English
Categories
- PNP/Go Fly Accessories
- Kit Accessories
- HSD Jets
- PowerBox
- Carbon Fiber
- Air Systems
- Accessories
- Installation Organizers
- Building Materials
- Finishing Materials
- Adhesives
- Electric VioFan (EVF)
- Chargers / Power Supplies
- Electric Accessories
- Batteries
- Turbine Mounts & Straps
- Turbine Accessories
- Fuel Cells
- Fuel System Accessories
- Jersey Modeler
- Cockpits
- Lubricants
- PermaGrit
- Tools
- Radio Gear
- Pilots
- Landing Gear
- Wheels Tires and Brakes
- Jet Cases / Cradles
- Specials
- Apparel and Gifts
- Books
- Gift Certificates
- Penn Bags
Featured [more]
BVM Series Power Plug 2
BVM GFG Smoke System
19mm dia. Disc w/Arbor
Discs Small Cutting Disc 19mm dia complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Very controllable, cut a tight radius or straight. Tip:- Cut against the spin for greater accuracy & control. Fits Dremel, Proxxon, Flexi drives & hobby drills. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fibreglass, Perspex, PCB, plastics, woods and ceramics. RPM 5,000 - 20,000. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fibreglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.
$15.95
Flat Full Length Fine Grit
Hand Tool Flat hand file. Dims. 230 x 38mm thick 1.55mm. Useful to get into narrow places where the sanding block is unable to fit. Use to clean up slots, cut outs in former's and general sanding. They may not be perfectly flat, they don’t need to be, use the Perma-Grit sanding blocks which are. FINE grit is approx. equivalent to UK 320 / US 120 sandpaper. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Wedge Block
Sanding Block The Wedge Block is cut at an angle of 45° Dims. approx. 185 x 52 x 41mm. The wedge shape enables the user to see clearly where they are sanding, and to sand into tight corners without knocking your knuckles. Flat sanding surface, coarse grit one side, fine the other. When placed on their edge, you are able to sand a perfect right angle. Use to profile edges, feather edges, block sanding, square off materials or sand a perfect dihedral. The grits is bonded with industrial strength double sided tape to the custom made anodized aluminum extrusion, which is light, clean and easy to use and will never warp. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics etc. COARSE grit equivalent approx. UK 180 / US 60 FINE grit equivalent approx. UK 320 / US 120 DIY TIP:- The Wedge Block was designed by Tracey Richardson for sanding window frames, skirting boards, walls etc. No more sore fingers from using sandpaper.
$32.99
280mm x 51mm Block Coarse/Fine
Sanding Block Use to profile edges, feather edges, block sanding, square off materials or sand a perfect dihedral. When placed on their edge, you are able to sand a perfect right angle. Popular block that enables you to produce a perfect leading and trailing edge to your wings. Flat sanding surface, coarse grit one side, fine on the other. Dims approx 280 x 52 x 41mm (11") The steel gritted sheets are bonded with industrial double sided tape, to the custom made anodized aluminum extrusion, which is light, clean and easy to use and will never warp. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics etc. COARSE grit equivalent approx. UK 180 / US 60 FINE grit equivalent approx. UK 320 / US 120
$48.99
32mm dia. Disc w/Arbor
Discs Larger Cutting Disc 32mm diameter, complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Very controllable, cut a radius or straight. Tip:- Cut against the spin for greater accuracy & control. Fits Dremel, Proxxon, Flexi drives, hobby drills & Gerbil vacuum form trimmers. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fibreglass, Perspex, plastics, woods and ceramics. RPM 5,000 - 20,000. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fiberglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.
$17.50
Flat Full Length Coarse Grit
Hand Tool Coarse Flat hand file Coarse. Dims. 230 x 38mm thickness 1.6mm. Useful to get into narrow places where the sanding block is unable to fit. Use to clean up slots, cut outs in former's and general sanding. Use to deburr aluminum, and other jagged edges. Coarse grit equivalent to UK 180 / USA 60 grit sandpaper. For a longer and wider precision flat sander, try the Perma-Grit sanding blocks. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Round Needle File (Small)
Small Needle Files Small Needle File Round 140 mm. Tapering from 3.5 mm to a fine point (Rat Tail File). Gritted length 7.5cm. Overall length 140 mm approx. shaft 3 mm. Use with or without a Handle, fits the NFH Handle with 3 mm collet. Medium grit equivalent to UK 220 grit sandpaper.
