BVM's Small Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 2-1/8" to 2-5/8".
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 2 Purple Plugs
$6.99Super Bandit, F-86 Nose Gear Flex Arms-pr Will work with the F-80/T-33 AFS with Purple Gear.
$16.50Air powered retractable landing gear, oleo struts, valves and brake systems occasionally need maintenance. If you ever have to disassemble any of these systems to clean them, there will be a need to replace the O-ring lubricant. Parker Super O-Lube is what we use at the BVM factory for all of our O-ring lubrication. It is a high viscosity lubricant that will not clog filters or lines, just use it sparingly. Packaged in this convenient 1/2oz tube, it is perfect to keep in your flight box.
$12.50Three-Way Air Fitting will support 2MM or 3MM airline with included fittings.
$10.99Velcro / Black adhesive backed 3/4 X 36 Very convenient to mount EVF power batteries. Works similar to the white adhesive product #PA-SR-0083 but is sometimes more convenient to cut, peel, and stick.
$13.50This infinitely adjustable, 1-1/2" wide 12 ft length, strap wraps onto itself for a secure hold. Hook on one side, loop on the other in one convenient piece.
$24.95Velcro Strap / Black 1-1/2 X 32 Hook on one side, Loop on the other; this heavy duty strapping can be used to hold heavy batteries in the model. It can also serve to hold the models in a van or on a trailer shelf.
$8.50Velcro Strap / Black 3/4 X 24; (2) Can be used to reinforce the adhesive product (above) to add a firm retaining strap to hold batteries etc.
$9.25Velcro Strap / Black 3/8 X 24; (2) It conveniently hand separates (without scissors) in 6 inch lengths. You will find many other uses for it when gearing-up your model.
$5.10Velcro / White adhesive back 2 X 6; (2) This Hook n' Loop product has a very aggressive adhesive backing and very aggressive Hook n' Loop gripping power. Cut to size with sharp scissors. Apply the prickly side to a smooth Zap or painted surface and the fuzzy side to a battery or receiver.
$7.50The one piece wheel hubs have Oil-Lite bushings pressed into each side. The gap between the bushings should be packed with Wheel Axle Grease. Practice has shown that most BVM wheels should be repacked about every 2 dozen flights.
$7.993/16" Wheel Bushing
Quantity - 1 per package (2 per wheel required)
Oil-Lite bushings are a bit darker in color (than brass), and more porous in texture if viewed with a magnifying glass.
$2.25Wheel Bushing Used On; F-16 1:5 Main Wheel, F-18 5.5 Main Wheel **BVM Wheels Need QTY 2 Bushings**
$6.50White LED Light with Heatsink DISCLAIMER - This product is to be used with BVM Go Fly Jets only. Not guaranteed to work with other lighting systems. LED light maximum voltage when testing is 3.7 volts.
$19.99We got
tired of fixing wing tip scratches and faced up to reality - it's just going to
happen occasionally. So, if your landings are not always perfect, you may also
find a need for some truly tough wingtip skids.
  Â
Braided loom neatly organizes your servo wires and pneumatic tubing. Use in conjunction with the BVM O-Clips (BVM# PA-SR-0026)
$8.95BVM Oxford LongSleeve - Small size with BVM Jets embordery
Teflon™ tough, this stylish shirt is made from a 65% polyester/35% cotton blend and is treated with Teflon™ fabric protector for stain resistance. It features a soft-touch finish, wrinkle resistance, a button-down collar, a double-back yoke, two side back pleats, a patch pocket with pencil compartment and bone-horn buttons.
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$35.00Carbide Cutters (set of 5) We discovered some really great motor tool cutters that will really speed up your model building chores. These carbide cutters feature a drill point end with a fine tooth, high helix design cutting edge that really eats through plywood, fiberglass or carbon fiber. Each pack contains (2) 1/16", (2) 3/32", and (1) 1/8" diameter cutters all with a 1/8" shank to fit your motor tool. Once you try them, you'll never want to be without them and you can't beat the price! As always wear safety glasses when working with rotary cutters of any kind.
$28.95Hi-Flow UAT with line reducer, 8mm tubing, 6mm tubing, fill plug
We have flown it extensively in every BVM factory demo jet and have tried every possible maneuver and unusual attitude combined with every possible throttle position - you just can't make it quit! All BVM fuel cell packages (for BVM jets) now come standard with a U.A.T. The mystery material, duck bill shaped sack inside will deliver a solid stream of fuel (no bubbles) to the fuel pump even if the 4oz bottle should get 3/4th's full of air, which is very unlikely. This is a very high quality product for those turbine pilots who want to eliminate the possibility of an air bubble causing a flame out. The U.A.T. is placed in series between the last fuel tank and the fuel pump. The system is filled through the 3rd line in the U.A.T. The rectangular shaped tank can be mounted vertically or horizontally and produce the same results making it convenient to fit into just about any model and it will work with any model size turbine engine.
$84.95