My Hobby BA Hawk by HSDJETS Foam Turbine Red Hawk Colors PNP

SPECIFICATIONS:
Wingspan 1500 mm (59.1 in)
Length 1900 mm (74.8 in)
Flying Weight 9.2kg (20.2 lb) with 1800cc Aviation kerosene
Configuration of turbine engine 8KG (required & not included)
Cruising speed -200 km/h
Flying time 4-6 mins (full throttle)
Wing area 47 dm2
Wing load 195.7 g/dm2
Main material 20 times EPO
Painting surface Matte environmental water-borne paint + decal
Suitable experience level ?Zero basis ?Beginner ?Intermediate ?Advanced
PNP Assembly difficulty ??10mins ???30mins ???60mins
Suitable for ambient temperature 0C-40C
Radio System 9 channel (required & not included)
Control System MFC-2085
 

Servos
7.4V 40gx1 Metal gear with 80mm lead (Elevator forward)
7.4V 25gx2 Metal gear with 560mm lead (Left & right ailerons forward)
7.4V 25gx2 Metal gear with 410mm lead (Left & right flaps x2 forward)
7.4V 25gx1 Metal gear with 80mm lead (Rudderx1 forward)
7.4V 17gx4 Metal gear with 180mm lead (Left & right Leading edge flapx4 forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Left & right Speed brake x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Front wheel steering / cover plate x2 forward)
7.4V 12gx2 Metal gear with 600mm lead with protection function (Rear wheel cover plate x2 forward)
Recommended Battery 2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator Yes
Rudder (Vertical tail) Yes
The smoke system Included
Speed brake Yes
LED lights system Yes
Electromagnetic brake system Yes
Leading edge flap Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/55.9x19.7x16.5(inch)
CG (Center of Gravity) 161 mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3(Nose gear double wheel)
Battery Charger LiPo battery charger (required & not included)
 

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Cockpitx1 pcs
Vertical tailx1 pcs
L&R Horizontal tailx1 pcs
Main wing carbon tube L=730mm external diameter 15.6mmx1 pcs
Accessories Bag 1 x1 pcs
Screw (HM3x10mm)x10 pcs (Wing/Horizontal tail/Vertical tail)
Screw (HM4x50mm)x4 pcs (Nose)
Accessories Bag 2 x1 pcs
100mm signal line(JR male + JR male) x8 pcs
Accessories Bag 3 x1 pcs
Filler tube x1 pcs
Left and right pitot tubes x2 pcs
Nose radar antenna x1 pcs
Upper and lower fuselage antenna x2 pcs
Remove the ribbon before flight x1 pcs
Oil tank overflow vent plug x1 pcs
Manualx1 pcs

REQUIRES:
8KG turbine engine (required & not included)
9 channel radio system (radio & receiver) (required & not included)
2S,7.4V,2200-5200mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

Pricing and availability subject to change without notice. If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.