unlocking Cylinder Assembly
$109.99BVM F-16 1:5 Sidewinder - Painted Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$103.99BVM F-16 1:5 Sidewinder - White Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$103.99BVM F-16 1:6 scale PNP Main Gear Axle Carrier - Left
$103.50BVM F-16 1:6 scale PNP Main Gear Axle Carrier - Right
$103.50BVM F-16 1:5 Inlet Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$102.99BVM Epoxy Starter Kit includes: Glue Gun, Aeropoxy Cartridge, Vpoxy+ Cartridge, QT Plus Cartridge, (2) 6" Automix nozzles, and (4) 3" Automix nozzles. This BVM Epoxy Glue Starter Kit will introduce you to 3 great Aerospace Grade adhesives that can solve your most challenging assembly tasks. As a manufacture of high performance jet models, we know the importance of strong and long lasting bonds. Aeropoxy, VPoxy+, and QT Plus are used in some of the manufacturing processes of BVM ARF's and are depicted in our assembly manuals. Hobby grade epoxies can deteriorate with time. Aerospace Grade means that when your model is 10+ years old, those critical glue joints will still stand up to high speeds and G's. After you gain experience with this trio of epoxies, you can reorder individual cartridges as necessary.
$98.95