English
Categories
- PNP/Go Fly Accessories
- Kit Accessories
- HSD Jets
- PowerBox
- Carbon Fiber
- Air Systems
- Accessories
- Installation Organizers
- Building Materials
- Finishing Materials
- Adhesives
- Electric VioFan (EVF)
- Chargers / Power Supplies
- Electric Accessories
- Batteries
- Turbine Mounts & Straps
- Turbine Accessories
- Fuel Cells
- Fuel System Accessories
- Jersey Modeler
- Cockpits
- Lubricants
- PermaGrit
- Tools
- Radio Gear
- Pilots
- Landing Gear
- Wheels Tires and Brakes
- Jet Cases / Cradles
- Specials
- Apparel and Gifts
- Books
- Gift Certificates
- Penn Bags
Featured [more]
QT Plus Glue Cartridge
Fuel Line Plug
Heatshield
Heat Shield + brush-on ceramic coating High Temperature exhaust gases from both turbine and piston engines are sometimes unavoidably close to parts of the airframe. Tailpipes and mufflers contain the flame but the convective heat can be too much for the surrounding balsa, plastic, or fiberglass structures. Three brushed on coats of this water based, ceramic material, "Heat Shield" will protect those exposed parts of your model. Simply treat the inside of the engine cowl (piston engines) or the inside of the aft fuselage (turbine) and the surface temperature of the model will remain cool. In the unusual case of a turbine tailpipe fire on start up, you will have several seconds longer to extinguish it before any damage to the model occurs. Heat Shield comes in an 8 oz. can and is easily applied with a brush, clean up with soapy water. For extra protection the thickness can be built up with additional layers of fiberglass cloth and Heat Shield. Experimenters can purchase this product and do their own testing if the above information is insufficient.
$18.25
Hi-Flow Disc
G-10 (Epoxy F/G Plate Stock) - 3 per pack BVM developed the Hi-Flow Fuel System to benefit performance and reliability of model jet engines in the 180N (40# of thrust) class and larger. As stated on the BVM Hi-Flow web-page link, everything that the fuel passes through from the clunk to the engine fuel pump has been enlarged for higher volume, lower resistance, fuel flow.
$11.95
HSDJETS HF-16 Foam Turbine Black Camo Colors PNP V2.0
SPECIFICATIONS:
Wingspan: 1344mm (52.9in)
Length: 1809mm (71.2in)
Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene)
Turbine Engine: 6-8KG brushless (required & not included)
Cruising speed: 150-200 km/h
Flying time: 3-5 mins
Wing area: 47.6 dm2
Wing load: 178.6 g/dm2
Main material: 20 times the import of aeromodelling EPO
Painting surface: Matte environmental water-borne paint + decal
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40
Radio System: 6 channel (required & not included)
Control System: MFC-2085
Servos (All 7.4V High voltage)
40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward)
25gx2 Metal gear with 150mm lead (left & right Aileron forward)
25gx1 Metal gear with 230mm lead (Rudder forward)
12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward)
12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward)
12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward)
12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward)
Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm)
CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing
Landing Gears All-metal simulation electronic retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Nosex1
Cockpit canopyx1
Vertical Stabilizerx1
Left Horizontal tailx1
Right Horizontal tailx1
L/R Auxiliary tankx1
L/R wingtip missilex1
L/R wingtip missile pylonx1
L/R No.1 missilex1
L/R No.2 missilex1
L/R tail finsx1
Main wing carbon tube L=400mm external diameter 10mmx2
Accessories Bag x1
Fuselage antenna x1
Pitotx1
Screw (HA3x14mm)x10 (Nose & Engine)
Screw (HM3x6mm)x2 (Horizontal tail)
Screw (HA3x10mm)x8 (Tail nozzle & Vertical)
Screw (KA3x16mm)x8 (Missile)
Screw (KA3x20mm)x8 (Missile)
Screw (KM3x60mm)x8 (Auxiliary tank)
Screw (HM3x10mm)x8 (Main wing)
HF-16 V2 Manualx1
MFC-2085 Manualx1
REQUIRES:
SW 6-8KG brushless (required & not included)
6 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,529.90
HSDJETS HF-86 Foam Turbine Sky Blazer Colors KIT
