BVM F-18 5.5 Tail Cone - Single Engine
Formers Included
$69.99A Few Problems - EZ Fix
No models have crashed!
But, some owners choose to use more power than the recommended 140 Neuton engine, and sometimes hot shot pilots apply excessive "G's". And then, some use the primary former Arch Brace as a "handle" to lift the model. Others just tumbled after a real bad landing. Whatever the cause of fracturing this stress carry through "Arch Brace" is, it is easily made stronger with this option from BVM.
$44.50Fuel Fill Valve set is a "Twist-Locking" system to fuel your aircraft. The valve spring seals when not being filled. The fuel cap adds additional protection from dirt and debris. Complete set includes - 1 Fueler Check Valve, 1 Fuel Probe, and 1 Fuel Cap
$28.99BVM Fuel Probe attaches to your fuel pump. This "Twist-Locks" into the fuel fill valve while fueling to create a leak proof seal.
$11.99
*BVM recommends removing pump battery BEFORE charging.
$259.006.3MM DIAMETER
43MM LENGTH
10MM HEAD
Can be used with: BVM YAK 1:4, BVM F-18 1:7.75, Older version L-39
$12.956MM DIAMETER
47MM LENGTH
9MM HEAD
Can be used with: BVM newer version L-39, Renegade, BVM newer version F-100
$12.956.3MM DIAMETER
47.6MM LENGTH
8MM HEAD
Can be used with: Older version BVM F-100 GFG
$12.95
*BVM recommends removing pump battery BEFORE charging.
$259.00BVM Go Fly Overflow Tank Used with any aircraft that uses the BVM Flush Mount Fitting
$47.95Update your headware collection with this new BVM Snapback Trucker Hat. These Richardson Trucker Hats are known for its quality and fit.
Six-panel construction delivers the classic look and feel
Premium materials and craftsmanship ensure an ideal fit for all sizes
Standard cotton sweatband provides comfort for all-day wear
PRODUCT SPECIFICATIONS
STYLE: 6 Panel
PROFILE: Mid Pro
BILL: Precurved
SWEATBAND: Standard
FABRIC: Cotton-Polyester Twill/Trucker Mesh
COMPOSITION:
Front: 60% Cotton/40% Polyester
Back: 100% Polyester
CLOSURE: Snapback
This Gyro Isolation Box is designed to help dampen harmonic sounds created by turbines that could cause the gyro to act up. Detailed assembly instructions are provided.
$15.99BVM Jet-Foam Cradle for BVM L-39 1/5th Scale Made in the U.S.A. with BVM Jet-Foam The Jet-Foam Cradle will not scratch or dent your model, but gently hold and "cradle" it while you are working on it in your shop or assembling / disassembling it at the flying field. The Velcro straps are handy for some modeling tasks such as installing the wings and transporting the model in a van or trailer.
$155.00Update your headware collection with this new BVM Snapback Trucker Hat. These Richardson Trucker Hats are known for its quality and fit.
Six-panel construction delivers the classic look and feel
Premium materials and craftsmanship ensure an ideal fit for all sizes
Standard cotton sweatband provides comfort for all-day wear
PRODUCT SPECIFICATIONS
STYLE: 6 Panel
PROFILE: Mid Pro
BILL: Precurved
SWEATBAND: Standard
FABRIC: Cotton-Polyester Twill/Trucker Mesh
COMPOSITION:
Front: 60% Cotton/40% Polyester
Back: 100% Polyester
CLOSURE: Snapback
BVM Oxford LongSleeve - Small size with BVM Jets embordery
Teflon™ tough, this stylish shirt is made from a 65% polyester/35% cotton blend and is treated with Teflon™ fabric protector for stain resistance. It features a soft-touch finish, wrinkle resistance, a button-down collar, a double-back yoke, two side back pleats, a patch pocket with pencil compartment and bone-horn buttons.
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$35.00This 3D printed Pitot Tube Mount can be used with a JetCat (or similar) Air Speed Sensors. Mount the airfoiled end to the fuselage such that the Pitot Tube is pointed to the front end of the model and close to parallel to the longitudinal axis. For accuracy, it is necessary that the Pitot Tube is at least 1/2" away from fuselage skin to not be affected by boundary layer flow. The plywood plate and screws allow attaching it to the fuselage skin. The fairing can be primed and painted to suit your needs.
$31.95This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99This new BVM Polo is moisture wicking, has snag protection, and is UV protected. Also, it has a smooth soft feel. Features 6.6 oz./yd / 225 gsm, 100% polyester jersey Snag protection plus Moisture-wicking Antimicrobial performance UV protection Matching flat knit collar Side vents 3-button placket with dyed-to-match buttons Industrial Laundry Tested to 75 washes
$59.99BVM Series Power Plug 2 used with 10S 2 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$33.99BVM Series Power Plug 3 used with 12S or 14S 3 Male Input and 1 Male Output Less Restrictive, Runs Cooler and Handles More Current Tested over 130 AMP's BVM is constantly looking at new ways to improve products to better serve our customers. We have been testing these new Series Power Plugs for sometime now. The new Series Plugs handle higher currents better. They are larger in size and have larger contacting surfaces. Another benefit to the new plug is the ability to offer an Anti-Spark Plug to our ESC's on the 10S and 12S EVF units. Our new 14S EVF unit already has Anti-Spark in the ESC. These New Series Plugs are Male Inputs with Male Outputs. The BVM EVF system has a Female Plug already installed on it. This is done because we have an Anti-Spark Female Plug and a Non Anti-Spark Female Plug. 10S and 12S Versions will have the Anti-Spark Female Plug. The 14S Versions will have the Non Anti-Spark Female Plug since the ESC already has it built in. Anti-Spark Plugs are not rated above 50V use.
$38.99Gildan G64000 is 100% ring spun cotton with blends of softness and durability.
Color: Dark Heather Grey
65 % polywester / 35 % Cotton
Gildan G64000 is 100% ring spun cotton with blends of softness and durability.
Color: Dark Heather Grey
65 % polywester / 35 % Cotton
Gildan G64000 is 100% ring spun cotton with blends of softness and durability.
Color: Dark Heather Grey
65 % polywester / 35 % Cotton
Gildan G64000 is 100% ring spun cotton with blends of softness and durability.
Color: Dark Heather Grey
65 % polywester / 35 % Cotton
Gildan G64000 is 100% ring spun cotton with blends of softness and durability.
Color: Dark Heather Grey
65 % polywester / 35 % Cotton
Gildan Softstyle®
4.5 oz/yd² | 100% Ring Spun Cotton
Gildan Softstyle®
4.5 oz/yd² | 100% Ring Spun Cotton