$14.99
19mm & 32mm Discs w/Arbor
Discs Two Perma-Grit Cutting Discs with 1 arbor / shaft. Small 19mm dia and Larger 32mm dia complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Fits:- Dremel, Proxxon, Flexi drives, hobby drills and Gerbil vacuum form trimmers. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fiberglass, PCB, Perspex, plastics, woods and ceramics. RPM 5,000 - 20,000. Excellent on Perspex (Plexiglas) use below 10,000 RPM and they will not melt it unlike a diamond disc. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fiberglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.
$28.99
560mm x 51mm Block Coarse/Fine
sanding blocks Flat true, Sanding Block, also known as a Wing Block. Block length approx. 560 x 52 mm (22") Perfect for sanding leading and trailing edges, wing dihedrals. Block sand large areas. Neck dressing of guitars and other musical instruments. The block is extruded aluminum, which is then anodized so that is clean to work with. The block is light and easy to use. All of our flat blocks will sand a perfect 90 degree angle, when laid on their edge. The cutting face is Perma Grits tungsten carbide gritted sheets, which are held in place with industrial strength, very thin double sided tape. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc. COARSE grit is approx. equivalent to UK 180 / US 60 sandpaper FINE grit is approx. equivalent to UK 320 / US 120 sandpaper.
$73.99
Flat Needle File (Large)
Large Needle Files Large Needle File Hand or Flat. Gritted length 11.5cm. Overall approx. length 180mm, shaft 5mm. Kerf / cut slot width 9.5 x 2.5mm. Use with or without a Handle, fits the LNFH Handle with 5mm collet. Unlike conventional Needle Files, Perma-Grit cut in any direction and will cut Plastics, Woods, Fibreglass, Ceramics, Stone, Carbon fibre, PCB, Kevlar, Laminates, Polystyrene etc. Complex sanding in confined places. Medium grit equivalent to UK 220 grit sandpaper.
$16.99
Radius Coarse Grit External
Hand Tool Coarse Half Round 13 mm Radius File COARSE. Gritted on the external curve. Dims. 231 x 22 x 7 mm approx. Shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc. Radius external curve file. Coarse grit equivalent to UK 180 / USA 60 grit sandpaper. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
51mm x 280mm Full Length Fine
Flexible abrasive steel file / sheet FINE 280 x 51 mm (11" X 2"). Thin (average .5 mm .025"). Grit grade approximately UK 320 Grit. US 120 Grit. This sheet can be bent to any shape, internal or external. Mount to your own T Bar or sanding block. Mount on your bench, to make a flat bed sanding area. Place sheets side by side for a larger area. Complex curves can easily be fabricated. Cut using old scissors. Mount using glue or double sided tape. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Narrow Cone, Coarse
Small Rotary Rotary Narrow Cone Coarse Grit, drills own pilot hole. Make and enlarge holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 8mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
Round Needle File (Large)
Large Needle Files Large Needle File Half Round. Gritted length 11.5cm. Overall length 180mm, shaft 5 mm approx. Tapering from 9 mm to a point. Use with or without a Handle, fits the LNFH Handle with 5mm collet. Unlike conventional Needle Files, Perma-Grit cut in any direction and will cut Plastics, Woods, Fibreglass, Ceramics, Stone, Carbon fibre, PCB, Kevlar, Laminates, Polystyrene etc. Complex sanding in confined places. Medium grit equivalent to UK 220 grit sandpaper.
