All Products

3/16" dia. 1-1/2" long axles for BVM Duro-Struts, precision ground stainless steel Includes nylon washers and E clips

3/16" dia. 1-1/2" long axles for BVM Duro-Struts, precision ground stainless steel Includes nylon washers and E clips

3/16" dia. 1-1/2" long axles for BVM Duro-Struts, precision ground stainless steel Includes nylon washers and E clips

3/16" dia. Axles for 3/16" Wire Struts, precision ground and plated Includes nylon washers and E clips

3/16" dia. Axles for 3/16" Wire Struts, precision ground and plated Includes nylon washers and E clips

3/16" dia. Axles for 3/16" Wire Struts, precision ground and plated Includes nylon washers and E clips

3/16" dia. axles for 5/32" wire struts, precision ground and plated Includes nylon washers and E clips

3/16" dia. axles for 5/32" wire struts, precision ground and plated Includes nylon washers and E clips

3/16" dia. axles for 5/32" wire struts, precision ground and plated Includes nylon washers and E clips

3/16" Hexdriver Tool & Bolt

3/16" Hexdriver Tool & Bolt

3/16" Hexdriver Tool & Bolt

3/16", single coil Main Wire Struts - pr

3/16", single coil Main Wire Struts - pr

3/16", single coil Main Wire Struts - pr

3/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.

3/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.

3/8 Long Button Head Panel Screws 25pk Jets, WWII models and even scale helicopters sometimes require removable panels that yield access to servos and other components. Jets also have other special requirements, such as attaching thin fiberglass parts. The socket head panel screws (SHPS) from BVM may be just what's needed to accomplish the task and have the finished product look great. The very small (5/32 dia) dome shaped head with its .050 hex socket and black finish will appear very scale-like in most applications. The 5/32 long or 3/8 long self-tap screw thread is just right for attaching thin fiberglass panels made from BVM's Poly Ply materials. DISCLAIMER: Occasionally our supplier substitutes silver screws for black. If you prefer to have only black screws, please note this when placing online or phone orders.

Discs Larger Cutting Disc 32mm diameter, complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Very controllable, cut a radius or straight. Tip:- Cut against the spin for greater accuracy & control. Fits Dremel, Proxxon, Flexi drives, hobby drills & Gerbil vacuum form trimmers. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fibreglass, Perspex, plastics, woods and ceramics. RPM 5,000 - 20,000. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fiberglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.

Discs Larger Cutting Disc 32mm diameter, complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Very controllable, cut a radius or straight. Tip:- Cut against the spin for greater accuracy & control. Fits Dremel, Proxxon, Flexi drives, hobby drills & Gerbil vacuum form trimmers. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fibreglass, Perspex, plastics, woods and ceramics. RPM 5,000 - 20,000. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fiberglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.

Discs Larger Cutting Disc 32mm diameter, complete with 3.1mm stainless steel arbor (M3 thread). Kerf / width of cut 2 mm approx. Very controllable, cut a radius or straight. Tip:- Cut against the spin for greater accuracy & control. Fits Dremel, Proxxon, Flexi drives, hobby drills & Gerbil vacuum form trimmers. Virtually unbreakable steel cutting discs, tungsten carbide grit welded to the edge. Tough enough to cut piano wire, (aeromodellers use this for under carriage legs) fibreglass, Perspex, plastics, woods and ceramics. RPM 5,000 - 20,000. Use on all composite materials, GRP, Carbon Fibre, PCB, Perspex, Plexiglass, Lexon, Fiberglass, Marble, Ceramics, Polystyrene, ABS, Plastics, Wood, Metal.

35mm Door Cylinder USED IN: BVM F-16 1:6 scale PNP Nose Gear Door BVM YAK130 1:4 PNP Main Gear Door BVM F-18 1:5.5 PNP Main Gear Door

35mm Door Cylinder USED IN: BVM F-16 1:6 scale PNP Nose Gear Door BVM YAK130 1:4 PNP Main Gear Door BVM F-18 1:5.5 PNP Main Gear Door

35mm Door Cylinder USED IN: BVM F-16 1:6 scale PNP Nose Gear Door BVM YAK130 1:4 PNP Main Gear Door BVM F-18 1:5.5 PNP Main Gear Door

Spar Slotters Spar Slotter, Coarse Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 180 US 60 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.

Spar Slotters Spar Slotter, Coarse Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 180 US 60 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.

Spar Slotters Spar Slotter, Coarse Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 180 US 60 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.

Spar Slotters Spar Slotter, FINE Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 320 US 120 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Finish laser cut plywood. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.

Spar Slotters Spar Slotter, FINE Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 320 US 120 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Finish laser cut plywood. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.

Spar Slotters Spar Slotter, FINE Grit, 3 mm (1/8"). Dims 150 x 10 x 3 mm. Grit equivalent UK 320 US 120 approx. Cut the perfect slots and grooves, or use as a safe edge tool. Finish laser cut plywood. Popular with scratch model builders. GRITTED ON ONE FACE ONLY. Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminum, Ceramics, Stone, Horn, Antler etc.