HSD Jets : ShopBVMJets.com, your one stop jet shop!

HSDJETS HF-16 V2.1 Foam Turbine Red white blue Colors PNP

SPECIFICATIONS:
Wingspan: 1344mm (52.9in)
Length: 1809mm (71.2in)
Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene)
Turbine Engine: 6-8KG brushless (required & not included)
Cruising speed: 150-200 km/h
Flying time: 3-5 mins
Wing area: 47.6 dm2
Wing load: 178.6 g/dm2
Main material: 20 times the import of aeromodelling EPO
Painting surface: Matte environmental water-borne paint + decal
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40
Radio System: 6 channel (required & not included)
Control System: MFC-2085

Servos (All 7.4V High voltage)
40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward)
25gx2 Metal gear with 150mm lead (left & right Aileron forward)
25gx1 Metal gear with 230mm lead (Rudder forward)
12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward)
12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward)
12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward)
12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward)
Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm)
CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing
Landing Gears All-metal simulation electronic retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Nosex1
Cockpit canopyx1
Vertical Stabilizerx1
Left Horizontal tailx1
Right Horizontal tailx1
L/R Auxiliary tankx1
L/R wingtip missilex1
L/R wingtip missile pylonx1
L/R No.1 missilex1
L/R No.2 missilex1
L/R tail finsx1
Main wing carbon tube L=400mm external diameter 10mmx2
Accessories Bag x1
Fuselage antenna x1
Pitotx1
Screw (HA3x14mm)x10 (Nose & Engine)
Screw (HM3x6mm)x2 (Horizontal tail)
Screw (HA3x10mm)x8 (Tail nozzle & Vertical)
Screw (KA3x16mm)x8 (Missile)
Screw (KA3x20mm)x8 (Missile)
Screw (KM3x60mm)x8 (Auxiliary tank)
Screw (HM3x10mm)x8 (Main wing)
HF-16 V2 Manualx1
MFC-2085 Manualx1

REQUIRES:
SW 6-8KG brushless (required & not included)
6 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,569.90

Add to Cart

HSDJETS HF-86 Foam Turbine Sky Blazer Colors PNP

SPECIFICATIONS:

Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 7KG-10KG (required & not included)
Cruising speed 160-180 km/h
Flying time 6-8 mins (full throttle)
Wing area 64.34 dm2
Wing load 163.2 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085

Servos
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward)
7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward)
7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward)

Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch)
CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
Horizontal tailx1 pcs
Left auxiliary tankx1 pcs
Right auxiliary tankx1 pcs
Main wing carbon tube L=598mm external diameter 16mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA4x45mm)x4 pcs (Horizontal tail)
Screw (HM4x20mm)x4 pcs (Wing)
Screw (HM4x16mm)x4 pcs (Wing)
Screw (HA3x10mm)x16 pcs (Vertical tail / Nose)
Screw (HA3x14mm)x8 pcs (Engine)
Screw (HM4x60mm)x4 pcs (Nose)
Screw (HM4x70mm)x8 pcs (Auxiliary tank)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Manualx1 pcs

REQUIRES:
7KG-10KG turbine engine (required & not included)
8 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,669.90

Add to Cart

HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors KIT

SPECIFICATIONS: Wingspan 1720 mm (67.7 in) Length 1715 mm (67.5 in) Weight --- Turbine Engine 8KG-12KG (required & not included) Cruising speed --- Flying time --- Wing area 64.34 dm2 Wing load --- Main material 20 times EPO Painting surface Matte environmental water-borne paint + decal Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only) Suitable for ambient temperature 0C-40C Radio System 8 channel (required & not included) Control System MFC-2085 (required & not included) Servos (required & not included) 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) Ailerons Yes Flaps Yes Elevator (Horizontal tail) Yes Rudder (Vertical tail) Yes The smoke system No LED lights system Selective configuration (not included) Electromagnetic brake system Selective configuration (not included) Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch) CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included) Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 pcs Left main wingx1 pcs Right main wingx1 pcs Nosex1 pcs Cockpitx1 pcs Vertical tailx1 pcs Horizontal tailx1 pcs Left auxiliary tankx1 pcs Right auxiliary tankx1 pcs Main wing carbon tube L=598mm external diameter 16mmx1 pcs Accessories Bag 1 x1 pcs Screw (HA4x45mm)x4 pcs (Horizontal tail) Screw (HM4x20mm)x4 pcs (Wing) Screw (HM4x16mm)x4 pcs (Wing) Screw (HA3x10mm)x16 pcs (Vertical tail / Nose) Screw (HA3x14mm)x8 pcs (Engine) Screw (HM4x60mm)x4 pcs (Nose) Screw (HM4x70mm)x8 pcs (Auxiliary tank) Accessories Bag 2 x1 pcs 100mm signal line (JR male+JR male)x8 pcs Manualx1 pcs REQUIRES: 8KG-12KG turbine engine (required & not included) 8 channel radio system (radio & receiver) (required & not included) 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included) LiPo battery charger (required & not included) Servos 7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward) 7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward) 7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward) 7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward) 7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) 7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward) Metal electric retractable hydraulic landing gearx3 (required & not included)

$799.90

Add to Cart

HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors PNP

SPECIFICATIONS:

Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 7KG-10KG (required & not included)
Cruising speed 160-180 km/h
Flying time 6-8 mins (full throttle)
Wing area 64.34 dm2
Wing load 163.2 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085

Servos
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Flapx2 forward)
7.4V 25gx3 Metal gear with 190mm lead (Elevatorx2 & rudderx1 forward)
7.4V 25gx1 Metal gear with 230mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 380mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Speed brake forward)

Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/52x21.7x17.3(inch)
CG (Center of Gravity) 300-305 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
Horizontal tailx1 pcs
Left auxiliary tankx1 pcs
Right auxiliary tankx1 pcs
Main wing carbon tube L=598mm external diameter 16mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA4x45mm)x4 pcs (Horizontal tail)
Screw (HM4x20mm)x4 pcs (Wing)
Screw (HM4x16mm)x4 pcs (Wing)
Screw (HA3x10mm)x16 pcs (Vertical tail / Nose)
Screw (HA3x14mm)x8 pcs (Engine)
Screw (HM4x60mm)x4 pcs (Nose)
Screw (HM4x70mm)x8 pcs (Auxiliary tank)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Manualx1 pcs

REQUIRES:
7KG-10KG turbine engine (required & not included)
8 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,669.90

Add to Cart

HSDJETS HJ-10 Foam Turbine Black PNP with Vectoring nozzle

SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Flying Weight 10.5kg (23.1 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG-12KG (required & not included)
Cruising speed 160-180 km/h
Flying time 4-6 mins (full throttle)
Wing area 64 dm2
Wing load 164.1 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085

Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Vectoring nozzle Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60x21.3x14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,500.00