SPECIFICATIONS: Wingspan 1720 mm (67.7 in) Length 1715 mm (67.5 in) Weight --- Turbine Engine 8KG-12KG (required & not included) Cruising speed --- Flying time --- Wing area 64.34 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch) CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs Horizontal tailx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs Main wing carbon tube L=598mm external diameter 16mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA4x45mm)x4 pcs (Horizontal tail) Screw (HM4x20mm)x4 pcs (Wing) Screw (HM4x16mm)x4 pcs (Wing) Screw (HA3x10mm)x16 pcs (Vertical tail / Nose) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x60mm)x4 pcs (Nose) Screw (HM4x70mm)x8 pcs (Auxiliary tank) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male)x8 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Metal electric retractable hydraulic landing gearx3 (required & not included)
$799.90
HSDJETS HJ-10 Foam Turbine Black Colors KIT
SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Weight ---
Turbine Engine 8KG-12KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 64 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Vectoring nozzle Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$899.90
HSDJETS HJ-10 Turbine CAF NEW (DARK BLUE) PNP with Vectoring
SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG-12KG (required & not included)
Cruising speed 160-180 km/h
Flying time 4-6 mins (full throttle)
Wing area 64 dm2
Wing load 164.1 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085
Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Vectoring nozzle Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60x21.3x14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,500.00
HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors KIT
SPECIFICATIONS:
Wingspan:1245mm (49in)
Length:1809mm (71.2in)
Weight: 3.1kg (6.82 lb) (for reference only )
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless (required & not included)
Number of EDF Blade: 11 blades (required & not included)
Cruising speed: about 180 km/h (For reference only )
Flying time: about 3-5 mins (For reference only )
Wing area: 47 dm2
Wing load: 129.8 g/dm2 (For reference only )
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150 (required & not included)
Control System: MFC-2085 (required & not included)
Servos: (required & not included)
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360 lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: No
LED lights system: No
Electromagnetic brake system: No
Reinforced gyro selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/145.6x51.8x33.7(cm)
CG (Center of Gravity): 178mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=320mm diameter=10mmx2
White Stickerx1
Accessories Bag 1 x1
Horizontal steel wire rod(3x88mm)x2 (Horizontal Stabilizer)
Aileron steel wire rod(1.8x88mm)x2 (Aileron)
Wing lampshadex2
Fuselage lampshadex6
Vertical Stabilizer lampshadex2
Nylon cable tiesx5
Screw (PWA2x8mm)x8 (Control box)
Steering steel wire(1.5x35mm)x1 (Nose landing gear)
Wire rod steel wire(1.8x60mm)x1 (Vertical Stabilizer)
Wire rod steel wire(1.7x65mm)x1 (Nose wheel locking servo)
Wire rod steel wire(1.7x65mm)x1 (Left wheel locking servo)
Wire rod steel wire(1.2x41mm)x2 (Main wheel Cover)
Wire rod steel wire(1.2x41mm)x1 (Nose wheel Cover)
Screw (PM2.5x6mm)x1 (Main wheel Cover)
Screw (PM2.5x10mm)x1 (Main wheel Cover)
Wire rod steel wire(1.7x80mm)x1 (Right wheel locking servo)
Screw (PM3x12mm)x4 (Horizontal Stabilizer rod fixation with self-locking nut)
Screw (PM2x10mm)x6 (Wing/vertical Stabilizer rod fixation with self-locking nut)
Accessories Bag 2 x1
Screw (HM3x6mm)x2 (Horizontal Stabilizer)
Screw (HA3x10mm)x4 (Tail nozzle)
Screw (HM3x10mm)x4 (Wing)
Screw (HA3x8mm)x4 (Vertical Stabilizer)
Screw (HA3x14mm)x5 (Nose 1,Engine 4)
Accessories Bag 3 x1
Screw (HM3x10mm)x4 (Wing Spare)
Screw (HA3x14mm)x5 (Nose 1,Engine 4 Spare)
Screw (HA3x8mm)x4 (Vertical Stabilizer Spare)
Screw (HA3x10mm)x4 (Tail nozzle Spare)
Accessories Bag 4 x1
Nylon rocker arm of the servo x2 (Spare)
Nylon antennax1
Nylon airspeed tubex1
Manualx1
REQUIRES:
6+ channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (MFC-2085)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (S-EDF)
LiPo battery charger
Landing gear
Servos
S-EDF 105mm 4270/750KV brushless motor
MFC-2085 Control System
All wire
ESC 160A/12S Hobbywing AS150
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$650.00
Insulating Cloth Adhesive Tape
Insulating Cloth Adhesive Tape with great abrasion resistance 3/4 X 100ft Good adhesion to multiple surfaces and works great on a wide variety of applications.
