T-33 Tailpipe
Use these Syringes to neatly apply Aeropoxy, Vpoxy, and QT Poxy into hard to reach places such as formers inside a fuselage. They are also handy for applying a fine bead around fuel tank fittings.
$4.95Air powered retractable landing gear, oleo struts, valves and brake systems occasionally need maintenance. If you ever have to disassemble any of these systems to clean them, there will be a need to replace the O-ring lubricant. Parker Super O-Lube is what we use at the BVM factory for all of our O-ring lubrication. It is a high viscosity lubricant that will not clog filters or lines, just use it sparingly. Packaged in this convenient 1/2oz tube, it is perfect to keep in your flight box.
$12.50Super Bandit, F-86 Nose Gear Flex Arms-pr Will work with the F-80/T-33 AFS with Purple Gear.
$16.50Super Bandit Kevlar Fuel Cells (3.7 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$355.00BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 2 Purple Plugs
$6.99BVM's Small Wooden Push Tool assists in changing the BVM Solid Rubber Tires, 2-1/8" to 2-5/8".
After removing the old tire from the rim. Insert the cone tool into the axle bushing of the rim. Place the tire over the cone. Place the Wooden Push Tool over the tire. Slowly push straigth down, keeping fingers clear from the underside. For larger wheels, it may be nesessary to place the wheel on the floor and stand on the push tool.
$8.50These stainless steel socket head, self tapping cap screws (with built-in washer) are extremely handy for mounting servos and small parts in any model aircraft. #2 X 7/16" SSSH, 75 PACK
$7.95Scuff Boards 20pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
Scuff Boards 10pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
Safety Wire - for fuel and airline connections. This aircraft grade stainless steel safety wire has been tested by BVM and packaged for convenient shop and in-the-field use. .020 SS WIRE
$6.00Fighter Bombers of this era had underwing pylons to carry extra fuel to get them to the combat zone and engage in air-to-air or air-to-ground attacks. These highly detailed epoxy glass molded options allow you to fully adorn the Sabre Jet. This package requires assembly and paint.Â
$325.00Sabre Jet Decals sized to fit the BVM 60", 63", F-86 These are freshly made waterslide decals (set of 5 sheets) that utilize the latest techniques and materials. The quality is superb. This set of 5 sheets will authentically adorn your F-86.
$75.00The stock springs in all the BVM Go Fly Gold models are already a strong spring for each model.
BVM offers Upgrade Springs for customers that would like a stronger spring tension.
This is not required.
PACKAGE INCLUDES:
4 - 12MM X 30MM Spring
1 - 10MM X 38MM Spring
1 - Nylon Spacer
Red LED Light with heatsink DISCLAIMER - This product is to be used with BVM Go Fly Jets only. Not guaranteed to work with other lighting systems. LED Light maximum voltage when testing is 3.7 volts.
$19.99Rafale B-01 - Twin Engine with (2) U.A.T.'s (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$500.00Rafale B-01 - Single Engine (5.52 Liters) *Please Note fuel systems are manufactured per order. Please allow 2 weeks for processing.
$485.00Re-Formulated - QT Plus produces a bond that is almost as strong as BVM's Aeropoxy, but allows for quick assembly and field repairs. Set time is 4 - 5 minutes. Sometimes, it may be convenient to not use the mix nozzle. Just squeeze out a small amount of glue and blend the two streams of glue with a mix stick. Not for use with EPO Foams. If your gluing EPO Foam, there is a special glue for that application. Check out Foam-Tac made by Beacon Adhesives.
$18.95The BVM Pump Mount can be used to secure most standard turbine fuel pumps or smoke pumps. The plastic mounts are adhesive backed. Additional screws may be used to secure the mount to the surface. Two 8" zip ties are included. Two mounts per package.
$5.95Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$34.95Power Plugs EVF Battery Connectors Saves Soldering, Saves Weight, Improves Performance This BVM electric product is assembled in our Florida, USA facility using Dean's Ultra plugs. Power Plug 2 is for use with (2) Saddle CellsTM in series. Power Plug 3 is for use with (2) Saddle CellsTM and a Booster Pack. Your EVF will perform better with Power Plugs because of reduced resistance. We can measure the difference on our test stand. *Please Note, Power Plugs are manufactured per order. Please allow 2 weeks for processing.
$29.95Poly Ply assorted pack (1 sheet of each .010", .015" and .020")
Poly Ply .020" - 2pk
Poly Ply .015" - 2pk
Poly Ply .010" - 2pk
Pin Hole Filler 6oz
Philips Wrench Set 4pcs Titanium Coated Tips 4 Piece Set Includes: PHILIPS 3.0mm X 180mm PHILIPS 4.0mm X 180mm PHILIPS 5.0mm X 180mm PHILIPS 6.0mm X 180mm ** Please note this item is not personally engraved and will only have the BVM Logo and Tool Size.
$24.99ENGRAVED Philips Wrench Set 4pcs Titanium Coated Tips
~FREE PERSONALIZED ENGRAVING ON THE TOOLS~
Take the guess work out of who's tool it is. 4 Piece Set Includes: PHILIPS 3.0mm X 180mm PHILIPS 4.0mm X 180mm PHILIPS 5.0mm X 180mm PHILIPS 6.0mm X 180mm
** Please note that the personalized custom engraved tools are made per order and the turn around time frame is about 4 - 6 weeks.
$24.99The EVF "9er" units have a BVM purple anodized spinner. It looks real sporty and definitely identifies the product as "BVM". When the unit is installed in most jets, the spinner is not visible. Not so, with the all electric A-10.
$8.50Designed to be used with turbine powered models, this product from BVM protects from spilling fuel on the ground during the filling procedure and also to supply extra fuel for start-up.
The two large Buna O-Rings keep the tank from slipping off of your wing and protects from scratching its shiny surface.
These are very popular items at jet events so you may want to personalize yours for easy identification.
$37.95