BVM Series Power Plug 3 used with 12S or 14S 3 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$38.99Engine Strap Screw Clamp 110-115MM Engine Diameter BVM now offers new Engine Straps for turbine engines. These Engine Strap Screw Clamps are great for all types of engines. The straps are not engine specific and fit a wide range of diameters. NOTE: The Engine Straps and Mounts are sold individually.
$15.00Use these Syringes to neatly apply Aeropoxy, Vpoxy, and QT Poxy into hard to reach places such as formers inside a fuselage. They are also handy for applying a fine bead around fuel tank fittings.
$4.95Super Flow Inlet Duct for BVM F-86 63" ARF. In our efforts to constantly improve the efficiency of the BVM EVF powered airframes, we took a close look at the F-86 inlet duct. We found that with some contour changes and the inclusion of a center mounted spike we could gain some performance. The airflow from the nose cone inlet to the fan rotor is now much improved. This is all new tooling and both the static and flight tests confirm the performance increase. It's an easy to install, worthwhile upgrade to an EVF powered F-86. Installing this duct assembly in any existing BVM Sabre designed for EVF or D/F power will yield an additional 1 pound of static thrust. The weight addition is .6 oz.
INCLUDES:
Mylar Thrust Tube, FWD Battery Shelf, Inlet Assembly, Carbon Cord, and hardware
Poly Ply .010" - 2pk
Poly Ply .015" - 2pk
Poly Ply .020" - 2pk
Poly Ply assorted pack (1 sheet of each .010", .015" and .020")
Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$34.95Safety Wire - for fuel and airline connections. This aircraft grade stainless steel safety wire has been tested by BVM and packaged for convenient shop and in-the-field use. .020 SS WIRE
$6.00
SPECIFICATIONS:
Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085
Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs
REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,549.90Classic Bandit Electric Tailpipe Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Please specify the Length and Exit Diameter when you check out.Â
E Bandit Electric Tailpipe Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Electra Tailpipe - 31.375" length 3.5" exit diameter Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
F-16/ early Viper/ early Agg Tailpipe
F-4 Electric Tailpipe
F-80 Electric Tailpipe
F-86 (60") Tailpipe
Maverick PRO/Ultra Viper/Agg III Tailpipe
Maverick Tailpipe
Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Milled Fiber 4oz
To strengthen glue joints.
These 1/32" long fiberglass fibers will add strength to an epoxy glue joint. Milled fiber also thickens the glue mix so it will stay where you put it.
A combination of some milled fiber with microballoons and resin will also yield a stronger fillet material.
Pin Hole Filler 6oz
T-33 Tailpipe