Use For All Mechanical Mating Parts Metal To Metal - Metal To Plastic Its light viscosity allows it to penetrate quickly and lubricate from within. Its formulation of high quality waxes and PTFE promote friction free operation. Its liquid carrier evaporates and leaves the friction relieving chemistry. It guards against rust and corrosion and it does not attract dirt. Especially good for electronically driven retractable landing gear and mechanical moving parts of pneumatic gear. CAUTON: DO NOT apply to pneumatic cylinders.
$5.50Milled Fiber 4oz
To strengthen glue joints.
These 1/32" long fiberglass fibers will add strength to an epoxy glue joint. Milled fiber also thickens the glue mix so it will stay where you put it.
A combination of some milled fiber with microballoons and resin will also yield a stronger fillet material.
The 2mm airline system works well in the PNP jets. Applying the tubing to the small metal barbed fittings can be tedious and some breakage of the fittings has occurred.
The BVM Pump Mount can be used to secure most standard turbine fuel pumps or smoke pumps. The plastic mounts are adhesive backed. Additional screws may be used to secure the mount to the surface. Two 8" zip ties are included. Two mounts per package.
$5.95BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 1 Purple and 1 Silver Plug
$5.99Safety Wire - for fuel and airline connections. This aircraft grade stainless steel safety wire has been tested by BVM and packaged for convenient shop and in-the-field use. .020 SS WIRE
$6.002-1/4" Replacement Rubber Tire
NON-SOLID TIRE - Used with BVM Go Fly Gold Models: Viper, Bandit evo, eBandit evo
$6.25#2 X 3/16 Button Head Panel Screws 30pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.
$6.50Wheel Bushing Used On; F-16 1:5 Main Wheel, F-18 5.5 Main Wheel **BVM Wheels Need QTY 2 Bushings**
$6.50Scuff Boards 10pk
Much of the sanding work required to build our models today involves the proper "scuffing" of the wood and plastic parts in preparation for gluing.
These #80 grit double sided, flexible boards are perfect for the job of giving the parts "tooth" for the glue to grab onto.
Critical tasks such as installation of laser cut formers into a fiberglass fuselage are a great application for the Scuff Boards. They are just flexible enough to attack the molded fiberglass and stiff enough to clean off burned edges of the laser cut ply parts. You can trim the ends with shears to adapt to each task.
Once you have some Scuff Boards on your workbench, you will find many other uses for these very handy and inexpensive tools. We certainly have in the BVM prototype shop.
Machine cut from .015" Poly Ply These shims can be used to reinforce the fiberglass flanges on the hatch shelf. If the slot is a bit oversize, position the shim for the best hatch-to-fuse fit and then glue (Zap-A-Gap) it under the flange. Of course, scuff the mating surfaces with #80 grit sandpaper for best adhesion. Make final adjustments with a small PermaGrit flat file. Perfect the Canopy Hook-to-slot fit one at a time.
$6.95Fuel Line Spring Clips - 6MM 10 per package For: Standard Fuel Systems The 6mm clips can be used on most fittings except those inside the fuel tanks. Safety wire (BVM #2800) is used to secure the flexible tubing to those fittings. The standard size clips will secure the 6mm fuel tubing to 5/32” brass tubes as shown. Be cautious with the pliers to not pinch the clips more than necessary. Pull test the fuel lines to check for security after the clips are in place.
$6.95We got
tired of fixing wing tip scratches and faced up to reality - it's just going to
happen occasionally. So, if your landings are not always perfect, you may also
find a need for some truly tough wingtip skids.
BVM Aluminum Plugs fit our 6mm OD (4mm ID, 5/32") Line. These can be used for Smoke or Fuel Lines. The Aluminum Plug is used after fueling your aircraft. Now available in Purple and Silver to easily identify if it is a fuel or smoke line. Includes: 2 Purple Plugs
$6.993/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.
$7.50Velcro / White adhesive back 2 X 6; (2) This Hook n' Loop product has a very aggressive adhesive backing and very aggressive Hook n' Loop gripping power. Cut to size with sharp scissors. Apply the prickly side to a smooth Zap or painted surface and the fuzzy side to a battery or receiver.
$7.502:1 Plunger for use with the glue dispenser gun. This will work with Aeropoxy, Vpoxy, and QT Poxy Glue Cartridges.
$7.95Fuel Line Spring Clips - 8MM 10 per package For: Hi-Flow Fuel Systems The 8mm clips can be used on most fittings except those inside the fuel tanks. Safety wire (BVM #2800) is used to secure the flexible tubing to those fittings. Be cautious with the pliers to not pinch the clips more than necessary. Pull test the fuel lines to check for security after the clips are in place.
$7.95These stainless steel socket head, self tapping cap screws (with built-in washer) are extremely handy for mounting servos and small parts in any model aircraft. #2 X 7/16" SSSH, 75 PACK
$7.95