3/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.
$7.50Aluminum Cap Fittings fits Sullivan and Dubro tanks. Here is a fuel tank cap system that will not flex and deteriorate with time. The machined aluminum cap and threaded disc capture the standard rubber stopper and squeeze it securely with a 4-40 socket head machine screw. Results are a leak proof cap, even when pressure is applied to the fuel system. The 5/32 diameter soft brass tubing allows freer flow of the fuel as required by some of today's larger engines. BVM uses this system on their ducted fan installations as well as for turbine fuel systems. Other specialty enthusiasts will surely want this fuel system improvement as well. Each cap system contains one rubber stopper for use with glow fuel and one compatible with petroleum liquids, adaptable to Sullivan or Du-bro tanks.
$17.95The Bandit fuel system consists of 2 conformal Kevlar fuel cells, an 8oz plastic header tank and the Ultimate Air Trap (U.A.T.) which provides 2.8 Liters of fuel. BVM's Aluminum Cap Fittings are supplied for use with the plastic hopper tank along with all fuel line necessary to plumb the system. The U.A.T. acts as an air bubble eliminator and final filter. NOTE: A large Kevlar header tank is available. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$295.00Bobcat Kevlar Fuel Cells (2.5 Liters) includes - 2 Kevlar tanks and hardware (assembly with Aeropoxy required), (1) Sullivan BT 16oz tank with BVM Aluminum Cap system, (1) U.A.T., T-Fittings, overflow fitting, and fuel tubing. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$295.00Bobcat XL Kevlar Fuel Cells (2.0 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$375.00Classic Bandit Kevlar Fuel Cells (2.4 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00Save your fingers! This new modeling tool makes rigging control systems easier, faster, less frustrating, and saves wear and tear on your fingers. Access into hard-to-reach areas are now much easier and you don't need a screw drivers that can slip and puncture the the adjacent surface.
For all #2-56 and #4-40 Metal Clevises
Replacement Fork Tips are available! Yes, if you accidently drop the pliers on a hard floor, the tips may break.
$32.95
Electra "T" and ARF Fuels Cells (1.75 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$255.00Engine Strap Screw Clamp 95-100MM BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00EVF 9 Blade 12S Fan Unit. An additional 3 Lbs. of thrust is available with the EVF ~3~ 12s system. A larger motor and 2 extra LiPo cells gives us a fan system that will drive a 19-24 Lb. model with convincing jet-like performance. A properly built model in the 19-21 Lb. range that is equipped with landing gear doors (as all BVM jets are) can easily yield 7-8 minutes of flight time on ThunderPower 7700mAh LiPo's.
$1,595.00F-100 Fuel Cells (4.8 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$450.00F-4 Fuel Cells (4.1 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$352.00F-80/T-33 Kevlar Fuel Cells (2.7 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$352.00F86 80 Fuel Cells (4.3 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$450.00Kingcat Fuel Cells (4.8 Liters) includes - 2 Kevlar tanks and hardware (assembly with Aeropoxy required), (1) Sullivan BT 16oz tank with BVM Aluminum Cap System, (1) U.A.T., T-Fittings, overflow fitting and fuel tubing. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$395.00MiG 15 Kevlar Kerosene Fuel Cells (2.8 Liters) 3 Kevlar fuel cells w/hardware and 1 U.A.T *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$398.00Rafale B-01 - Single Engine (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$485.00Rafale B-01 - Twin Engine with (2) U.A.T.'s (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$500.00Super Bandit Kevlar Fuel Cells (3.7 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% Faster As good as Aeropoxy but cures in 1/2 the time. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% Faster As good as Aeropoxy but cures in 1/2 the time. Vpoxy+ Kit includes: 2 Vpoxy+ Glue Cartridges, Dispensing Gun, 2:1 Plunger, 2 Long Glue Mix Nozzles, 4 Short Glue Mix Nozzles Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$87.95Heavy Clunks for Turbine Fuel Tanks These heavy fuel pick up "Clunks" will improve the function of your jet fuel tanks. They are 2 1/2 times the weight of the standard parts, yet still fit through the neck of the BVM Kevlar Fuel Tank hardware.
$4.75Engine Strap Screw Clamp 100-105MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00EVF Shroud and Mounting Hardware We are making the EVF shroud and mounting hardware available for BVM kit builders. This setup will facilitate the placement of inlets and tailpipes in your electric jet model. Simply use the shroud while building, then pop in your EVF when your model is complete and ready for power. There is a $75.00 charge for the shroud, you may return it to BVM for a $50.00 refund. This is a service offered only by BVM.
$75.00Engine Strap Screw Clamp 105-110MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00AIR OPERATED - SPRING RETURN BVM EZ-DROP simplifies the mounting and releasing of external stores without using a dedicated radio channel or servos. It operates via a single air line from the models retract system. Simply use the snap roll button to command a slight over travel on the retract system valve, and the tanks or bombs release instantly.
$39.95To compliment our pneumatic powered EZ-DROP, we also offer this similar device intended to ease the mounting and removal of external stores by simply pulling aft on the cable. Tanks, bombs and missiles really add to the "presence" and "scale realism" of jet models whether they be on static display or in action at 150 + m.p.h. Handling and transporting the model with external stores however, can be a cumbersome task and sometimes results in damage to fins or pylons. We think you will find the BVM EZ-Hangers a very handy accessory when adding some "parasites" to your jet. EZ-Hangers fit into the same size opening and utilize the same bolt pattern as the EZ-DROPS, they are interchangeable.
$25.95NACA Inlets For summer operation. Adding these NACA flush cooling air inlets to an EVF powered jet will reduce the end-of-the-flight temperatures (motor/batteries) by 8-10°F compared to a non ventilated installation. The inlet design allows the cooling air to enter the fuselage with very little drag losses. The inlets can be added to a finished model.
$18.95Designed to be used with turbine powered models, this product from BVM protects from spilling fuel on the ground during the filling procedure and also to supply extra fuel for start-up.
The two large Buna O-Rings keep the tank from slipping off of your wing and protects from scratching its shiny surface.
These are very popular items at jet events so you may want to personalize yours for easy identification.
$37.95The EVF "9er" units have a BVM purple anodized spinner. It looks real sporty and definitely identifies the product as "BVM". When the unit is installed in most jets, the spinner is not visible. Not so, with the all electric A-10.
$8.50Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$29.95Re-Formulated - QT Plus produces a bond that is almost as strong as BVM's Aeropoxy, but allows for quick assembly and field repairs. Set time is 4 - 5 minutes. Sometimes, it may be convenient to not use the mix nozzle. Just squeeze out a small amount of glue and blend the two streams of glue with a mix stick. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95BVM Series Power Plug 2 used with 10S 2 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$33.99