Add to Cart

HSDJETS HJ-10 Foam Turbine CAF NEW (DARK BLUE) Colors KIT

SPECIFICATIONS:
Wingspan 1300 mm (51.2 in)
Length 2115 mm (83.3 in)
Weight ---
Turbine Engine 8KG-12KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 64 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 10 channel (required & not included)
Control System MFC-2085 (required & not included)

Servos (required & not included)
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Canard wing Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Vectoring nozzle Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/60 21.3 14.8(inch)
CG (Center of Gravity) 238-242 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Canard wingx1 pcs
Air inletx1 pcs
Caudal finx1 pcs
1# Main wing carbon tube L=520mm external diameter 16mmx1 pcs
2# Main wing carbon tube L=540mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA3x10mm)x6 pcs (Horizontal tail)
Screw (HM3x65mm)x2 pcs (Wing)
Screw (HM4x45mm)x4 pcs (Wing)
Screw (HM3x6mm)x4 pcs (Vertical tail / Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Servos
7.4V 40gx1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25gx2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 80mm lead (Elevatorx2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 25gx2 Metal gear with 80mm lead (Vectoring nozzlex2 forward)
7.4V 12gx1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$899.90

Add to Cart

HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors PNP

SPECIFICATIONS:
Wingspan: 1245mm (49in)
Length: 1809mm (71.2in)
Flying Weight: 6.1kg (13.4 lb) w/ 12s
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 47 dm2
Wing load: 129.8 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature: 0-4?
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
Control System: MFC-2085

Servos
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360degree lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAhx 2,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /145.6x51.8x33.7(cm)
CG (Center of Gravity) 178mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=715mm diameter=10mm
White Stickerx1
Accessories Bag 1 x1
Nylon airspeed tubex1
Nylon antennax1
Pull rod(1.5×52mm)x1(Fit the chuck)
Nylon rudder anglex3
Nylon rudder angle gasketx3
Screw (PM3x10mm)x4 (Wing)
Screw (PA3x10mm)x4 (Vertical Stabilizer)
Screw (PA2x12mm)x3
Screw (PA3x15mm)x1 (Nose)
Long rocker armx1
Nylon chuckx2
Manualx1

REQUIRES:
6 channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
6Sx2 LiPo battery charger

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,299.90

Add to Cart

HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors KIT

SPECIFICATIONS:
Wingspan:1245mm (49in)
Length:1809mm (71.2in)
Weight: 3.1kg (6.82 lb) (for reference only )
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless (required & not included)
Number of EDF Blade: 11 blades (required & not included)
Cruising speed: about 180 km/h (For reference only )
Flying time: about 3-5 mins (For reference only )
Wing area: 47 dm2
Wing load: 129.8 g/dm2 (For reference only )
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150 (required & not included)
Control System: MFC-2085 (required & not included)

Servos: (required & not included)
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360 lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
General landing gear control system: No
LED lights system: No
Electromagnetic brake system: No
Reinforced gyro selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/145.6x51.8x33.7(cm)
CG (Center of Gravity): 178mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=320mm diameter=10mmx2
White Stickerx1
Accessories Bag 1 x1
Horizontal steel wire rod(3x88mm)x2 (Horizontal Stabilizer)
Aileron steel wire rod(1.8x88mm)x2 (Aileron)
Wing lampshadex2
Fuselage lampshadex6
Vertical Stabilizer lampshadex2
Nylon cable tiesx5
Screw (PWA2x8mm)x8 (Control box)
Steering steel wire(1.5x35mm)x1 (Nose landing gear)
Wire rod steel wire(1.8x60mm)x1 (Vertical Stabilizer)
Wire rod steel wire(1.7x65mm)x1 (Nose wheel locking servo)
Wire rod steel wire(1.7x65mm)x1 (Left wheel locking servo)
Wire rod steel wire(1.2x41mm)x2 (Main wheel Cover)
Wire rod steel wire(1.2x41mm)x1 (Nose wheel Cover)
Screw (PM2.5x6mm)x1 (Main wheel Cover)
Screw (PM2.5x10mm)x1 (Main wheel Cover)
Wire rod steel wire(1.7x80mm)x1 (Right wheel locking servo)
Screw (PM3x12mm)x4 (Horizontal Stabilizer rod fixation with self-locking nut)
Screw (PM2x10mm)x6 (Wing/vertical Stabilizer rod fixation with self-locking nut)
Accessories Bag 2 x1
Screw (HM3x6mm)x2 (Horizontal Stabilizer)
Screw (HA3x10mm)x4 (Tail nozzle)
Screw (HM3x10mm)x4 (Wing)
Screw (HA3x8mm)x4 (Vertical Stabilizer)
Screw (HA3x14mm)x5 (Nose 1,Engine 4)
Accessories Bag 3 x1
Screw (HM3x10mm)x4 (Wing Spare)
Screw (HA3x14mm)x5 (Nose 1,Engine 4 Spare)
Screw (HA3x8mm)x4 (Vertical Stabilizer Spare)
Screw (HA3x10mm)x4 (Tail nozzle Spare)
Accessories Bag 4 x1
Nylon rocker arm of the servo x2 (Spare)
Nylon antennax1
Nylon airspeed tubex1
Manualx1

REQUIRES:
6+ channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (MFC-2085)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (S-EDF)
LiPo battery charger
Landing gear
Servos
S-EDF 105mm 4270/750KV brushless motor
MFC-2085 Control System
All wire
ESC 160A/12S Hobbywing AS150

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$650.00

Add to Cart

HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors PNP

SPECIFICATIONS:
Wingspan: 1245mm (49in)
Length: 1809mm (71.2in)
Flying Weight: 6.1kg (13.4 lb) w/ 12s
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 47 dm2
Wing load: 129.8 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature: 0-4?
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
Control System: MFC-2085

Servos
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360degree lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAhx 2,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /145.6x51.8x33.7(cm)
CG (Center of Gravity) 178mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=715mm diameter=10mm
White Stickerx1
Accessories Bag 1 x1
Nylon airspeed tubex1
Nylon antennax1
Pull rod(1.5×52mm)x1(Fit the chuck)
Nylon rudder anglex3
Nylon rudder angle gasketx3
Screw (PM3x10mm)x4 (Wing)
Screw (PA3x10mm)x4 (Vertical Stabilizer)
Screw (PA2x12mm)x3
Screw (PA3x15mm)x1 (Nose)
Long rocker armx1
Nylon chuckx2
Manualx1

REQUIRES:
6 channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
6Sx2 LiPo battery charger

