English
Categories
- PNP/Go Fly Accessories
- Kit Accessories
- HSD Jets
- PowerBox
- Carbon Fiber
- Air Systems
- Accessories
- Installation Organizers
- Building Materials
- Finishing Materials
- Adhesives
- Electric VioFan (EVF)
- Chargers / Power Supplies
- Electric Accessories
- Batteries
- Turbine Mounts & Straps
- Turbine Accessories
- Fuel Cells
- Fuel System Accessories
- Jersey Modeler
- Cockpits
- Lubricants
- PermaGrit
- Tools
- Radio Gear
- Pilots
- Landing Gear
- Wheels Tires and Brakes
- Jet Cases / Cradles
- Specials
- Apparel and Gifts
- Books
- Gift Certificates
- Penn Bags
HSDJETS T-33 Foam Turbine Yellow ribbon Colors PNP XT60 plug
SPECIFICATIONS:
Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085
Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs
REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,549.90
Insulating Cloth Adhesive Tape
Insulating Cloth Adhesive Tape with great abrasion resistance 3/4 X 100ft Good adhesion to multiple surfaces and works great on a wide variety of applications.
$19.99
JR 12X Eneloop core upgrade
JR Transmitter Battery Upgrade Includes E-Z solder tabs for connecting + and - wires. BVM has been flying Sanyo eneloop cells for several months now with excellent results. Now, you can fly a whole weekend on one charge! These batteries have no memory effect and feature an extremely flat discharge curve providing consistent power longer than other cells. To install, simply remove 4 screws and a tape seal from the battery case, and resolder (2) tabs to the + and - terminals. As always, read the charging instructions that accompany the eneloop batteries.
$56.00
Kingcat Fuel Cells (4.8 Liters)
Kingcat Fuel Cells (4.8 Liters) includes - 2 Kevlar tanks and hardware (assembly with Aeropoxy required), (1) Sullivan BT 16oz tank with BVM Aluminum Cap System, (1) U.A.T., T-Fittings, overflow fitting and fuel tubing. *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$395.00
KingCat Nose Gear Pocket
When flying off wet grass or a puddled runway, the nose wheel can spray water up into the wheel well. Since there are electrical components in that area of the fuselage, there is a chance that they could be affected. This plastic cover box can be installed to prevent a problem from occurring.
$34.50
KingCat Pylons (pair)
KingCat Pylons (pair) complete with EZ-DROP's, air install and hardware
$159.99
L-39 1:5 Clear Canopy
L-39 1:5 Clear Canopy Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$65.00
L-39 Main Flex Plates - Current Style
L-39 Main Flex Plates - PAIR Current Style
PLEASE SEE DIAGRAM FOR MEASUREMENTS.
$25.00
L-39 Main Flex Plates - Original Style
L-39 Main Flex Plates - PAIR Original Style
PLEASE SEE DIAGRAM FOR MEASUREMENTS.
$25.00
L-39 Main Strut Spring
L-39 Main Strut Springs **This package is for one strut. If you need springs for both struts, order two packages**
$9.99
Large Push Tool
BVM's Large Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 4" and larger.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50
LED Aluminum Housing w/ Lines Lens
LED Aluminum Housing w/ Lines Lens
Parts that are included are in the photo. NO LED and NO WIRES are included.
$10.00
LED Aluminum Housing w/Solid Lens
LED Aluminum Housing w/Solid Lens
Parts that are included are in the photo. NO LED and NO WIRES are included.
$10.00
LED Lens Cover
LED Lens Cover
Parts that are included are in the photo. NO LED and NO WIRES are included.
$4.50
Main Gear Flex Mount Stiffener - Electra/Sabre
Main Gear Flex Mount Stiffener - Electra/Sabre
$19.00
Main Gear Mount Reinforcement Kits
Bandit ARF MKI & MKII & eBandit Main Gear Reinforcement Kits.
$32.50
Mav Pro/Ultra Viper/Agg III Mylar Tailpipe
Maverick PRO/Ultra Viper/Agg III Tailpipe
Maverick Mylar Tailpipe
Maverick Tailpipe
Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Medium Push Tool
BVM's Medium Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 3" to 3-1/2" tires.
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50
Metric E'Clips & C'Clips
Assortment of Metric E'Clips and C'Clips Includes: EClip M2.5, EClip M3, EClip M4, EClip M5, CIRClip M8, and CIRClip M10
$8.50
MiG 15 Kevlar Kerosene Fuel Cells
MiG 15 Kevlar Kerosene Fuel Cells (2.8 Liters) 3 Kevlar fuel cells w/hardware and 1 U.A.T *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$398.00
Milled Fiber 4oz
Milled Fiber 4oz
To strengthen glue joints.
These 1/32" long fiberglass fibers will add strength to an epoxy glue joint. Milled fiber also thickens the glue mix so it will stay where you put it.
A combination of some milled fiber with microballoons and resin will also yield a stronger fillet material.
Multi Function 3-Way Block Valve
Multi Function 3-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$179.00
Multi Function 5-Way Block Valve
Multi Function 5-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$299.00
Multi Function 7-Way Block Valve
Multi Function 7-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$419.00
Multi Function 9-Way Block Valve
Multi Function 9-Way Block Valve. To be used in conjunction with the CCU. Each Valve controls an action. Example: Gear Up One Valve, Gear Down One Valve. Valve Blocks are available up to 9 functions and can be operated electronically or manually. They will also support Spring Assisted Cylinders. Primary use is for, but not limited to, Doors, Gear, Brakes, Speed Brakes, and Canopy. All Valve Blocks will come with 2MM and 3MM fittings for airline.
$539.00
My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085
Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$1,499.90
My Hobby HT-45 by HSDJETS Foam Turbine Blue Navy Colors KIT
**Does Include Correct Tail Marking Decals**
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors KIT
SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel) (required & not included)
Battery Charger LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pc
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x2 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs
REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)
Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$689.90
NACA Inlets For summer operation.
NACA Inlets For summer operation. Adding these NACA flush cooling air inlets to an EVF powered jet will reduce the end-of-the-flight temperatures (motor/batteries) by 8-10°F compared to a non ventilated installation. The inlet design allows the cooling air to enter the fuselage with very little drag losses. The inlets can be added to a finished model.
$18.95