$16.99
Tangent Coarse Grit
Hand Tool Coarse Angle or Tangent hand file COARSE. Excellent anywhere there is a 90° angle needed. The R-201 is approximately 75, which gives the builder the accuracy needed to shape a 90° angle. Either an 1/8th radius or a sharp corner can be produced simply by rotating the tool. Model builders find this particularly useful for fabricating servo trays, it is also good for cleaning corners and edges on laser cut wood. Very popular and a good starting point if this is your first Perma Grit hand tool purchase. COARSE approximately to equivalent UK 180 / USA 60 sandpaper. Perma-Grit Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Narrow Cone, Fine
Small Rotary Small Rotary Narrow Cone Fine finishing Grit, drills own pilot hole. Make and enlarge holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 8mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
Round Coarse Grit
Hand Tool Coarse Round Tube File COARSE, 20mm diameter. Dims approx. 215 x 20 x 20mm. Shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, grooves and all concave curves. Use to shape or enlarge holes or arches etc. Shape cowlings, nose cones, wheel spats etc. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$15.99
Set of 5 Including Handle
Small Needle Files Fine Set of 5 Small Needle Files Fine Grit 140 mm overall length. Gritted length 7.5cm. Set includes Hand (Flat), Square, Triangle (3 square), Half Round and Round File. Unlike conventional Needle Files Fine Grit Perma Grit files cut in any direction, and will cut Plastics, Plywood, Balsa, GRP, Carbon fibre. Perfect for small detail work in confined areas, robust long life files. Use with or without a Handle, fits the LNFH Handle with 5mm collet. Unlike conventional Needle Files Fine Grit, they cut in any direction and will cut Plastics, Woods, Fibreglass, Ceramics, Stone, Carbon fibre, PCB, Kevlar, Laminates, Polystyrene etc. Complex sanding in confined places. FINE grit is approx. equivalent to UK 320 / US 120 sandpaper.
$62.99
3mm (1/8") Spar Slotter Fine
Spar Slotters Spar Slotter, FINE Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 320 US 120 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Finish laser cut plywood. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$12.99
Large Set of 5
Large Needle Files Set of 5 Large Needle Files 18 cm. Contains:- Hand (Flat), Half Round, Round, Triangle (3 Square) and Square Overall length of each file 180 mm, shaft 5 mm approx. Gritted length 11.5 cm. Use with or without a Handle, fits the LNFH Handle with 5mm collet. Unlike conventional Needle Files, they cut in any direction and will cut Plastics, Woods, Fibreglass, Ceramics, Stone, Carbon fibre, PCB, Kevlar, Laminates, Polystyrene etc. Complex sanding in confined places.
$66.99
Wide Cone, Coarse
Small Rotary Rotary Wide Cone Coarse Grit, drills own pilot hole. Make and enlarge holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 16mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
3mm (1/8") Spar Slotter Coarse
Spar Slotters Spar Slotter, Coarse Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 180 US 60 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$12.99
6mm Dia. Dowel, Coarse Grit
Hand Tool Round File 7mm, COARSE. Dims approx. 235 x 7 x 7 mm. Tungsten carbide abrasive gritted length approx. 110 mm. Red plastic Comfy grip handle. Use to shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc. Coarse grit equivalent to UK 180 / USA 60 grit sandpaper. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Wide Cone, Fine
Small Rotary Rotary Wide Cone Fine finishing Grit, use to smooth joints and edges. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 16mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
6mm (1/4") Spar Slotter Coarse
Spar Slotters Spar Slotter, Coarse Grit, 6 mm (1/4"). Dims 150 x 12 x 6 mm. Grit equivalent UK 180 US 60 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$13.99
6mm dia. Dowel, Fine Grit
Hand Tool Fine Round File 6.5 mm, FINE. Dims approx. 235 x 6.5 x 6.5 mm. Tungsten carbide abrasive gritted length approx. 110 mm. Red plastic Comfy grip handle. Use to shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc. FINE grit equivalent to UK 320 / US 120 Sandpaper.
$14.99
Drum, Coarse
Small Rotary Rotary Drum Coarse, cuts on the end face as well as the sides, perfect to make wheel wheels in Polystyrene or blue foam and smooth out hollows leaving a perfectly straight edge. Make and enlarge holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 17mm Widest point 11mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
Complete Set in Wallet Fine Grit
Hand Tools Fine Set of 8 Hand Tools FINE, in a Perma-Grit branded Red Canvas Tool Roll, Velcro fastening. Contains:- F101 Flat File, R101 internal grit 13mm Radius File, R200F external grit 13mm Radius File, R201F Angle 75 degree File, R202F 19.5mm Round tube File, R203F 13mm Round tube File, R204F Round 6.5mm File, S204F Square 6.5mm File The Fine set of Perma-Grit's abrasive tools cut, sand and shape in any direction. They outlast sandpaper thousands of times and can be used to finish all the materials, listed below and more. If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed. Simple tools to use, tough and will give far better results. "When the going gets tough, get Perma-Grit" Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc. FINE grit is approx. equivalent to UK 320 / US 120 sandpaper.