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,299.90

Add to Cart

HSDJETS S-EDF90mm HBY-747 KLM Colors KIT

SPECIFICATIONS:
Wingspan 2800 mm (110.24 in)
Length 3000 mm (118.11 in)
Flying Weight ---
Flying time ---
Wing area 103.6 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ---
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
Control System MFC-2085 (required & not included)
Motor 3560-1550KV(Outer rotor)x4 pcs (required & not included)
EDF S-EDF 90mm 12 Bladex4 pcs (required & not included)
ESC 100Ax4 pcs (required & not included)

Servos (required & not included)
25gx4 Metal gear with 230mm lead (left & right ailerons forward)
25gx2 Metal gear with 80mm lead (left & right flap forward)
25gx1 Metal gear with 360mm lead (Vertical tail forward)
25gx2 Metal gear with 360mm lead (Elevator forward)
7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)

Recommended Power Battery 6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Not included
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging1 / Size Packing Box + Outer Box (Card mark)/1310x625x400(mm)
Packaging2 / Size Packing Box + Outer Box (Card mark)/1190x993x330(mm)
Packaging3 / Size Packing Box + Outer Box (Card mark)/705x405x643(mm)
CG (Center of Gravity) 470-475mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx5
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Nosex1 pcs
Mid fuselagex1 pcs
Fuselage tail endx1 pcs
Mid wingx1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Vertical tailx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Inboard engine setx2 pcs (w/o engine set)
Outboard engine setx2 pcs(w/o engine set)
Head pin carbon tube L=380mm external diameter 16mmx2 pcs
Body latch carbon tube L=680mm external diameter 16mmx2 pcs
Wing pin carbon tube 1 L=1380mm external diameter 16mmx2 pcs
Wing pin carbon tube 2 L=670mm external diameter 10mmx2 pcs
Horizontal pin carbon tube L=270mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x14mm)x8 pcs (Main wing?
Screw (HM3x35mm)x20 pcs (Engine set?
Screw (HM4x35mm)x2 pcs (Vertical tail?
Screw (HM4x50mm)x2 pcs (Vertical tail?
Screw (HM6x95mm)x14 pcs (Nose, fuselage, wing?
Screw (HM6x125mm)x4 pcs (Wing?
Screw (HM6x130mm)x4 pcs (Wing?
HBY-747 Manualx1 pcs
MFC-2085 Manualx1 pcs

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Control System:MFC-2085
Motor:3560-1550KV(Outer rotor)x4 pcs
EDF: S-EDF 90mm 12 Bladex4 pcs
ESC:100Ax4 pcs
Servos:25gx4 Metal gear with 230mm lead (left & right ailerons forward)/25gx2 Metal gear with 80mm lead (left & right flap forward)/25gx1 Metal gear with 360mm lead (Vertical tail forward)/25gx2 Metal gear with 360mm lead (Elevator forward)/7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)/7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)/7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)
LED lights system

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$2,399.90

Add to Cart

HSDJETS S-EDF90mm HBY-747 KLM Colors PNP

SPECIFICATIONS:
Wingspan 2800 mm (110.24 in)
Length 3000 mm (118.11 in)
Flying Weight 17kg (37.5 lb)
Flying time About 4-6 mins
Wing area 103.6 dm2
Wing load 164 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty 30 mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
Control System MFC-2085
Motor 3560-1550KV(Outer rotor)x4 pcs
EDF S-EDF 90mm 12 Bladex4 pcs
ESC 100Ax4 pcs

Servos
25gx4 Metal gear with 230mm lead (left & right ailerons forward)
25gx2 Metal gear with 80mm lead (left & right flap forward)
25gx1 Metal gear with 360mm lead (Vertical tail forward)
25gx2 Metal gear with 360mm lead (Elevator forward)
7.4V 12gx1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 380mm lead with protection function (Rear wheel cover plate forward)

Recommended Power Battery 6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging1 / Size Packing Box + Outer Box (Card mark)/1310x625x400(mm)
Packaging2 / Size Packing Box + Outer Box (Card mark)/1190x993x330(mm)
Packaging3 / Size Packing Box + Outer Box (Card mark)/705x405x643(mm)
CG (Center of Gravity) 470-475mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx5
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Nosex1 pcs
Mid fuselagex1 pcs
Fuselage tail endx1 pcs
Mid wingx1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Vertical tailx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Inboard engine setx2 pcs (w/o engine set)
Outboard engine setx2 pcs(w/o engine set)
Head pin carbon tube L=380mm external diameter 16mmx2 pcs
Body latch carbon tube L=680mm external diameter 16mmx2 pcs
Wing pin carbon tube 1 L=1380mm external diameter 16mmx2 pcs
Wing pin carbon tube 2 L=670mm external diameter 10mmx2 pcs
Horizontal pin carbon tube L=270mm external diameter 10mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x14mm)x8 pcs (Main wing?
Screw (HM3x35mm)x20 pcs (Engine set?
Screw (HM4x35mm)x2 pcs (Vertical tail?
Screw (HM4x50mm)x2 pcs (Vertical tail?
Screw (HM6x95mm)x14 pcs (Nose, fuselage, wing?
Screw (HM6x125mm)x4 pcs (Wing?
Screw (HM6x130mm)x4 pcs (Wing?
Accessories Bag 2 x1 pcs
100mm Signal Line (JR male + JR male) x8pcs
100mm High Precision Y-Line (JR Male + JR Male) x1pcs
HBY-747 Manualx1 pcs
MFC-2085 Manualx1 pcs

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAhx4pcs,LiPo with AS150 type plug (required & not included)
2S,7.4V,5200mAhx2pcs,LiPo with XT60 type plug (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$4,299.90

Add to Cart

My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors KIT

SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Weight ---
Turbine Engine 8KG (required & not included)
Cruising speed ---
Flying time ---
Wing area 47 dm2
Wing load ---
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085 (required & not included)

Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)

Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Selective configuration (not included)
Speed brake No
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Leading edge flap No
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear 3(Nose gear single wheel) (required not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line (JR male+JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG-12KG turbine engine (required & not included)
10 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)
Servos (required & not included)
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25g×2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Metal electric retractable hydraulic landing gearx3 (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$669.90

Add to Cart

My Hobby HT-45 by HSDJETS Foam Turbine Blue Navy Colors PNP

**Does Include Correct Tail Marking Decals**

SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085

Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,425.00

Add to Cart

My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors PNP

SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085

Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,425.00

Add to Cart

HSDJETS 1800mm SUPER VIPER FRP Turbine Navy Colors PNP

SPECIFICATIONS:
Wingspan 1800mm (70.87in)
Length 2000mm (78.74in)
Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil
Recommended engine thrust 10-12 kg / 20-26.4 (lb)
Cruising speed 260 km/h
Flying time 6-8 mins
Wing area 67.94 dm2
Wing load 174.57 g/dm2
Main material FRP
Painting surface Highlight environmental protection paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)

Servos
25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward)
25gx2 Metal gear with 90mm lead (Flap, forward)
25gx2 Metal gear with 90mm lead (Elevator, forward)
12gx1 Metal gear with 500mm lead (Nose wheel steering, forward)
12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward)

Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Smoking system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm)
CG (Center of Gravity) 180-185 mm leading edge of main wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing carbon tube L=850mm external diameter 20mmx1
Horizontal Stabilizer tube L=425mm external diameter 8mmx1
Accessories Bag 1 x1
Screw (HA3x14mm)x6 (Engine)
Oil tank overflow exhaust seat plugx1
Marking tapex1
100mm signal linex8
100mm High precision Y-linex1
Manualx1(Temporarily lacking)

REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included)
According to engine matching Power Batteryx1(required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$2,999.90

Add to Cart

HSDJETS 1800mm SUPER VIPER FRP Turbine Red Colors PNP

SPECIFICATIONS:
Wingspan 1800mm (70.87in)
Length 2000mm (78.74in)
Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil
Recommended engine thrust 10-12 kg / 20-26.4 (lb)
Cruising speed 260 km/h
Flying time 6-8 mins
Wing area 67.94 dm2
Wing load 174.57 g/dm2
Main material FRP
Painting surface Highlight environmental protection paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)

Servos
25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward)
25gx2 Metal gear with 90mm lead (Flap, forward)
25gx2 Metal gear with 90mm lead (Elevator, forward)
12gx1 Metal gear with 500mm lead (Nose wheel steering, forward)
12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward)

Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Smoking system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm)
CG (Center of Gravity) 180-185 mm leading edge of main wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing carbon tube L=850mm external diameter 20mmx1
Horizontal Stabilizer tube L=425mm external diameter 8mmx1
Accessories Bag 1 x1
Screw (HA3x14mm)x6 (Engine)
Oil tank overflow exhaust seat plugx1
Marking tapex1
100mm signal linex8
100mm High precision Y-linex1
Manualx1(Temporarily lacking)

REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included)
According to engine matching Power Batteryx1(required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$2,999.90

Add to Cart

HSDJETS 1800mm SUPER VIPER FRP Turbine Silver Lattice Colors PNP

SPECIFICATIONS:
Wingspan 1800mm (70.87in)
Length 2000mm (78.74in)
Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil
Recommended engine thrust 10-12 kg / 20-26.4 (lb)
Cruising speed 260 km/h
Flying time 6-8 mins
Wing area 67.94 dm2
Wing load 174.57 g/dm2
Main material FRP
Painting surface Highlight environmental protection paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)

Servos
25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward)
25gx2 Metal gear with 90mm lead (Flap, forward)
25gx2 Metal gear with 90mm lead (Elevator, forward)
12gx1 Metal gear with 500mm lead (Nose wheel steering, forward)
12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward)

Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Smoking system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm)
CG (Center of Gravity) 180-185 mm leading edge of main wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing carbon tube L=850mm external diameter 20mmx1
Horizontal Stabilizer tube L=425mm external diameter 8mmx1
Accessories Bag 1 x1
Screw (HA3x14mm)x6 (Engine)
Oil tank overflow exhaust seat plugx1
Marking tapex1
100mm signal linex8
100mm High precision Y-linex1
Manualx1(Temporarily lacking)

REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included)
According to engine matching Power Batteryx1(required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$2,999.90

Add to Cart

HSDJETS 1800mm SUPER VIPER FRP Turbine Triangular Star Colors PN

SPECIFICATIONS:
Wingspan 1800mm (70.87in)
Length 2000mm (78.74in)
Flying Weight 10.88kg (23.94 lb) w/o complete engine, w/battery & 3200cc oil
Recommended engine thrust 10-12 kg / 20-26.4 (lb)
Cruising speed 260 km/h
Flying time 6-8 mins
Wing area 67.94 dm2
Wing load 174.57 g/dm2
Main material FRP
Painting surface Highlight environmental protection paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ?10mins ?30mins ?60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085
Recommended Receiver Battery 2S / 7.4V / 5200 mAh Li-Po XT60 Plug×2 PCS(required & not included)
Recommended Power Battery According to engine matching (required & not included)

Servos
25gx3 Metal gear with 90mm lead (Left & right ailerons & rudder, forward)
25gx2 Metal gear with 90mm lead (Flap, forward)
25gx2 Metal gear with 90mm lead (Elevator, forward)
12gx1 Metal gear with 500mm lead (Nose wheel steering, forward)
12gx1 Metal gear with 500mm lead (Front landing gear cover plate, forward)

Servo material 7.4V high-voltage high-speed metal gear, aluminum middle shell digital
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Smoking system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Outer box (extra hard carton) + Inner box (extra hard carton) + Card strip/1400x485x720 (mm)
CG (Center of Gravity) 180-185 mm leading edge of main wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing carbon tube L=850mm external diameter 20mmx1
Horizontal Stabilizer tube L=425mm external diameter 8mmx1
Accessories Bag 1 x1
Screw (HA3x14mm)x6 (Engine)
Oil tank overflow exhaust seat plugx1
Marking tapex1
100mm signal linex8
100mm High precision Y-linex1
Manualx1(Temporarily lacking)

REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
2S / 7.4V / 5200 mAh Li-Po XT60 Plugx2 PCS (required & not included)
According to engine matching Power Batteryx1(required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$2,999.90

Add to Cart

0000894_hsdjets-hl-39-foam-turbine-blue-camo-colors-kit.jpg

HSDJETS HL-39 Foam Turbine Blue Camo KIT

SPECIFICATIONS:
Wingspan: 1665 mm (65.6 in)
Length: 1916 mm (75.4 in)
Weight: 8.5kg (18.7 lb)
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 100?140 km/h (For reference only)
Flying time: 4?6 mins (full throttle) (For reference only)
Wing area: 54 dm2
Wing load: 195 g/dm2 (For reference only)
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty: ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature: 0??40?
Radio System: 9 channel (required & not included)
Control System: MFC-2085 (required & not included)

Servos (required & not included)
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Battery: 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Retarder plate Yes
Smoke System No
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /52.87×20.28×17.72 (inch)
CG (Center of Gravity) 120?125mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×12 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male + JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs

REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$679.90

Add to Cart

0000889_hsdjets-hl-39-foam-turbine-blue-camo-colors-pnp.jpg

HSDJETS HL-39 Foam Turbine Blue Camo PNP XT60

SPECIFICATIONS:

Wingspan: 1665 mm (65.6 in)
Length: 1916 mm (75.4 in)
Flying Weight: 10.5kg (23.1 lb) with 1800cc Aviation kerosene and 750cc smoke
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 100?140 km/h
Flying time: 4?6 mins (full throttle)
Wing area: 54 dm2
Wing load: 195 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System:9 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Battery: 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: Yes
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
LED lights system: Yes
Electromagnetic brake system: Yes
Retarder plate: Yes
Smoke System: Selective configuration (not included)
Reinforced gyro: Selective configuration (not included)
Packaging / Size: Packing Box + Outer Box (Card mark)/52.87×20.28×17.72(inch)
CG (Center of Gravity): 120?125mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gear×3
Battery Charger: LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male + JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs

REQUIRES:

SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,549.90

Add to Cart

0000904_hsdjets-hl-39-foam-turbine-bnhsdjets-colors-kit.jpg

HSDJETS HL-39 Foam Turbine BNHSDJETS KIT

SPECIFICATIONS:
Wingspan: 1665 mm (65.6 in)
Length: 1916 mm (75.4 in)
Weight: 8.5kg (18.7 lb)
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 100?140 km/h (For reference only)
Flying time: 4?6 mins (full throttle) (For reference only)
Wing area: 54 dm2
Wing load: 195 g/dm2 (For reference only)
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty: ??10mins ???30mins ???60mins (For reference only)
Suitable for ambient temperature: 0??40?
Radio System: 9 channel (required & not included)
Control System: MFC-2085 (required & not included)

Servos (required & not included)
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Battery: 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
Retarder plate Yes
Smoke System No
LED lights system Selective configuration (not included)
Electromagnetic brake system Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /52.87×20.28×17.72 (inch)
CG (Center of Gravity) 120?125mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×12 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male + JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs

REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$679.90

Add to Cart

0000899_hsdjets-hl-39-foam-turbine-bnhsdjets-colors-pnp.jpg

HSDJETS HL-39 Foam Turbine BNHSDJETS PNP XT60

SPECIFICATIONS:

Wingspan: 1665 mm (65.6 in)
Length: 1916 mm (75.4 in)
Flying Weight: 10.5kg (23.1 lb) with 1800cc Aviation kerosene and 750cc smoke
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 100?140 km/h
Flying time: 4?6 mins (full throttle)
Wing area: 54 dm2
Wing load: 195 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40C
Radio System:9 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 80mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (Elevator×2 & Rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Battery: 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: Yes
Elevator (Horizontal tail): Yes
Rudder (Vertical tail): Yes
LED lights system: Yes
Electromagnetic brake system: Yes
Retarder plate: Yes
Smoke System: Selective configuration (not included)
Reinforced gyro: Selective configuration (not included)
Packaging / Size: Packing Box + Outer Box (Card mark)/52.87×20.28×17.72(inch)
CG (Center of Gravity): 120?125mm from the leading edge of the Main Wing
Landing Gears: Metal electric retractable hydraulic landing gear×3
Battery Charger: LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=598mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=598mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=600mm external diameter 6mm×1 pcs
Accessories Bag×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM4×10mm)×8 pcs (Wing)
Screw (PWM6×70mm)×8 pcs (Nose)
100mm signal line(JR male + JR male)×8 pcs
Pneumatic tube×2 pcs
Cue streamers×1 pcs
Buckle×1 pcs
Anti-corrosion rubber plug×1 pcs
Manual×1 pcs

REQUIRES:

SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,549.90

Add to Cart

HSDJETS T-33 Foam Turbine Thunderbirds Colors PNP XT60 plug

SPECIFICATIONS:

Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs

REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required & not included)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,549.90

Add to Cart

HSDJETS T-33 Foam Turbine Thunderbirds Colors PNP+SWH-80B

SPECIFICATIONS:

Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless (required)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs

REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$3,229.90

Add to Cart

HSDJETS T-33 Foam Turbine Yellow ribbon Colors PNP+SWH-80B

SPECIFICATIONS:

Wingspan: 2018 mm (79.4 in)
Length: 1800 mm (70.9 in)
Flying Weight: 10.7kg (23.5 lb) with 1800cc Aviation kerosene
Turbine Engine: SW80B 8KG brushless (required)
Cruising speed: 150?200 km/h
Flying time: 3?5 mins (full throttle)
Wing area: 56.5 dm2
Wing load: 184.1 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System: 7 channel (required & not included)
Control System: MFC-2085

Servos
7.4V 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
7.4V 25g×2 Metal gear with 230mm lead (Flap×2 forward)
7.4V 25g×3 Metal gear with 80mm lead (elevator×2 & rudder×1 forward)
7.4V 12g×1 Metal gear with 380mm lead with protection function (Nose wheel steering forward)
7.4V 12g×1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)

Recommended Battery 2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/52.56×21.3×16.9(inch)
CG (Center of Gravity) 180mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1 pcs
Left main wing×1 pcs
Right main wing×1 pcs
Left Horizontal tail ×1 pcs
Right Horizontal tail×1 pcs
Vertical tail×1 pcs
Nose×1 pcs
Cockpit×1 pcs
Left auxiliary tank×1 pcs
Right auxiliary tank×1 pcs
1# Main wing carbon tube L=820mm external diameter 16mm×1 pcs
2# Main wing carbon tube L=760mm external diameter 10mm×1 pcs
Horizontal Stabilizer carbon tube L=650mm external diameter 6mm×1 pcs
Accessories Bag 1 ×1 pcs
Screw (HM3×10mm)×8 pcs (Horizontal tail)
Screw (HA3×10mm)×8 pcs (Vertical tail / Tail nozzle)
Screw (HA3×14mm)×8 pcs (Engine)
Screw (HM3×14mm)×8 pcs (Wing)
Screw (HM4×25mm)×8 pcs (Auxiliary tank)
Screw (PWM6×70mm)×6 pcs (Nose)
Accessories Bag 2 ×1 pcs
100mm signal line(JR male+JR male) ×8 pcs
Manual×1 pcs

REQUIRES:
SW80B 8KG brushless / SW60B 6KG brushless (required)
7 channel radio system (radio & receiver) (required & not included)
2S,7.4V,5200mAh×2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$3,229.90

Add to Cart

HSDJETS Super Viper Foam Turbine Navy Colors PNP

SPECIFICATIONS:

Wingspan: 1500mm (59.1in)
Length: 1663mm (65.5in)
Flying Weight: 6.5kg (14.3 lb)
Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included)
Cruising speed:250 km/h
Flying time: 5 mins (full throttle)
Wing area: 34.28 dm2
Wing load:189.6 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System 8 channel: (required & not included)
Control System MFC-2085

Servos
25g×2 Metal gear with 480mm lead (left & right ailerons forward)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
25g×2 Metal gear with 80mm lead (elevator forward)
12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
12g×1 Metal gear (360°lock Hatch cover forward)

Recommended Battery 2S,7.4V,1800?2000mAh×2,LiPo with T type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5×46×39.5(cm)
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1
Left Wing×1
Right Wing×1
Left Horizontal Stabilizer×1
Right Horizontal Stabilizer×1
Vertical Stabilizer×1
Nose×1
Cockpit canopy×1
Main wing carbon tube L=598mm external diameter 16mm×1
Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
Sticker×1
Capping board×1
Accessories Bag 1 ×1
Nylon rocker arm of the servo ×2
Double sided sponge paper×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×10mm)×4 (Tail nozzle)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Accessories Bag 2 ×1
L type 3mm inner six corner board hand×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Manual×1