$19.99
JR 12X Eneloop core upgrade
JR Transmitter Battery Upgrade Includes E-Z solder tabs for connecting + and - wires. BVM has been flying Sanyo eneloop cells for several months now with excellent results. Now, you can fly a whole weekend on one charge! These batteries have no memory effect and feature an extremely flat discharge curve providing consistent power longer than other cells. To install, simply remove 4 screws and a tape seal from the battery case, and resolder (2) tabs to the + and - terminals. As always, read the charging instructions that accompany the eneloop batteries.
$56.00
KingCat Nose Gear Pocket
When flying off wet grass or a puddled runway, the nose wheel can spray water up into the wheel well. Since there are electrical components in that area of the fuselage, there is a chance that they could be affected. This plastic cover box can be installed to prevent a problem from occurring.
$34.50
KingCat Pylons (pair)
KingCat Pylons (pair) complete with EZ-DROP's, air install and hardware
$159.99
L-39 1:5 Clear Canopy
L-39 1:5 Clear Canopy Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$65.00
L-39 Main Flex Plates - Current Style
L-39 Main Flex Plates - PAIR Current Style
PLEASE SEE DIAGRAM FOR MEASUREMENTS.
$25.00
L-39 Main Flex Plates - Original Style
L-39 Main Flex Plates - PAIR Original Style
PLEASE SEE DIAGRAM FOR MEASUREMENTS.
$25.00
L-39 Main Strut Spring
L-39 Main Strut Springs **This package is for one strut. If you need springs for both struts, order two packages**
$9.99
Large Push Tool
BVM's Large Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 4" and larger.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50
Main Gear Flex Mount Stiffener - Electra/Sabre
Main Gear Flex Mount Stiffener - Electra/Sabre
$19.00
Main Gear Mount Reinforcement Kits
Bandit ARF MKI & MKII & eBandit Main Gear Reinforcement Kits.
$32.50
Medium Push Tool
BVM's Medium Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 3" to 3-1/2" tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50
Metric E'Clips & C'Clips
Assortment of Metric E'Clips and C'Clips Includes: EClip M2.5, EClip M3, EClip M4, EClip M5, CIRClip M8, and CIRClip M10
$8.50
Multi Function 3-Way Block Valve
Multi Function 3-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$179.00
Multi Function 5-Way Block Valve
Multi Function 5-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$299.00
Multi Function 7-Way Block Valve
Multi Function 7-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$419.00
Multi Function 9-Way Block Valve
Multi Function 9-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$539.00
My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,499.90
My Hobby HT-45 by HSDJETS Foam Turbine Blue Navy Colors KIT
**Does Include Correct Tail Marking Decals**
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors KIT
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
Nose Gear Strut Pin Brass Adapter
Nose Gear Strut Pin Brass Adapter Will work with a 6MM Diameter Nose Gear Pin
$9.99
Nose Strut Spring Upgrade
The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
1 - 8MM X 20MM Spring
1 - 8MM X 20MM Spring
1 - Nylon Spacer
Philip Wrench Set, Metric 4pcs
ENGRAVED Philips Wrench Set 4pcs Titanium Coated Tips
~FREE PERSONALIZED ENGRAVING ON THE TOOLS~
Take the guess work out of who's tool it is. 4 Piece Set Includes: PHILIPS 3.0mm X 180mm PHILIPS 4.0mm X 180mm PHILIPS 5.0mm X 180mm PHILIPS 6.0mm X 180mm
** Please note that the personalized custom engraved tools are made per order and the turn around time frame is about 4 - 6 weeks.
$24.99