Gildan Softstyle®
4.5 oz/yd² | 100% Ring Spun Cotton
Gildan Softstyle®
4.5 oz/yd² | 100% Ring Spun Cotton
Gildan Softstyle®
4.5 oz/yd² | 100% Ring Spun Cotton
Hanes F260 Ultimate Cotton ® - Crewneck Sweatshirt
85% cotton, 15% poly
Low pill, high-stitch density PrintPro® XP fabric with 100% cotton face
Double-needle cover seamed neck, armholes and waistband
Cotton/polyester/spandex neck, cuffs and relaxed waistband for ultimate comfort
Size Chart
Small – 21 Body Width, 28 Full Body Length, 24 Sleeve Length
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$35.00Medium
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
4-X
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
XX-Large
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
XXX-Large
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
BVM T-Shirt Blue - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM T-Shirt Heather Grey - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00Large
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
BVM T-Shirt Pink - SMALL
Gildan 100% Cotton
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00BVM T-Shirt Tan - SMALL
Gildan 50% Cotton / 50% Polyester
**BRAND NEW - IN ORIGINAL PACKAGE. JUST CLEARING OUT OLD INVENTORY**
$25.00X-Large
GILDAN 50% preshrunk cotton, 50% polyester T-Shirt
DryBlend fabric wicks moisture away from the body
double-needle stitching throughout
seamless collar
taped shoulder-to-shoulder
BVM Tool Organizer with Screw Tray helps you organize your messy workbench, perfectly arrange all the tools, get rid of the messy toolbox, and keep your tools neatly organized. Whether you're simply storing tools on this holder, using it as a convenient grab-and-go system, or want to keep your tools conveniently organized and in reach on the job, this holder has you covered. With all necessary hardware provided, simple and practical design makes it easy to assemble. ITEM SPECIFICATIONS: This CNC Aluminum Tool Organizer has up to 18 holes and will sit on any surface. The large holes will hold a wide variety of screwdriver sizes in place. If you have any questions about this product, please do not hesitate to contact us, our team is always here to provide you with service. **ASSEMBLY REQUIRED** **TOOLS NOT INCLUDED**
$23.99For all of your
component installation requirements such as: batteries, receiver,
gyro safety strap,
fuel tanks, U.A.T., etc.
"All In One Package"
$49.95Update your headware collection with this new BVM Snapback Trucker Hat. These Richardson Trucker Hats are known for its quality and fit.
Six-panel construction delivers the classic look and feel
Premium materials and craftsmanship ensure an ideal fit for all sizes
Standard cotton sweatband provides comfort for all-day wear
PRODUCT SPECIFICATIONS
STYLE: 6 Panel
PROFILE: Mid Pro
BILL: Precurved
SWEATBAND: Standard
FABRIC: Cotton-Polyester Twill/Trucker Mesh
COMPOSITION:
Front: 60% Cotton/40% Polyester
Back: 100% Polyester
CLOSURE: Snapback
Machine cut from .015" Poly Ply These shims can be used to reinforce the fiberglass flanges on the hatch shelf. If the slot is a bit oversize, position the shim for the best hatch-to-fuse fit and then glue (Zap-A-Gap) it under the flange. Of course, scuff the mating surfaces with #80 grit sandpaper for best adhesion. Make final adjustments with a small PermaGrit flat file. Perfect the Canopy Hook-to-slot fit one at a time.
$6.95Carbide Cutters (set of 5) We discovered some really great motor tool cutters that will really speed up your model building chores. These carbide cutters feature a drill point end with a fine tooth, high helix design cutting edge that really eats through plywood, fiberglass or carbon fiber. Each pack contains (2) 1/16", (2) 3/32", and (1) 1/8" diameter cutters all with a 1/8" shank to fit your motor tool. Once you try them, you'll never want to be without them and you can't beat the price! As always wear safety glasses when working with rotary cutters of any kind.
$28.95Carbon Fiber BobCat Composite Main Gear Flex Arms - pr
$45.00Carbon Fiber Flex Mounts and Doubler for a F-80/T-33
$48.95Carbon Mat 8 1/2" X 22" 1/2 oz/sq. ft. 2 sheets
$14.75The CCU monitors, controls, and displays functions within your airframe. Control Features: High Voltage Compatible (8.4 Volts) Landing Gear Lights Brakes Landing Gear Failsafe, on the ground (in case LG Switch is backwards) Landing Gear Altitude Trigger Manual Gear Retracting Operation - No TX needed (depending on RX) Air Pressure Loss Failsafe Gear Door Sequencer - 3 Types System Voltage Display Large Air Pressure Display Automatic Light Controller Two Stage Brake Control Steering Servo Shutoff Command Centers Steering on Takeoff with Gear Up Command Anti Wheel Spin on Gear Up Command S-BUS compatible for Futaba users
$350.00Ceramic heat blanket is used to protect your model from excessive heat and is ideal for use in engine bays and near tailpipes. Package includes (1) 12"x24" sheet of Ceramic Heat Blanket.
$14.95Part of the Sabre jet turbine conversion kit are these new reinforcements for the main gear flex plates. Machined from laminated carbon fiber, they will add a great deal of strength and resistance to breaking of the flex plates while still allowing an appropriate amount of flexing during torturous landings. These retro fit parts can also be used with Mavericks, Ultra Viper and Aggressor III installations. These C.F. flex plates reinforcements are glued to the top side of the flex plates with Flex ZAP. Tap the predrilled holes #4-40 and install the 4-40 x 7/16" flat head screws that come with this upgrade kit.
$15.00CF Main Flex Plates - Electra, Sport, Maverick, Agg, Agg III, Viper, Ultra Viper, and Maverick Pro.
$19.95CF Main Flex Plates- Super Bandit & Balsa Bandit-pr
$34.95CF Nose Glear Flex Arms - F-86/AggII/Viper (early) (pair)
$8.00Classic Bandit Electric Tailpipe Thrust Tubes includes laser cut mylar, fittings, plastic tape, and instructions
Classic Bandit Kevlar Fuel Cells (2.4 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00Save your fingers! This new modeling tool makes rigging control systems easier, faster, less frustrating, and saves wear and tear on your fingers. Access into hard-to-reach areas are now much easier and you don't need a screw drivers that can slip and puncture the the adjacent surface.
For all #2-56 and #4-40 Metal Clevises
Replacement Fork Tips are available! Yes, if you accidently drop the pliers on a hard floor, the tips may break.
$32.95
Replacement Fork Tips with installation instructions. Clevis Pliers Replacement Tips available only to owners of the complete "Clevis Pliers" tool. Here's Why: BVM wants our products to be successful. There are instructions on how to use this precision tool that come with the complete Clevis Pliers package. The instructions are necessary for "success". Additionally, BVM makes an adjustment to the pliers to allow the Fork Tips to properly align.
$10.95CNC Carbon Fiber Nose Gear Flex Arms - Electra, F-16, Agg III, Viper, Maverick, Bandit, and Bobcat XL (pair) Will work with the F-80/T-33 with CF Aluminum Gear.
Cougar Clear Canopy, Windshield Disclosures: BVM prides itself in providing a quality product delivered to customers on time. Due to the popularity of certain products, we can not guarantee that each item you have ordered will be in stock. If any items you ordered are not in stock, BVM will inform you immediately. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.
$40.00Please specify the Length and Exit Diameter when you check out.