REQUIRES:
SW60 6KG brushed / SW60B 6KG brushless (required & not included)
8 channel radio system (radio & receiver) (required & not included)
2S,7.4V,1800?2000mAh×2,LiPo with T type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,399.90

Add to Cart

HSDJETS Super Viper Foam Turbine Red Colors PNP

SPECIFICATIONS:

Wingspan: 1500mm (59.1in)
Length: 1663mm (65.5in)
Flying Weight: 6.5kg (14.3 lb)
Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included)
Cruising speed:250 km/h
Flying time: 5 mins (full throttle)
Wing area: 34.28 dm2
Wing load:189.6 g/dm2
Main material: 20 times EPO
Painting surface: matte paint
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0??40?
Radio System 8 channel: (required & not included)
Control System MFC-2085

Servos
25g×2 Metal gear with 480mm lead (left & right ailerons forward)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
25g×2 Metal gear with 80mm lead (elevator forward)
12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
12g×1 Metal gear (360°lock Hatch cover forward)

Recommended Battery 2S,7.4V,1800?2000mAh×2,LiPo with T type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5×46×39.5(cm)
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselage×1
Left Wing×1
Right Wing×1
Left Horizontal Stabilizer×1
Right Horizontal Stabilizer×1
Vertical Stabilizer×1
Nose×1
Cockpit canopy×1
Main wing carbon tube L=598mm external diameter 16mm×1
Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
Sticker×1
Capping board×1
Accessories Bag 1 ×1
Nylon rocker arm of the servo ×2
Double sided sponge paper×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×10mm)×4 (Tail nozzle)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Accessories Bag 2 ×1
L type 3mm inner six corner board hand×1
Screw (HM4×35mm)×4 (Nose)
Screw (HM3×14mm)×2 (Wing)
Screw (HM3×10mm)×2 (Wing)
Screw (PA3×14mm)×4 (Engine)
Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
Manual×1

REQUIRES:
SW60 6KG brushed / SW60B 6KG brushless (required & not included)
8 channel radio system (radio & receiver) (required & not included)
2S,7.4V,1800?2000mAh×2,LiPo with T type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,399.90

Add to Cart

0000922_hsdjets-hf-16-foam-turbine-belgian-colors-kit.jpg

HSDJETS F-16 Foam Turbine Belgian Colors KIT V2.1

NOT RECOMMENDED FOR GRASS RUNWAYS

SPECIFICATIONS:
Wingspan: 1344mm (52.9in)
Length: 1809mm (71.2in)
Flying Weight ----
Turbine Engine 6-8KG brushless (required & not included)
Cruising speed ----
Flying time ----
Wing area 47.6 dm2
Wing load ----
Main material 20 times the import of aeromodelling EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
Suitable for ambient temperature 0C-40C
Radio System 6 channel (required & not included)
Control System ----

Servos (required & not included)
40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward)
25gx2 Metal gear with 150mm lead (left & right Aileron forward)
25gx1 Metal gear with 230mm lead (Rudder forward)
12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward)
12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward)
12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward)
12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward)
Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system No
Electromagnetic brake system No
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/1456x518x337(mm)
CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing
Landing Gears ----
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Nosex1
Cockpit canopyx1
Vertical Stabilizerx1
Left Horizontal tailx1
Right Horizontal tailx1
L/R Auxiliary tank x1
L/R wingtip missile x1
L/R wingtip missile pylon x1
L/R No.1 missile x1
L/R No.2 missile x1
L/R tail fins x1
Main wing carbon tube L=400mm external diameter 10mmx2
Accessories Bag x1
Fuselage antenna x1
Pitotx1
Screw (HA3x14mm)x10 (Nose & Engine)
Screw (HM3x6mm)x2 (Horizontal tail)
Screw (HA3x10mm)x8 (Tail nozzle & Vertical)
Screw (KA3x16mm)x8 (Missile)
Screw (KA3x20mm)x8 (Missile)
Screw (KM3x60mm)x8 (Auxiliary tank)
Screw (HM3x10mm)x8 (Main wing)
HF-16 V2 Manualx1
MFC-2085 Manualx1

REQUIRES:
SW 6-8KG brushless (required & not included)
6 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$599.90

Add to Cart

0000751_hsdjets-hf-16-foam-turbine-belgian-colors-pnp.jpg

HSDJETS F-16 Foam Turbine Belgian Colors PNP V2.1

Not recommended for grass runways

SPECIFICATIONS:
Wingspan: 1344mm (52.9in)
Length: 1809mm (71.2in)
Flying Weight: 8.5kg (18.7 lb) (with 1800cc Aviation kerosene)
Turbine Engine: 6-8KG brushless (required & not included)
Cruising speed: 150-200 km/h
Flying time: 3-5 mins
Wing area: 47.6 dm2
Wing load: 178.6 g/dm2
Main material: 20 times the import of aeromodelling EPO
Painting surface: Matte environmental water-borne paint + decal
Suitable experience level: ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty: ??10mins ???30mins ???60mins
Suitable for ambient temperature: 0C-40
Radio System: 6 channel (required & not included)
Control System: MFC-2085

Servos (All 7.4V High voltage)
40gx2 Metal gear with 60mm lead (left & right Horizontal tail forward)
25gx2 Metal gear with 150mm lead (left & right Aileron forward)
25gx1 Metal gear with 230mm lead (Rudder forward)
12gx2 Metal gear with 480mm lead (with protection function) (Left & right rear cover plate forward)
12gx1 Metal gear with 480mm lead (with protection function) (Front cover plate forward)
12gx1 Metal gear with 320mm lead (with protection function) (Front wheel steering forward)
12gx1 Metal gear with 480mm lead (Front wheel 360 locking forward)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking reverse)
12gx1 Metal gear with 480mm lead (Rear wheel 360 locking forward)
Recommended Battery 2S,7.4V,3300-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
The smoke system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /1456x518x337(mm)
CG (Center of Gravity) 155-160mm from the leading edge of the Main Wing
Landing Gears All-metal simulation electronic retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Nosex1
Cockpit canopyx1
Vertical Stabilizerx1
Left Horizontal tailx1
Right Horizontal tailx1
L/R Auxiliary tankx1
L/R wingtip missilex1
L/R wingtip missile pylonx1
L/R No.1 missilex1
L/R No.2 missilex1
L/R tail finsx1
Main wing carbon tube L=400mm external diameter 10mmx2
Accessories Bag x1
Fuselage antenna x1
Pitotx1
Screw (HA3x14mm)x10 (Nose & Engine)
Screw (HM3x6mm)x2 (Horizontal tail)
Screw (HA3x10mm)x8 (Tail nozzle & Vertical)
Screw (KA3x16mm)x8 (Missile)
Screw (KA3x20mm)x8 (Missile)
Screw (KM3x60mm)x8 (Auxiliary tank)
Screw (HM3x10mm)x8 (Main wing)
HF-16 V2 Manualx1
MFC-2085 Manualx1