$103.99
Drum, Fine
Small Rotary Rotary Drum FINE finishing Grit, cuts on the end face, make and smooth out hollows. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 11mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
Complete Set in Wallet Coarse Grit
Hand Tools Coarse Set of 8 Hand Tools COARSE, in a Red Canvas Tool Roll, velcro fastening. Contains:- F102 Flat File, R102 internal grit 13mm Radius File, R200C external grit 13mm Radius File, R201C 75 degree Angle File, R202C 20mm Tube File, R203C 14mm Tube File, R204C Round 7mm File, S204C Square 7mm File A popular kit Perma-Grit's abrasive tools cut, sand and shape in any direction. They outlast sandpaper thousands of times and can be used all the materials, listed below and more. If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed. Simple tools to use, tough and will give far better results. "When the going gets tough, get Perma-Grit" COARSE grit is approx. equivalent to UK 180 / US 60 sandpaper. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$103.99
Pancake, Coarse
Small Rotary Rotary Pancake Coarse Grit 20 mm, cuts on the end face, make and smooth out hollows. Shaft / arbor 3.1 mm (1/8") Overall length 30mm Gritted length 6mm Widest point 20mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
6mm Square, Coarse Grit
Hand Tool Coarse Square tungsten carbide grit File 7mm Coarse. Red plastic Comfy grip handle. Dims. approx. 230 x 7 x 7mm. Gritted length 110mm. Enlarge or shape holes fabricate Mini Servo trays. Cut in any direction and virtually any material, the same as all of our tools! COARSE grit is equivalent to UK180 / US 60 sandpaper. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.
$14.99
Pancake, Fine
Small Rotary Rotary Pancake Fine finishing Grit, cuts on the end face, make and smooth out hollows. Shaft / arbor 3.1 mm (1/8") Overall length 30mm Gritted length 6mm Widest point 20mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
6mm Square, Fine Grit
Hand Tool Square tungsten carbide grit File 6.5mm Coarse. Red plastic Comfy grip handle. Dims. approx. 230 x 6.5 x 6.5mm. Gritted length 110mm. Enlarge or shape holes fabricate Mini Servo trays. Cut in any direction and virtually any material, the same as all of our tools! Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc. FINE grit is equivalent to UK320 / US 120 sandpaper.
$14.99
Domehead, Coarse
Small Rotary Rotary Domehead Coarse Grit, parallel sides, enlarge and clean holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 17mm Widest point 7mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
Domehead, Fine
Small Rotary Rotary Domehead Fine finishing Grit, parallel sides, enlarge and clean holes. Shaft / arbor 3.1 mm (1/8") Overall length 40mm Gritted length 16.5mm Widest point 7mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
1/8" dia. Rod, Coarse
Small Rotary Rotary Rod Coarse, drills its own pilot hole, rapidly cut out shapes, in any direction. Shaft / arbor 3.1 mm (1/8") Overall length 46mm Gritted length 22mm Widest point 4mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99
1/8" dia. Rod, Fine
Small Rotary Rotary Rod Fine finishing Grit, finish shapes and work thin, fine materials. Shaft / arbor 3.1 mm (1/8") Overall length 45mm Gritted length 21.5mm Widest point 4mm (all measurements are approximate) The FINE ROTARIES enables the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges. Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution. "Lubricate with WD40 oil or chalk if using on aluminum to reduce loading” (not recommended for use on metal)
$18.99
10mm dia. Ball Coarse Grit
Small Rotary Rotary Ball Coarse Grit, shaping, keying and lightening. Shaft / arbor 3.1 mm (1/8") Overall length 34mm Gritted length 10.5mm Widest point 10mm (all measurements are approximate) Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc. Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal) Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low - Medium. SAFETY:- Always wear protective goggles when using Rotary Tools. IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
$18.99