REQUIRES:
SW 6-8KG brushless (required & not included)
6 channel radio system (radio & receiver) (required & not included)
2S,7.4V,3300-5200mAhx2,LiPo with XT60 plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,569.90

Add to Cart

HSDJETS S-EDF 120mm HF-86 Yellow ribbon Colors KIT

SPECIFICATIONS:
Wingspan 1720 mm (67.7 in)
Length 1715 mm (67.5 in)
Flying Weight ------
Flying time ------
Wing area 64.34 dm2
Wing load ------
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 8 channel (required & not included)
Control System MFC-2085 (required & not included)
Motor 5268-KV640(Inner rotor) (required & not included)
EDF S-EDF 120mm-10 blade (required & not included)
ESC Hobbywing 160A brushless (required & not included)

Servos (required & not included)
25gx2 Metal gear with 560mm lead (Left & Right ailerons forward)
25gx2 Metal gear with 410mm lead (Left & Right flap forward)
25gx3 Metal gear with 190mm lead (Left & Right Elevator / Vertical tail forward)
25gx1 Metal gear with 230mm lead (Front wheel cover plate forward)
7.4V 12gx3 Metal gear with 380mm lead with protection function (Nose wheel steering / Rear wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Retarder plate forward)

Recommended Power Battery 6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)

Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system No (required & not included)
Electromagnetic brake system No (required & not included)
Retarder plate Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Pearl cotton 3D Inner box + Outer Box /1320x550x440(mm)
CG (Center of Gravity) 300-305mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
Left Auxiliary oil tankx1 pcs
Right Auxiliary oil tankx1 pcs
Horizontal tailx1 pcs
Main wing bolt rod 1 L=720mm external diameter 20mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HA4x45mm)x4 pcs (Horizontal tail)
Screw (HM4x20mm)x4 pcs (Main wing)
Screw (HM4x16mm)x4 pcs (Main wing)
Screw (HA3x10mm)x16 pcs (Vertical tail)
Screw (HM4x60mm)x4 pcs (Nose + Fuselage)
Screw (HM4x70mm)x8 pcs (Auxiliary oil tank)
Accessories Bag 2 x1 pcs
100mm signal line (JR male + JR male)x8 pcs
Head fixed plastic partsx4 pcs
3mm L-type hexagon wrenchx1 pcs
4mm L-type hexagon wrenchx1 pcs
Wing antenna x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs

REQUIRES:
8 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5200mAh,45Cx2,LiPo with AS150 type plug (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$599.90

Add to Cart

HSDJETS S-EDF 105mm Super Viper Navy Colors KIT

SPECIFICATIONS:
Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight ---
S-EDF/Motor S-EDF 105mm 4258/700KV brushless (required & not included)
Number of EDF Blade 11 blades (required & not included)
Cruising speed ---
Flying time ---
Wing area 34.28 dm2
Wing load ---
Main material 35 times EPO
Painting surface matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
ESC 160A/12S Hobbywing AS150 (required & not included)
UBEC 6A (2P Du-Pont and JR connector) (required & not included)
Control System Integrated Mix-Control system (required & not included)
Servos (required & not included)
25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Recommended Receiver Battery 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included)
Recommended Power Battery 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system Yes (required & not included)
LED lights system Yes (required & not included)
Electromagnetic brake system Yes (required & not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing aluminum tube L=598mm external diameter 16mmx1
Horizontal Stabilizer tube L=500mm external diameter 6mmx1
Stickerx1
Accessories Bag 1 x1
Screw (PWM4x35mm)x4 (Nose)
Screw (PM3x14mm)x2 (Wing)
Screw (PM3x10mm)x2 (Wing)
Screw (PA2x12mm)x4
Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer)
Manualx1

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included)
2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included)
LiPo battery charger (required & not included)
S-EDF 105mm 4258/700KV brushless (required & not included)
11 blades (required & not included)
ESC:160A/12S Hobbywing AS150 (required & not included)
UBEC:6A (2P Du-Pont and JR connector) (required & not included)
Integrated Mix-Control system (required & not included)
Servo (required & not included):25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Landing gear: Metal electric retractable hydraulic landing gearx3 (required & not included)
General landing gear control system (required & not included)
LED lights system (required & not included)
Electromagnetic brake system (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$469.90

Add to Cart

HSDJETS S-EDF 105mm Super Viper Red Colors KIT

SPECIFICATIONS:
Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight ---
S-EDF/Motor S-EDF 105mm 4258/700KV brushless (required & not included)
Number of EDF Blade 11 blades (required & not included)
Cruising speed ---
Flying time ---
Wing area 34.28 dm2
Wing load ---
Main material 35 times EPO
Painting surface matte paint
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 7 channel (required & not included)
ESC 160A/12S Hobbywing AS150 (required & not included)
UBEC 6A (2P Du-Pont and JR connector) (required & not included)
Control System Integrated Mix-Control system (required & not included)
Servos (required & not included)
25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Recommended Receiver Battery 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included)
Recommended Power Battery 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system Yes (required & not included)
LED lights system Yes (required & not included)
Electromagnetic brake system Yes (required & not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm)
CG (Center of Gravity) 6.69in from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3 (required & not included)
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Main wing aluminum tube L=598mm external diameter 16mmx1
Horizontal Stabilizer tube L=500mm external diameter 6mmx1
Stickerx1
Accessories Bag 1 x1
Screw (PWM4x35mm)x4 (Nose)
Screw (PM3x14mm)x2 (Wing)
Screw (PM3x10mm)x2 (Wing)
Screw (PA2x12mm)x4
Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer)
Manualx1

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included)
2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included)
LiPo battery charger (required & not included)
S-EDF 105mm 4258/700KV brushless (required & not included)
11 blades (required & not included)
ESC:160A/12S Hobbywing AS150 (required & not included)
UBEC:6A (2P Du-Pont and JR connector) (required & not included)
Integrated Mix-Control system (required & not included)
Servo (required & not included):25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25gx2 Metal gear with 480mm lead (Flap forward)
25gx2 Metal gear with 80mm lead (Elevator forward)
12gx1 Metal gear with 450mm lead (Nose wheel steering forward)
12gx1 Metal gear with 300mm lead (360lock Hatch cover forward)
Landing gear: Metal electric retractable hydraulic landing gearx3 (required & not included)
General landing gear control system (required & not included)
LED lights system (required & not included)
Electromagnetic brake system (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$469.90

Add to Cart

HSDJETS S-EDF 105mm Super Viper Red Colors PNP 12S

SPECIFICATIONS: Wingspan: 1500mm (59.1in) Length: 1663mm (65.5in) Flying Weight: 5kg (11 lb) with 12S Battery S-EDF/Motor: S-EDF 105mm 4258/700KV brushless Number of EDF Blade: 11 blades Cruising speed: about 180 km/h Flying time: about 3-5 mins Wing area: 34.28 dm2 Wing load: 145.9 g/dm2 Main material: 35 times EPO Painting surface: matte paint Suitable for ambient temperature: 0C-40C Radio System: 7 channel (required & not included) ESC: 160A/12S Hobbywing AS150 UBEC: 6A (2P Du-Pont and JR connector) Control System Integrated Mix-Control system Servos 25gx3 Metal gear with 190mm lead (Left & right ailerons & rudder forward) 25gx2 Metal gear with 480mm lead (Flap forward) 25gx2 Metal gear with 80mm lead (Elevator forward) 12gx1 Metal gear with 450mm lead (Nose wheel steering forward) 12gx1 Metal gear with 300mm lead (360 lock Hatch cover forward) Recommended Receiver Battery: 2S,7.4V,1800-2000mAh,LiPo with T type plug (required & not included) Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included) Ailerons: Yes Flaps: Yes Elevator (Horizontal tail): Yes Rudder (Vertical tail): Yes General landing gear control system: Yes LED lights system: Yes Electromagnetic brake system: Yes Reinforced gyro Selective configuration (not included) Packaging / Size Packing Box + Outer Box (Card mark)/132.5x46x39.5(cm) CG (Center of Gravity) 6.69in from the leading edge of the Main Wing Landing Gears: Metal electric retractable hydraulic landing gearx3 Battery Charger LiPo battery charger (required & not included) PACKAGE INCLUDES: Fuselagex1 Left Wingx1 Right Wingx1 Left Horizontal Stabilizerx1 Right Horizontal Stabilizerx1 Vertical Stabilizerx1 Nosex1 Cockpit canopyx1 Main wing aluminum tube L=598mm external diameter 16mmx1 Horizontal Stabilizer tube L=500mm external diameter 6mmx1 Stickerx1 Accessories Bag 1 x1 Screw (PWM4x35mm)x4 (Nose) Screw (PM3x14mm)x2 (Wing) Screw (PM3x10mm)x2 (Wing) Screw (PA2x12mm)x4 Screw (PA3x8mm)x8 (Horizontal Stabilizer/Vertical Stabilizer) Manualx1 REQUIRES: 7 channel radio system (radio & receiver) (required & not included) 6S,22.2V,5000-6000 mAh LiPo with AS150 type connectorx2(required & not included) 2S,7.4V,1800-2000 mAh LiPo with T type connectorx1(required & not included) LiPo battery charger (required & not included) Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$999.90

Add to Cart

HSDJETS Double S-EDF90mm HME-262 Green Camo Colors PNP

SPECIFICATIONS:
Wingspan 1890 mm (74.4 in)
Length 1626 mm (64 in)
Flying Weight 7kg (15.4 lb)
Flying time About 5 mins
Wing area 52.3 dm2
Wing load 133.8 g/dm2
Main material 35 times EPO
Painting surface Matte environmental water-borne paint + decal + Gloss oil
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0?-40?
Radio System 7 channel (required & not included)
Control System MFC-2085-DR
Motor 3560-1550KV(Outer rotor)x2 pcs
EDF S-EDF 90mm 12 Bladex2 pcs
ESC 100Ax2 pcs

Servos
25gx2 Metal gear with 480mm lead (left & right ailerons forward)
25gx2 Metal gear with 330mm lead (left & right outer flap forward)
25gx1 Metal gear with 230mm lead (Vertical tail forward)
25gx4 Metal gear with 80mm lead (Elevatorx2 & L/R inner flap forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Nose wheel steering forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery 6S,22.2V,5000-6000mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/1400x525x335(mm)
CG (Center of Gravity) 145-150mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Vertical tailx1 pcs
Left power groupx1 pcs
Right power groupx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Main wing bolt rod L=670mm external diameter 16mmx1 pcs
Horizontal Stabilizer bolt rod L=500mm external diameter 6mmx1 pcs
Accessories Bag 1x1 pcs
Screw (HA3x10mm)x16 pcs (S-EDF)
Screw (HM3x10mm)x20 pcs
Accessories Bag 2x1 pcs
100mm signal line (JR male+JR male)x8 pcs
100mm High precision Y-line (JR male+JR male)x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000-6000,45Cx2,LiPo with XT90 type plug (required & not included)
2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

$1,249.90

Add to Cart

Categories

Featured [more]

Information

HSD Jets

Featured Products

Monthly Specials For December

Bestsellers

Manufacturers

Reviews [more]

Specials [more]

Who's Online

LATEST PRODUCTS

EXTRAS

GET IN TOUCH

SUPPORTS

Categories

Featured [more]

Information

HSD Jets

HSDJETS HF-16 V2.1 Foam Turbine Red white blue Colors PNP

HSDJETS HF-86 Foam Turbine Sky Blazer Colors PNP

HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors KIT

HSDJETS HF-86 Foam Turbine Yellow Ribbon Colors PNP

HSDJETS HJ-10 Foam Turbine Black PNP with Vectoring nozzle

HSDJETS HJ-10 Foam Turbine CAF NEW (DARK BLUE) Colors KIT

HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors PNP

HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors KIT

HSDJETS S-EDF 105mm HF-16 V2 Red white blue Colors PNP

HSDJETS S-EDF90mm HBY-747 KLM Colors KIT

HSDJETS S-EDF90mm HBY-747 KLM Colors PNP

My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors KIT

My Hobby HT-45 by HSDJETS Foam Turbine Blue Navy Colors PNP

My Hobby HT-45 by HSDJETS Foam Turbine Navy Colors PNP

HSDJETS 1800mm SUPER VIPER FRP Turbine Navy Colors PNP

HSDJETS 1800mm SUPER VIPER FRP Turbine Red Colors PNP

HSDJETS 1800mm SUPER VIPER FRP Turbine Silver Lattice Colors PNP

HSDJETS 1800mm SUPER VIPER FRP Turbine Triangular Star Colors PN

HSDJETS HL-39 Foam Turbine Blue Camo KIT

HSDJETS HL-39 Foam Turbine Blue Camo PNP XT60

HSDJETS HL-39 Foam Turbine BNHSDJETS KIT

HSDJETS HL-39 Foam Turbine BNHSDJETS PNP XT60

HSDJETS T-33 Foam Turbine Thunderbirds Colors KIT

HSDJETS T-33 Foam Turbine Thunderbirds Colors PNP XT60 plug

HSDJETS T-33 Foam Turbine Thunderbirds Colors PNP+SWH-80B